Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Front | Fixed front |
Maximum Single-Wheel Rise and Fall | 17 in (43 cm) |
Brakes | Meets required standards |
Breakout Force | 28,326 lbs (12,848 kg) |
Bucket Capacities | 4 cu yd (3 cu m) |
Bucket Capacity - heaped | 4 cu yd (3 cu m) |
Bucket Capacity - struck | 3 cu yd (2 cu m) |
Maximum Bucket Capacity | 4 cu yd (3 cu m) |
Dump Clearance at Max Lift | 9 ft (3 m) |
Fork Tine Length | 5 ft (2 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 11 ft (3 m) |
Height at Hook Max Reach | 6 ft (2 m) |
Hinge Pin Max Height | 13 ft (4 m) |
Length w/ Bucket on Ground | 25 ft (8 m) |
Length with out Forks on Ground | 27 ft (8 m) |
Max Lift Height | 12 ft (4 m) |
Reach at Max Height and Dump | 4 ft (1 m) |
Wheelbase | 10 ft (3 m) |
Width Over Tires | 9 ft (3 m) |
Bore | 4 in (10 cm) |
Displacement | 403 cu in (6,601 cu cm) |
Engine Model | Cat 6.6 ACERT |
Gross Power | 197 hp (147 kw) |
Gross Power - SAE J1995 | 197 hp (147 kw) |
Max Torque | 620 lbs ft (841 nm) |
Net Power | 178 hp (133 kw) |
Net Power - 80/1269/EEC | 180 hp (134 kw) |
Net Power - ISO 9249 | 180 hp (134 kw) |
Net Power - SAE J1349 | 178 hp (133 kw) |
Peak Torque - 1,400 rpm - Net | 620 lbs ft (841 nm) |
Power Measured @ | 2100 rpm |
Stroke | 5 in (13 cm) |
Torque Measured @ | 1400 rpm |
Total Torque Rise | 0.38 |
Dump Time | 2 seconds |
Hydraulic Cycle Time - Dump | 1.4 seconds |
Hydraulic Cycle Time - Lower, Empty, Float Down | 2.7 seconds |
Hydraulic Cycle Time - Raise | 5.4 seconds |
Hydraulic Cycle Time - Total | 9.5 seconds |
Lower Time | 2.7 seconds |
Pilot System - Pump Output | 78 gpm (295 lpm) |
Pump Flow Capacity | 78 gpm (295 lpm) |
Pump Type | Piston |
Raise Time | 5 seconds |
Relief Valve Setting | 1000 psi |
Steering System - Pump Type | Piston |
Alternator Supplied Amperage | 65 amps |
Breakout Force | 27,576 lbs (12,508 kg) |
Cooling System Fluid Capacity | 10 gal (36 l) |
Engine Oil Capacity | 5 gal (17 l) |
Front Diff Fluid Capacity | 15 gal (57 l) |
Fuel Capacity | 65 gal (247 l) |
Hydraulic System Fluid Capacity | 24 gal (89 l) |
Operating Voltage | 24 volts |
Operating Weight | 35,283 lbs (16,004 kg) |
Rear Axle Oscillation | 12 degrees |
Rear Diff Fluid Capacity | 14 gal (53 l) |
Static Tipping Load - Bucket | 23,918 lbs (10,849 kg) |
Static Tipping Load - Forks | 19,546 lbs (8,866 kg) |
Static Tipping Load - Full Turn | 22,207 lbs (10,073 kg) |
Static Tipping Load - Material Handler | 11,599 lbs (5,261 kg) |
Tire Size | 20.5-R25 |
Transmission Fluid Capacity | 11 gal (43 l) |
Turning Radius | 20 ft (6 m) |
Cooling System | 10 gal (36 l) |
Crankcase | 5 gal (17 l) |
Differential - Final Drives - Front | 15 gal (57 l) |
Differential - Final Drives - Rear | 14 gal (53 l) |
Fuel Tank - Standard | 65 gal (247 l) |
Hydraulic Tank | 24 gal (89 l) |
Transmission | 11 gal (43 l) |
Forward - 1 | 5 mph (8 kph) |
Forward - 2 | 9 mph (15 kph) |
Forward - 3 | 16 mph (25 kph) |
Forward - 4 | 27 mph (43 kph) |
Max Speed Forward | 27 mph (43 kph) |
Max Speed Reverse | 16 mph (26 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Reverse - 1 | 5 mph (8 kph) |
Reverse - 2 | 9 mph (15 kph) |
Reverse - 3 | 16 mph (25 kph) |
Operating Weight | 33,190 lbs (15,055 kg) |