All Equipment Category Specs ↠ Skid Steer Loaders ↠ JCB 160

JCB 160 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: JCB (See all JCB Equipment for sale)
Model: 160 (See all JCB 160 for sale)

Dimensions

Clearance at Max Lift and Dump	7 ft (2 m)
Height - Top of Cab	6 ft (2 m)
Length w/o Bucket	8 ft (2 m)
Length with Bucket	11 ft (3 m)
Reach at Max Lift and Dump	23 in (57 cm)
Turning Radius from Center - inc bucket	74 in (187 cm)
Turning Radius from Center - machine rear	62 in (158 cm)
Wheelbase	3 ft (1 m)
Width Over Tires	5 ft (1 m)

Engine

Aspiration	Naturally aspirated
Displacement	134 cu in (2,201 cu cm)
Engine Model	404C-22
Number of Cylinders	4
Power Measured @	2600 rpm

Hydraulic System

Pump Flow Capacity	15 gpm (55 lpm)
Pump Type	Hydrostatic drive pumps
Relief Valve Pressure	2683 psi

Loader

Breakout Force	2998 psi
Bucket Capacity	0 cu yd (0 cu m)
Operating Load Rating	1,323 lbs (600 kg)
Tipping Angle	2645.6 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Chain Box Fluid Capacity - each side	5 gal (17 l)
Cooling System Fluid Capacity	2 gal (8 l)
Engine Oil Fluid Capacity	3 gal (9 l)
Fuel Capacity	21 gal (79 l)
Hydraulic System Fluid Capacity	8 gal (30 l)
Max Speed	6 mph (10 kph)
Operating Voltage	12 volts
Operational Weight	5,310 lbs (2,409 kg)
Tire Size	7.00 x 15 - 6 pr

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon