All Equipment Category Specs ↠ Wheel Loaders ↠ JCB 411 HT

JCB 411 HT Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: JCB (See all JCB Equipment for sale)
Model: 411 HT (See all JCB 411 HT for sale)

Bucket

Breakout Force	16,456 lbs (7,464 kg)
Bucket Capacity - heaped	2 cu yd (1 cu m)
Bucket Capacity - struck	1 cu yd (1 cu m)
Bucket Width	7 ft (2 m)
Dump Clearance at Max Raise	8 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Dump Clearance at Max Lift	9 ft (3 m)
Fork Tine Length	4 ft (1 m)
Height - Top of Cab	10 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Hinge Pin Max Height	12 ft (4 m)
Length w/ Bucket on Ground	20 ft (6 m)
Length with Bucket on Ground	21 ft (6 m)
Max Lift Height	11 ft (3 m)
Reach at Max Height and Dump	3 ft (1 m)
Reach at Max Lift and Dump	3 ft (1 m)
Width Over Tires	7 ft (2 m)

Engine

Bore	4 in (10 cm)
Engine Type	4 stroke direct injection
Make	JCB
Max Torque	313 lbs ft (424 nm)
Model	Diesel
Net Power	93 hp (69 kw)
Number of Cylinders	4
Power Measured @	2200 rpm
Stroke	5 in (13 cm)

Hydraulic System

3190.8	220 bar psi
Dump Time	1.1 seconds
Lower Time	3.7 seconds
Pump Type	Double gear pump
Raise Time	5 seconds
Relief Valve Setting	3190 psi
Total cycle	9.8 seconds

Operating Specifications

Articulation Angle	40 degrees
Auxiliary fuel tank	29 gal (111 l)
DEF tank capacity	5 gal (20 l)
Engine Oil Capacity	3 gal (11 l)
Engine Oil Fluid Capacity	3 gal (12 l)
Front Axle/Diff Fluid Capacity	7 gal (25 l)
Front Diff Fluid Capacity	7 gal (25 l)
Operating Voltage	24 volts
Rated Bucket Capacity	2 cu yd (1 cu m)
Rear Axle/Diff Fluid Capacity	7 gal (25 l)
Rear Diff Fluid Capacity	7 gal (25 l)
Static Tipping Load - Bucket	13,574 lbs (6,157 kg)
Static Tipping Load - Forks	9,533 lbs (4,324 kg)
Static Tipping Weight	11,835 lbs (5,368 kg)
Turning Radius	18 ft (5 m)

Transmission

Max Speed - Forward	31 mph (50 kph)
Max Speed - Reverse	24 mph (38 kph)
Max Speed Forward	23 mph (37 kph)
Max Speed Reverse	17 mph (28 kph)
Number of Forward Gears	4
Number of Reverse Gears	3

Weights

Operational Weight

19,153 lbs (8,688 kg)

See all of the JCB 411 HTs we have listed for sale.

A 2023 JCB 411 HT From Stephenson Equipment, Inc. for Call for Price

A 2023 JCB 411 HT From Company Wrench for Call for Price

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon