All Equipment Category Specs ↠ Wheel Loaders ↠ Caterpillar 993K

Caterpillar 993K Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 993K (See all Caterpillar 993K for sale)

Axles

Front	Fixed
Oscillation Angle	10 degrees
Rear	Trunnion

Bucket

Breakout Force	159,562 lbs (72,376 kg)
Bucket Capacities	31 cu yd (24 cu m)
Bucket Capacity - heaped	17 cu yd (13 cu m)
Bucket Capacity - struck	13 cu yd (10 cu m)
Bucket Width	17 ft (5 m)

Dimensions

Ground Clearance	2 ft (1 m)
Height - Top of Cab	20 ft (6 m)
Hinge Pin - Max Height	23 ft (7 m)
Length with Bucket on Ground	50 ft (15 m)
Reach at Max Lift and Dump	8 ft (2 m)
Wheelbase	19 ft (6 m)
Width Over Tires	17 ft (5 m)

Engine

Displacement	1,959 cu in (32,101 cu cm)
Engine Model	C32 ACERT
Gross Power	1,050 hp (783 kw)
Make	Cat
Number of Cylinders	12

Hydraulic Cycle Times

Dump	1.8 seconds
Lower	3.8 seconds
Lower Float Down	3.1 seconds
Rack Back	2.4 seconds
Raise	9.2 seconds
Total Hydraulic Cycle Time	17.2 seconds

Hydraulic System

Dump Time	2.1 seconds
Lower Time	6.7 seconds
Pump Type	3x fully variable E/H displacement control
Raise Time	9.4 seconds
Relief Valve Setting	4278 psi

Hydraulic System - Lift/Tilt

Cylinders - Lift/Tilt	Double-acting
Lift Cylinder - Bore	11 in (27 cm)
Lift Cylinder - Stroke	66 in (168 cm)
Lift/Tilt System - Circuit	Positive Flow Control
Lift/Tilt System - Pump	Variable Piston
Relief Valve Setting - Lift/Tilt	4200 psi
Tilt Cylinder - Bore	9 in (24 cm)
Tilt Cylinder - Stroke	41 in (104 cm)

Hydraulic System - Steering

Relief Valve Setting - Steering	5000 psi
Steering System - Circuit	Closed
Steering System - Pump	Piston, variable displacement
Total Steering Angle	86 degrees

Operating Specifications

Alternator Supplied Amperage	150 amps
Articulation Angle	43 degrees
Cat Truck Match - High Lift	777, 785
Cooling System Fluid Capacity	84 gal (318 l)
Engine Oil Fluid Capacity	32 gal (121 l)
Front Axle/Diff Fluid Capacity	130 gal (492 l)
Fuel Capacity	545 gal (2,063 l)
Hydraulic System Fluid Capacity	49 gal (185 l)
Operating Voltage	24 volts
Operating Weight	294,670 lbs (133,660 kg)
Rated Payload - High Lift	60,627 lbs (27,500 kg)
Rear Axle/Diff Fluid Capacity	128 gal (484 l)
Static Tipping Weight	186,378 lbs (84,540 kg)
Tire Size	50 / 65R51
Transmission Fluid Capacity	45 gal (170 l)
Turning Radius	36 ft (11 m)

Service Refill Capacities

Cooling System	80 gal (304 l)
Crankcase	32 gal (120 l)
Differential - Final Drives - Front	127 gal (482 l)
Differential - Final Drives - Rear	127 gal (482 l)
Fuel Tank	573 gal (2,170 l)
Hydraulic System - Tank Only	146 gal (553 l)
Hydraulic System Factory Fill	230 gal (871 l)
Transmission	52 gal (197 l)

Transmission

Direct Drive - Forward 1	Lock-up disabled
Direct Drive - Forward 2	8 mph (13 kph)
Direct Drive - Forward 3	14 mph (23 kph)
Direct Drive - Reverse 1	5 mph (8 kph)
Direct Drive - Reverse 2	9 mph (14 kph)
Direct Drive - Reverse 3	16 mph (25 kph)
Forward - 1	4 mph (7 kph)
Forward - 2	7 mph (12 kph)
Forward - 3	13 mph (20 kph)
Max Speed - Forward	14 mph (22 kph)
Max Speed - Reverse	15 mph (24 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Reverse - 1	5 mph (8 kph)
Reverse - 2	8 mph (13 kph)
Reverse - 3	14 mph (22 kph)
Transmission Type	Powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon