Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Case 590 Super N is a backhoe loader designed for construction, utility, and site development work. It combines a front loader bucket with a rear backhoe attachment for digging, trenching, loading, and material handling in one machine. The 590 Super N is part of Case Construction Equipment's backhoe loader lineup and is commonly used on job sites that require versatility and maneuverability. Typical applications include excavation, landscaping, road maintenance, and utility installation. The model is known for its compact design, operator visibility, and compatibility with a range of attachments for multi-purpose operation.
| Backhoe Loading Height ft. (m) | 15.8 (4.8) Starting 2024 Model Year |
| Loader Breakout Force lbs. (kg) | 12,776 (5,683) Starting 2024 Model Year |
| Loader Lift Capacity lbs. (kg) | 8,202 (3,721) Starting 2024 Model Year |
| Loader SAE hp (kW) | 110 (82) Starting 2024 Model Year |
| Max Digging Depth ft. (m) | 19.5 (5.9) Starting 2024 Model Year |
| Operating Weight lbs (kg) | 21,325 (9,673) Starting 2024 Model Year |
| Travel Speed 4th Gear Fwd mph (kmh) | 25.0 (40.2) Starting 2024 Model Year |
| Travel Speed 4th Gear Fwd MPH (kmh) | 25.2 (40.6) Starting 2019 Model Year |
| Dig Depth - Extended | 19.50 ft (5.94 m) |
| Load Height - Extended | 15.80 ft (4.82 m) |
| Reach at Load Height - Extended | 8.20 ft (2.50 m) |
| Reach From Swivel | 19.70 ft (6.00 m) |
| Reach From Swivel - Extended | 23.60 ft (7.19 m) |
| Service brake | Wet Multi Disc |
| Cooling system | 4.80 gal (18.17 l) |
| Engine oil with filter | 2.20 gal (8.33 l) |
| Front axle | 524.90 cu in (8,601.59 cu cm) |
| Fuel Tank | 34.90 gal (132.10 l) |
| Rear Axle | 3.60 gal (13.63 l) |
| Ground Clearance | 1.20 ft (0.37 m) |
| Height to Top of Suspended Cab | 8.90 ft (2.71 m) |
| Transport Length | 23.80 ft (7.25 m) |
| Transport Width | 7.80 ft (2.38 m) |
| Wheelbase | 7.00 ft (2.13 m) |
| Aspiration | Turbocharged |
| Bore | 3.90 in (9.91 cm) |
| Displacement | 207.50 cu in (3,400.32 cu cm) |
| Emissions Certification | Tier 4 Final |
| Engine Make | CASE |
| Engine Model | FPT F5BFL413A |
| Gross Power | 110.00 hp (82.03 kw) |
| Net Max Torque | 339.00 lbs ft (459.62 nm) |
| Net Power | 108.00 hp (80.54 kw) |
| Net Torque Rise | 0.45 |
| Number of Cylinders | 4 |
| Power Measured @ | 2200 rpm |
| Stroke | 4.40 in (11.18 cm) |
| Torque Measured @ | 1400 rpm |
| Pump Flow Capacity | 43.00 gpm (162.76 lpm) |
| Pump Type | Variable Displacement Axial Piston |
| Relief Valve Pressure | 3450 psi |
| Bucket Breakout Force | 11,463.00 lbs (5,199.54 kg) |
| Bucket Capacity | 1.30 cu yd (0.99 cu m) |
| Bucket Width | 93.00 in (236.22 cm) |
| Clearance at Max Dump Height | 9.00 ft (2.74 m) |
| Dig Depth | 6.20 in (15.75 cm) |
| Lift Capacity | 8,202.00 lbs (3,720.37 kg) |
| Reach at Max Dump Height | 2.50 ft (0.76 m) |
| Alternator Supplied Amperage | 120 amps |
| Backhoe Flow- gallons | 43.00 gpm (162.76 lpm) |
| Cooling System Fluid Capacity | 4.80 gal (18.17 l) |
| Front Axle Fluid Capacity | 2.30 gal (8.71 l) |
| Fuel Capacity | 42.10 gal (159.35 l) |
| Hydraulic System Fluid Capacity | 34.90 gal (132.10 l) |
| Oil System Fluid Capacity | 3.60 gal (13.63 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 20,458.00 lbs (9,279.60 kg) |
| Operating Weight 4wd | 20,458.00 lbs (9,279.60 kg) |
| Rear Axle Fluid Capacity | 3.60 gal (13.63 l) |
| Tire Size Front - 2wd / 4wd | 14x17.5 |
| Transmission Fluid Capacity | 5.20 gal (19.68 l) |
| Turning Radius | 12.50 ft (3.81 m) |
| Dipper stick Lift Capacity | 6,651.40 lbs (3,017.03 kg) |
| Front Tires Size | 14.0L x 17.5 (4WD) |
| Max Speed | 24.20 mph (38.95 kph) |
| Max Speed - Reverse | 15.90 mph (25.59 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | Powershift |