All Equipment Category Specs ↠ Wheel Loaders ↠ JCB 436HT

JCB 436HT Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: JCB (See all JCB Equipment for sale)
Model: 436HT (See all JCB 436HT for sale)

Bucket

Breakout Force	33,047 lbs (14,990 kg)
Bucket Capacity - heaped	3 cu yd (2 cu m)
Bucket Width	9 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Dump Clearance at Max Lift	10 ft (3 m)
Fork Tine Length	4 ft (1 m)
Ground Clearance	2 ft (0 m)
Hinge Pin - Max Height	12 ft (4 m)
Hinge Pin Max Height	13 ft (4 m)
Length w/ Bucket on Ground	23 ft (7 m)
Length with Bucket on Ground	23 ft (7 m)
Max Lift Height	13 ft (4 m)
Reach at Max Height and Dump	4 ft (1 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	10 ft (3 m)
Width Over Tires	9 ft (3 m)

Engine

Aspiration	Turbocharged
Displacement	360 cu in (5,901 cu cm)
Engine Model	BTAA 5.9C
Gross Power	177 hp (132 kw)
Max Torque	580 lbs ft (786 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1300 rpm

Hydraulic System

Dump Time	1 seconds
Lower Time	3.4 seconds
Pump Type	Twin variable displacement piston pumps
Raise Time	5.9 seconds
Relief Valve Setting	3625 psi

Operating Specifications

Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	9 gal (35 l)
Engine Oil Capacity	4 gal (14 l)
Engine Oil Fluid Capacity	4 gal (14 l)
Front Axle/Diff Fluid Capacity	10 gal (39 l)
Front Diff Fluid Capacity	10 gal (39 l)
Fuel Capacity	61 gal (230 l)
Hydraulic System Fluid Capacity	56 gal (210 l)
Operating Voltage	24 volts
Rear Axle Oscillation	21 degrees
Rear Axle/Diff Fluid Capacity	10 gal (39 l)
Rear Diff Fluid Capacity	10 gal (39 l)
Static Tipping Load - Bucket	26,780 lbs (12,147 kg)
Static Tipping Load - Forks	16,907 lbs (7,669 kg)
Static Tipping Weight	22,573 lbs (10,239 kg)
Turning Radius	19 ft (6 m)

Transmission

Max Speed - Forward	24 mph (39 kph)
Max Speed - Reverse	17 mph (27 kph)
Max Speed Forward	24 mph (38 kph)
Max Speed Reverse	17 mph (27 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	Smooth shift powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon