All Equipment Category Specs ↠ Wheel Loaders ↠ Komatsu WA180-3

Komatsu WA180-3 Wheel Loader

Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Komatsu (See all Komatsu Equipment for sale)
Model: WA180-3 (See all Komatsu WA180-3 for sale)

Bucket

Breakout Force	20,952 lbs (9,504 kg)
Bucket Capacity - heaped	2 cu yd (2 cu m)
Bucket Width	8 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length with Bucket on Ground	22 ft (7 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	9 ft (3 m)
Width Over Tires	8 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	360 cu in (5,901 cu cm)
Engine Model	S6D102 E1
Gross Power	110 hp (82 kw)
Number of Cylinders	6
Power Measured @	2400 rpm

Hydraulic System

Dump Time	1.1 seconds
Lower Time	2.5 seconds
Pump Flow Capacity	38 gpm (144 lpm)
Raise Time	5 seconds
Relief Valve Setting	3045.8 psi

Operating Specifications

Alternator Supplied Amperage	35 amps
Fuel Capacity	45 gal (170 l)
Operating Voltage	24 volts
Operating Weight	20,569 lbs (9,330 kg)
Rear Axle Oscillation	24 degrees
Static Tipping Weight	17,483 lbs (7,930 kg)
Tire Size	17.5 R25
Turning Radius	18 ft (5 m)

Transmission

Max Speed - Forward	22 mph (35 kph)
Max Speed - Reverse	22 mph (35 kph)
Number of Forward Gears	4
Number of Reverse Gears	4
Transmission Type	Fully automatic, full powershift with 'kick-down' system

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon