| Auger Diameter |
16.00 in (406.00 mm) - Starting 1998
|
| Dimensions - 10 ft Screed |
120.00 in (3,048.00 mm) - Starting 1998
|
| Displacement |
403.00 cu in (6.60 L) - Starting 1998
|
| Engine Model |
3116TA - Starting 1998
|
| Flywheel Power |
195.00 hp (145.00 kW) - Starting 1998
|
| Height (less exhaust) |
101.00 in (2,565.00 mm) - Starting 1998
|
| Hopper Capacity |
206.00 cu ft (5.80 cu m) - Starting 1998
|
| Length (Extend-A-Mat B Screed, pushroller) |
256.00 in (6,505.00 mm) - Starting 1998
|
| Maximum theoretical capacity |
2936 (t)/hr 2890 TPH - Starting 1998
|
| No. Cylinders |
6 - Starting 1998
|
| Operating Weight - 10 ft |
7,200.00 lbs (3,266.00 kg) - Starting 1998
|
| Operating Weight - Extend-A-Mat B - (wide plates) 10 ft |
8,300.00 lbs (3,760.00 kg) - Starting 1998
|
| Operating Weight - Tractor |
33,375.00 lbs (15,119.00 kg) - Starting 1998
|
| Paving Widths - 10 ft Extend-A-Mat B Screed - Maximum w/extensions |
290.00 in (7,366.00 mm) - Starting 1998
|
| Paving Widths - 10 ft Extend-A-Mat B Screed - Minimum w/cutoff shoes |
96.00 in (2,438.00 mm) - Starting 1998
|
| Paving Widths - 10 ft Pavemaster B Screed - Maximum w/extensions |
384.00 in (9,754.00 mm) - Starting 1998
|
| Paving Widths - 10 ft Pavemaster B Screed - Minimum w/cutoff shoes |
96.00 in (2,438.00 mm) - Starting 1998
|
| Rated Engine RPM |
2200 rpm - Starting 1998
|
| Service Refill Capacities - Cooling system |
9.20 US gal (34.80 L) - Starting 1998
|
| Service Refill Capacities - Fuel tank |
80.00 US gal (303.00 L) - Starting 1998
|
| Speeds: Paving |
0.00-164.00 ft/min (0.00-50.00 m/min) |
| Speeds: Travel |
0.00-5.50 mph (0.00-8.40 km/h) |
| Track Assemblies - Length on ground |
128.00 in (3,251.00 mm) - Starting 1998
|
| Track Assemblies - Total Number of Track Pads |
94 - Starting 1998
|
| Track Assemblies - Width |
18.00 in (457.00 mm) - Starting 1998
|