Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Front | Fixed front |
Maximum Single-Wheel Rise and Fall | 16.5 in (42 cm) |
Brakes | Full-hyrdaulic actuated, oil-disc |
Breakout Force | 28575 lbs (12,962 kg) |
Bucket Capacities | 3-3 cu yd (2-3 cu m) |
Bucket Capacity - heaped | 2.8 cu yd (2 cu m) |
Bucket Capacity - struck | 2.4 cu yd (2 cu m) |
Maximum Bucket Capacity | 3.3 cu yd (3 cu m) |
Dump Clearance at Max Lift | 8.9 ft (3 m) |
Fork Tine Length | 4 ft (1 m) |
Ground Clearance | 1.4 ft (0 m) |
Height - Top of Cab | 10.9 ft (3 m) |
Height - Top of Hood | 92.9 in (236 cm) |
Hinge Pin Max Height | 13.4 ft (4 m) |
Hook Height at Max Lift - extended | 22 ft (7 m) |
Hook Height at Max Lift - standard | 18.33 ft (6 m) |
Hook Reach at Max Lift - extended | 11.75 ft (4 m) |
Hook Reach at Max Lift - standard | 8 ft (2 m) |
Length w/ Bucket on Ground | 25 ft (8 m) |
Length with out Forks on Ground | 26 ft (8 m) |
Max Lift Height | 11.8 ft (4 m) |
Reach at Max Height and Dump | 4.2 ft (1 m) |
Wheel Base | 10 ft (3 m) |
Wheelbase | 10 ft (3 m) |
Width Over Tires | 8.5 ft (3 m) |
Bore | 4.3 in (11 cm) |
Displacement | 439 cu in (0 cu m) |
Engine Model | Cat 3126 DITA |
Flywheel Power | 160 hp (119 kw) |
Gross Power | 180 hp (134 kw) |
Max Torque | 619 lbs ft |
Net Power | 160 hp (119 kw) |
Net Power - 80/1269/EEC | 160 hp (119 kw) |
Net Power - ISO 9249 | 160 hp (119 kw) |
Net Power - SAE J1349 | 160 hp (119 kw) |
Stroke | 5 in (13 cm) |
Torque Rise | 62% |
Total Torque Rise | 0.69 |
Dump Time | 2 seconds |
Hydraulic Cycle Time - Dump | 2 seconds |
Hydraulic Cycle Time - Lower, Empty, Float Down | 2.9 seconds |
Hydraulic Cycle Time - Raise | 5.8 seconds |
Hydraulic Cycle Time - Total | 10.7 seconds |
Lower Time | 2.9 seconds |
Pump Flow Capacity | 43 gpm (163 lpm) |
Pump Type | piston |
Raise Time | 5.8 seconds |
Relief Valve Setting | 3597 psi |
Steering System - Pump Type | Full hydraulic power steering |
Alternator Supplied Amperage | 80 amps |
Breakout Force | 28020 lbs (12,710 kg) |
Cooling System Fluid Capacity | 11.4 gal (43 l) |
Dump Clearance | 9.2 ft (3 m) |
Engine Oil Capacity | 7.9 gal (30 l) |
Front Diff Fluid Capacity | 6.3 gal (24 l) |
Fuel Capacity | 67.9 gal (257 l) |
Hydraulic System Fluid Capacity | 20.1 gal (76 l) |
Operating Voltage | 24 volts |
Operating Weight | 32156 lbs (14,586 kg) |
Rear Axle Oscillation | 12 degrees |
Rear Diff Fluid Capacity | 7.1 gal (27 l) |
Static Tipping Load - Bucket | 22515 lbs (10,213 kg) |
Static Tipping Load - Forks | 18306 lbs (8,304 kg) |
Static Tipping Load - Full Turn | 16800 lbs (7,620 kg) |
Static Tipping Load - Material Handler | 12136 lbs (5,505 kg) |
Tire Size | 20.5R25 |
Transmission Fluid Capacity | 7.9 gal (30 l) |
Turning Radius | 20.1 ft (6 m) |
Cooling System | 12.7 gal (48 l) |
Crankcase | 5.3 gal (20 l) |
Differential - Final Drives - Front | 6.3 gal (24 l) |
Differential - Final Drives - Rear | 7.1 gal (27 l) |
Fuel Tank - Standard | 67 gal (254 l) |
Hydraulic System - Including Tank | 23.8 gal (90 l) |
Hydraulic Tank | 20.1 gal (76 l) |
Transmission | 7.9 gal (30 l) |
Forward - 1 | 4.7 mph (8 kph) |
Forward - 2 | 8.6 mph (14 kph) |
Forward - 3 | 14.8 mph (24 kph) |
Forward - 4 | 24.3 mph (39 kph) |
Max Speed Forward | 24.1 mph (39 kph) |
Max Speed Reverse | 14.5 mph (23 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Reverse - 1 | 4.7 mph (8 kph) |
Reverse - 2 | 8.6 mph (14 kph) |
Reverse - 3 | 24.3 mph (39 kph) |
Transmission Type | Powershift |
Operating Weight | 28714 lbs (13,025 kg) |