Atlas Copco Releases New Line of Bucket Crushers

AC's silent demolition tool range of hydraulic attachments just got bigger with a new addition.

Fri July 19, 2013 - National Edition
Construction Equipment Guide

Atlas Copco’s BC 3500 bucket crusher is one of four new bucket crushers added to Atlas Copco’s silent demolition tool line.
Atlas Copco’s BC 3500 bucket crusher is one of four new bucket crushers added to Atlas Copco’s silent demolition tool line.

Atlas Copco has added a line of bucket crushers to its silent demolition tool range of hydraulic attachments. Rig-mounted bucket crushers solve job site waste management issues by recycling asphalt, stone and concrete debris as well as mine, quarry and trench material. The recycled material may be reused on site or sold to third parties. The new line became available July 1.

In addition to the environmental benefits of recycling, Atlas Copco BC-model hydraulic bucket crushers reduce the overall cost of a job by reducing the amount of equipment needed on site and saving on transportation and dump site expenses. They are designed for use at all construction, demo or trenching work sites and are even effective in tight workspaces.

The four new Atlas Copco bucket crushers were engineered with a wide aperture bucket and large capacity. The output size easily adjusts from 0.5 to 4.75 in. (1.3 to 12 cm) or from 0.5 to 4 in. (1.3 to 10 cm) in the BC 1500. The bucket jaws, which receive the most wear, can be inverted. The top and bottom jaws can be replaced or single jaws can be rotated by 180 degrees to provide for more even wear and longer service life. With just two grease points, they require a relatively low level of maintenance; Atlas Copco specifies a 30-hour greasing interval.

“Like all our hydraulic attachments, the new bucket crushers are designed to deliver our customers a lower total cost of ownership,” said Keith Becker, product development specialist of Atlas Copco hydraulic attachments. “The total cost of ownership is the sum of all costs generated by a piece of equipment throughout its lifetime, where the upfront investment only represents a minor portion of the total cost. Our approach assures our customers of a more profitable business over time.”

The models range in weight from 3,307 to 10,803 lbs. (1,500 to 4,900 kg) and may be used on carrier classes from 26,455 to 132,277 lbs. (12,000 to 60,000 kg).

For more information, visit

Today's top stories

Focusing On Hazard Communication Standards

Scarsella Brothers Fix 'Astronomical' Flood Issue on SR 112

Doosan Bobcat Continues Expansion With Groundbreaking of $70M Manufacturing Campus in North Carolina

Clark Construction 'Tops Out' Aztec Stadium

Fahey Sales Acquired by Jeff Martin Auctioneers

Simon A. Meester Named President of Genie

Modernization of Rome, Ga.'s Armuchee High School Slated for 2022 Finish

SEAA Names Pete Gum New Executive Director


ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo