Create a CEG Account  /  CEG Login


Genie Z-40/23N Aerial Lift Specs

The Genie Z-40/23N is a compact electric articulating boom lift in the aerial lifts category, designed for indoor and outdoor access in confined work areas. It features a narrow chassis, zero tail swing, and non-marking tires for maneuverability on finished surfaces. The Z-40/23N provides a working height of approximately 46 ft and a horizontal outreach of about 22 ft, making it suitable for maintenance, installation, and facility work. Its electric drive system supports low-noise operation and reduced emissions. The model is commonly used in warehouses, commercial buildings, and industrial environments where precise up-and-over positioning is required.


Dimensions

Genie Z-40/23N Aerial Lift Dimensions specifications
Ground Clearance 7.09 in (18.01 cm)
Height 6.50 ft (1.98 m)
Length 21.42 ft (6.53 m)
Overall Height - Mast Lowered 6.50 ft (1.98 m)
Overall Length 21.43 in (54.43 cm)
Overall Width 4.93 ft (1.50 m)
Turning Radius 10.50 ft (3.20 m)
Weight 15,230.00 lbs (6,908.22 kg)
Wheelbase 6.44 ft (1.96 m)
Width 4.92 ft (1.50 m)

Engine

Genie Z-40/23N Aerial Lift Engine specifications
Battery Amp Hours 315
Engine Make 0
Number Of Batteries 8
System Voltage 48 V

Operational

Genie Z-40/23N Aerial Lift Operational specifications
Hydraulic System Fluid Capacity 8.00 gal (30.28 l)
Max Speed 4.50 mph (7.24 kph)
Operating Weight 15,229.60 lbs (6,908.04 kg)
Tire Fill/Type Solid, non-marking
Tire Size front: 22x7x17.75, rear: 25.6x7

Platform

Genie Z-40/23N Aerial Lift Platform specifications
Max Horizontal Reach 22.68 ft (6.91 m)
Max Platform Height 40.42 ft (12.32 m)
Max Platform Weight Capacity 500.45 lbs (227.00 kg)
Max Working Height 46.99 ft (14.32 m)
Platform Inner Length 55.91 in (142.01 cm)
Platform Inner Width 29.93 in (76.02 cm)
Platform Rotation 180 degrees
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.