All Equipment Category Specs ↠ Skid Steer Loaders ↠ Caterpillar 272C

Caterpillar 272C Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 272C (See all Caterpillar 272C for sale)

Cab

FOPS	SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81, ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	11 ft (3 m)
Bucket Pin Reach - Maximum Lift	15 in (37 cm)
Bumper Overhang - Rear Axle	43 in (109 cm)
Clearance at Max Lift and Dump	8 ft (2 m)
Clearance at Maximum Lift and Dump	98 in (249 cm)
Departure Angle	26 degrees
Ground Clearance	9 in (22 cm)
Height - Top of Cab	7 ft (2 m)
Length - With Bucket on Ground	151 in (383 cm)
Length - Without Bucket	123 in (312 cm)
Length w/o Bucket	11 ft (3 m)
Length with Bucket	13 ft (4 m)
Maximum Dump Angle	51 degrees
Maximum Overall Height	162 in (411 cm)
Maximum Reach - With Arms Parallel	50 in (127 cm)
Rack Back Angle - Maximum Height	83 degrees
Reach - Maximum Lift/Dump	30 in (76 cm)
Reach at Max Lift and Dump	30 in (76 cm)
Turn Radius from Center - Bucket	89 in (226 cm)
Turn Radius from Center - Coupler	57 in (145 cm)
Turn Radius from Center - Rear	71 in (180 cm)
Turning Radius from Center - inc bucket	102 in (258 cm)
Turning Radius from Center - machine rear	58 in (148 cm)
Vehicle Width over Tires	66 in (168 cm)
Wheel Base	5 ft (1 m)
Wheelbase	5 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Bore	4 in (9 cm)
Displacement	201 cu in (3,294 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C3.4 DIT
Engine Power - ISO 14396	93 hp (69 kw)
Gross Power - SAE J1995	94 hp (70 kw)
Net Flywheel Power	90 hp (67 kw)
Net Power - EEC 80/1269	91 hp (68 kw)
Net Power - ISO 9249 EEC	91 hp (68 kw)
Net Power - SAE 1349	90 hp (67 kw)
Number of Cylinders	4
Power Measured @	2500 rpm
Stroke	5 in (12 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	43 hp (32 kw)
Loader Hydraulic Flow	22 gpm (83 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	33 gpm (125 lpm)
Maximum Loader Hydraulic Pressure	4061 psi
Pump Flow Capacity	22 gpm (83 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	7315 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	3,250 lbs (1,474 kg)
Operating Width	66 in (168 cm)
Tipping Angle	6500 degrees

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,315 lbs (3,318 kg)
Chain Box Fluid Capacity - each side	3 gal (11 l)
Cooling System Fluid Capacity	4 gal (14 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	26 gal (98 l)
Hydraulic System Fluid Capacity	15 gal (57 l)
Max Speed	7 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	8,292 lbs (3,761 kg)
Rated Operating Capacity	3,250 lbs (1,474 kg)
Rated Operating Capacity with Optional Counterweight	3,480 lbs (1,579 kg)
Tipping Load	6,500 lbs (2,948 kg)

Power Train

Travel Speed Forward	7 mph (12 kph)
Travel Speed Forward - 2-Speed Option	10 mph (16 kph)
Travel Speed Reverse	7 mph (12 kph)
Travel Speed Reverse - 2-Speed Option	10 mph (16 kph)

Service Refill Capacities

Chain Box - Each Side	3 gal (11 l)
Cooling System	4 gal (14 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	26 gal (98 l)
Hydraulic System	15 gal (57 l)
Hydraulic Tank	11 gal (42 l)

Weights

Operating Weight

8,362 lbs (3,793 kg)

See all of the Caterpillar 272Cs we have listed for sale.

A 2012 Caterpillar 272C From Pape Machinery for $59,500.00 USD

A Caterpillar 272C From Boyd CAT for $44,000.00 USD

A 2008 Caterpillar 272C From Ritchie Bros. Auctioneers for Auction Pricing

A 2010 Caterpillar 272C From Ritchie Bros. Auctioneers for Auction Pricing

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon