All Equipment Category Specs ↠ Wheel Loaders ↠ Caterpillar 908

Caterpillar 908 Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 908 (See all Caterpillar 908 for sale)

Bucket

Breakout Force	13,710 lbs (6,219 kg)
Bucket Capacity - heaped	1 cu yd (1 cu m)
Dump Clearance at Max Raise	10 ft (3 m)

Cab

FOPS	meets the following criteria: SAE J231 JAN81, ISO 3449:1992
ROPS	meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986

Dimensions

Height - Top of Cab	9 ft (3 m)
Hinge Pin - Max Height	11 ft (3 m)
Length with Bucket on Ground	18 ft (5 m)
Tread Width	62 in (158 cm)
Wheelbase	7 ft (2 m)
Width Over Tires	7 ft (2 m)

Engine

Bore	4 in (9 cm)
EEC 80/1269 Rating	80 hp (60 kw)
Gross Power	84 hp (63 kw)
ISO 9249 Rating	80 hp (60 kw)
Net Power	76 hp (57 kw)
SAE J1349 Rating	80 hp (60 kw)
Stroke	5 in (12 cm)

Hydraulic System

3rd Valve Flow	22 gpm (82 lpm)
Dump Time	2.4 seconds
Lower Time	3.2 seconds
Main Relief	3400 psi
Pump Flow Capacity	16 gpm (60 lpm)
Pump Type	Gear
Raise Time	4.5 seconds
Relief Valve Setting	3400 psi

Operating Specifications

Alternator Supplied Amperage	90 amps
Articulation	40 degrees
Breakout Force	13,710 lbs (6,219 kg)
Cooling System Fluid Capacity	6 gal (22 l)
Dump Height at Full Lift	10 ft (3 m)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	21 gal (79 l)
Full Turn Static Tipping Load - Bucket	8,270 lbs (3,751 kg)
Full Turn Static Tipping Load - Forks	6860 lb
Hydraulic Lift Capacity	9,900 lbs (4,491 kg)
Hydraulic System Fluid Capacity	17 gal (64 l)
Operating Voltage	12 volts
Operating Weight	13,288 lbs (6,027 kg)
Oscillation +/-	11 degrees
Rack Back - Transport Position	56 degrees
Rated Bucket Capacity	1 cu yd (1 cu m)
Rated Operating Load at Full Turn - Bucket	4,136 lbs (1,876 kg)
Rated Operating Load at Full Turn - Forks	5291 lb
Reach - Without Teeth	3 ft (1 m)
Rear Axle Oscillation	22 degrees
Static Tipping Weight	9,636 lbs (4,371 kg)
Straight Tipping Load - Bucket	9,636 lbs (4,371 kg)
Tire Size	12.5-18
Transmission Fluid Capacity	3 gal (10 l)

Power Train, Axles and Brakes

Axle and Final Drives	fixed front axle with limited slip differential and planetary ge
Brake Standards	Brake meets ISO 3450:1996
Maximum Travel Speeds - Forward and Reverse, High	12 mph (19 kph)
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low	4 mph (6 kph)
Service and Parking Brake	Are combined in a single, dry-disc driveline brake
Transmission Type	Closed-loop, two-speed hydrostatic single-path transmission.

Service Refill Capacities

Cooling System	6 gal (22 l)
Engine Oil	3 gal (10 l)
Fuel Tank	21 gal (79 l)
Hydraulic System	17 gal (64 l)

Transmission

Max Speed - Forward	12 mph (19 kph)
Max Speed - Reverse	12 mph (19 kph)
Number of Forward Gears	2
Number of Reverse Gears	2
Transmission Type	Hydrostatic

Weights

Operating Weight

13,288 lbs (6,027 kg)

See all of the Caterpillar 908s we have listed for sale.

A Caterpillar 908 From Cleveland Brothers for $118,000.00 USD

A Caterpillar 908 From Foley Incorporated for $109,500.00 USD

A Caterpillar 908 From Yancey Bros. Co. for $98,800.00 USD

A Caterpillar 908 From Jeff Martin Auctioneers, Inc for Auction Pricing

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon