All Equipment Category Specs ↠ Wheel Loaders ↠ Caterpillar 908H

Caterpillar 908H Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 908H (See all Caterpillar 908H for sale)

Bucket

Bucket Capacities	1-2 cu yd (1-2 cu m)
Bucket Capacity - heaped	1.5 cu yd (1 cu m)
Bucket Width	6.8 ft (2 m)
Dump Clearance at Max Raise	8.4 ft (3 m)

Cab

FOPS	SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471-1994

Dimensions

Ground Clearance	1.2 ft (0 m)
Height - Top of Cab	8.7 ft (3 m)
Hinge Pin - Max Height	11.2 ft (3 m)
Length with Bucket on Ground	18.9 ft (6 m)
Reach at Max Lift and Dump	2.9 ft (1 m)
Wheel Base	7.1 ft (2 m)
Wheelbase	7.2 ft (2 m)
Width Over Tires	6.6 ft (2 m)

Engine

Bore	3.7 in (9 cm)
Displacement	203 cu in (0 cu m)
EEC 80/1269 Rating	80 hp (60 kw)
Engine Model	C3.4
Gross Power	83 hp (62 kw)
ISO 9249 Rating	80 hp (60 kw)
Make	Cat
Model	C3.4
Net Power	79 hp (59 kw)
Power Measured @	2500 rpm
SAE J1349 Rating	79 hp (59 kw)
Stroke	4.7 in (12 cm)

Hydraulic System

Dump Time	2 seconds
Lower Time	4 seconds
Main Relief	3400 psi
Pump Flow Capacity	22 gpm (83 lpm)
Raise Time	5 seconds
Relief Valve Setting	3400 psi

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force	10566 lbs (4,793 kg)
Cooling System Fluid Capacity	6.4 gal (24 l)
Engine Oil Fluid Capacity	2.7 gal (10 l)
Fuel Capacity	20.7 gal (78 l)
Full Turn Static Tipping Load - Bucket	7510 lbs (3,407 kg)
Hydraulic System Fluid Capacity	22.2 gal (84 l)
Operating Voltage	12 volts
Operating Weight	14252.9 lbs (6,465 kg)
Rack Back - Transport Position	52 degrees
Rated Bucket Capacity	1.4 cu yd (1 cu m)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center, Transport 100 mm (4 in) Above Ground)	6592 lbs (2,990 kg)
Static Tipping Weight	10524.9 lbs (4,774 kg)
Straight Tipping Load - Bucket	10522 lbs (4,773 kg)
Tire Size	405/70 R20
Turning Radius	7.5 ft (2 m)

Service Refill Capacities

Cooling System	6.3 gal (24 l)
Engine Oil	2.6 gal (10 l)
Fuel Tank	20.6 gal (78 l)
Hydraulic System	22.2 gal (84 l)

Transmission

Max Speed - Forward	12.5 mph (20 kph)
Max Speed - Reverse	12.5 mph (20 kph)
Number of Forward Gears	2
Number of Reverse Gears	2
Transmission Type	Hydrostatic
Travel Speed 1	4.3 mph (7 kph)
Travel Speed 2	12.4 mph (20 kph)

Weights

Operating Weight	14253 lbs (6,465 kg)
Operational Weight	14253 lbs (6,465 kg)

See all of the Caterpillar 908Hs we have listed for sale.

A 2014 Caterpillar 908H From The Nice Company for $59,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon