General Equipment Co.’s 190C CUT-R-TACH rotary asphalt cutting attachment is specifically designed as a heavy-duty, high production solution to a wide range of asphalt cutting projects.

The 190C clamps directly to the buckets of tractor loader backhoes and wheel/track type loaders without special tools, modifications or adapters. Its twin screw clamping mechanism guarantees a tight fit in both forward and reverse cutting directions.

A 19-in. (48 cm) diameter cutting blade is machined from a special service duty, alloy steel and yields a maximum asphalt cutting depth of 5.5 in. (14 cm). With a blade life in excess of 25,000 lineal ft. (7,620 lineal m), it is field replaceable without disturbing bearings or seals.

The CUT-R-TACH unit features welded steel plate construction that is reinforced at critical stress areas. It is capable of cutting up to 6,000 lineal ft. (1,829 lineal m) per hour in high density asphalt and is an alternative to conventional sawing and jackhammering methods.

For more information, call 800/533-0524 or visit www.generalequip.com.

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Muddy Water Dredging Christens Marlin Class Dredge

Indiana Officials Mark Start of 2024 Construction Season, Promote Safety

Leica Geosystems Launches its First Machine Smart Antenna — Leica iCON gps 120