All Equipment Category Specs ↠ Wheel Loaders ↠ Caterpillar 904B

Caterpillar 904B Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 904B (See all Caterpillar 904B for sale)

Bucket

Breakout Force	8,003 lbs (3,630 kg)
Breakout Force - Reference Bucket	8,003 lbs (3,630 kg)
Bucket Capacity - heaped	1 cu yd (1 cu m)
Bucket Width	6 ft (2 m)
Dump Clearance at Max Raise	8 ft (2 m)
Reference Bucket Capacity	1 cu yd (1 cu m)
Type - Reference bucket	General purpose

Cab

FOPS	meets the following criteria: SAEJ1231 JAN81, ISO3449:1992
ROPS	meets the following criteria: SAEJ1040 MAY94, ISO 3471-1:1986

Dimensions

Dump Clearance at Max Lift	8 ft (2 m)
Height - Top of Cab	8 ft (2 m)
Hinge Pin - Max Height	10 ft (3 m)
Length w/ Bucket on Ground	16 ft (5 m)
Length with out Forks on Ground	18 ft (5 m)
Length with Bucket on Ground	18 ft (5 m)
Max Lift Height	10 ft (3 m)
Reach at Max Height and Dump	2 ft (1 m)
Reach at Max Lift and Dump	2 ft (1 m)
Tread Width	52 in (133 cm)
Width Over Tires	6 ft (2 m)

Engine

Aspiration	turbocharged
Bore	4 in (9 cm)
EEC 80/1269 Rating	52 hp (39 kw)
Gross Power	55 hp (41 kw)
ISO 9249 Rating	52 hp (39 kw)
Net Power	52 hp (39 kw)
Stroke	4 in (10 cm)

Hydraulic System

3rd Valve Flow	22 gpm (83 lpm)
Dump Time	0.8 seconds
Lower Time	3.2 seconds
Main Relief	3002 psi
Pump Flow Capacity	22 gpm (83 lpm)
Raise Time	4.5 seconds

Operating Specifications

Alternator Supplied Amperage	75 amps
Articulation	42 degrees
Breakout Force	8,003 lbs (3,630 kg)
Dump Height at Full Lift	8 ft (2 m)
Engine Oil Capacity	2 gal (8 l)
Engine Oil Fluid Capacity	2 gal (8 l)
Fuel Capacity	22 gal (83 l)
Full Turn Static Tipping Load - Bucket	5,511 lbs (2,500 kg)
Full Turn Static Tipping Load - Forks	4409 lb
Hydraulic Lift Capacity	7,464 lbs (3,386 kg)
Operating Voltage	12 volts
Oscillation +/-	8 degrees
Rack Back - Transport Position	45 degrees
Rated Bucket Capacity	1 cu yd (1 cu m)
Rated Operating Load at Full Turn - Bucket	2,756 lbs (1,250 kg)
Rated Operating Load at Full Turn - Forks	3527 lb
Reach - Without Teeth	2 ft (1 m)
Static Tipping Load - Bucket	6,568 lbs (2,979 kg)
Static Tipping Weight	6,568 lbs (2,979 kg)
Straight Tipping Load - Bucket	6,568 lbs (2,979 kg)
Transmission Fluid Capacity	2 gal (8 l)

Power Train, Axles and Brakes

Axle and Final Drives	Fixed front axle and oscillating rear axle with conventional differential and planetary gear reduction final drives
Brake Standards	Brake meets ISO 3450:1996
Maximum Travel Speeds - Forward and Reverse, High	12 mph (19 kph)
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low	4 mph (6 kph)
Service and Parking Brake	Service and Parking brake are combined in an oil immersed drop box
Transmission Type	Closed-loop, two-speed hydrostatic single-path transmission.

Service Refill Capacities

Cooling System	2 gal (8 l)
Engine Oil	2 gal (8 l)
Fuel Tank	22 gal (83 l)
Hydraulic System	11 gal (42 l)

Transmission

Max Speed - Forward	12 mph (19 kph)
Max Speed - Reverse	12 mph (19 kph)
Max Speed Forward	13 mph (20 kph)
Max Speed Reverse	13 mph (20 kph)
Number of Forward Gears	2
Number of Reverse Gears	2

Weights

Operating Weight

9,810 lbs (4,450 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon