All Equipment Category Specs ↠ Wheel Loaders ↠ Komatsu W90-3

Komatsu W90-3 Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Komatsu (See all Komatsu Equipment for sale)
Model: W90-3 (See all Komatsu W90-3 for sale)

Bucket

Breakout Force	26,230 lbs (11,898 kg)
Bucket Capacity - heaped	3 cu yd (2 cu m)
Bucket Width	9 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Ground Clearance	2 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length with Bucket on Ground	23 ft (7 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	10 ft (3 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	turbocharged
Displacement	396 cu in (6,489 cu cm)
Engine Model	S6D105
Gross Power	157 hp (117 kw)

Hydraulic System

Dump Time	2.5 seconds
Lower Time	2.5 seconds
Raise Time	5.3 seconds

Operating Specifications

Cooling System Fluid Capacity	10 gal (38 l)
Fuel Capacity	60 gal (226 l)
Operating Weight	27,117 lbs (12,300 kg)
Rear Axle Oscillation	24 degrees
Static Tipping Weight	21,385 lbs (9,700 kg)
Tire Size	20.5-25-12PR (L-3)
Turning Radius	21 ft (6 m)

Transmission

Max Speed - Forward	19 mph (30 kph)
Max Speed - Reverse	20 mph (32 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Transmission Type	TORQFLOW full power shift coutnershaft type full soft shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon