Category : Backhoe Loaders ➔ Manufacturer : Caterpillar ➔ Model : 428C ➔
The Caterpillar 428C is a backhoe loader designed for digging, loading, trenching, and material handling on construction, utility, and agricultural sites. It combines a front loader bucket with a rear excavator arm, providing versatility in a single machine. The 428C is part of Caterpillar's backhoe loader range and is commonly used for earthmoving, site preparation, road maintenance, and general contractor work. Typical features include a diesel engine, four-wheel drive on many configurations, and hydraulic controls for loader and backhoe functions. The model is recognized for balanced performance, maneuverability, and multi-purpose jobsite capability.
Backhoe
Caterpillar 428C Backhoe Loader Backhoe specifications
Dig Depth - Ext
19.17 ft (5.84 m)
Dig Depth - Std
15.64 ft (4.77 m)
Load Height - Ext
14.62 ft (4.46 m)
Load Height - Std
12.48 ft (3.80 m)
Reach At Load Height - Ext
8.47 ft (2.58 m)
Reach At Load Height - Std
5.38 ft (1.64 m)
Reach From Swivel - Ext
21.74 ft (6.63 m)
Reach From Swivel - Std
18.31 ft (5.58 m)
Dimensions
Caterpillar 428C Backhoe Loader Dimensions specifications
Ground Clearance
1.05 ft (0.32 m)
Height To Top Of Suspended Cab
9.52 ft (2.90 m)
Transport Height
12.28 ft (3.74 m)
Transport Length
18.90 ft (5.76 m)
Transport Width
7.87 ft (2.40 m)
Wheelbase
6.89 ft (2.10 m)
Engine
Caterpillar 428C Backhoe Loader Engine specifications
Aspiration
Natural
Displacement
244.10 cu in (4,000.09 cu cm)
Engine Make
2236
Engine Model
3054
Gross Power
75.00 hp (55.93 kw)
Net Power
78.00 hp (58.17 kw)
Net Torque Rise
15.2 %
Number Of Cylinders
4
Power Measured @
2200 rpm
Hydraulic
Caterpillar 428C Backhoe Loader Hydraulic specifications
Pump Flow Capacity
43.10 gpm (163.13 lpm)
Pump Type
Piston
Relief Valve Pressure
3002.3 psi
Loader
Caterpillar 428C Backhoe Loader Loader specifications
Bucket Capacity
1.31 cu yd
Bucket Width
94.34 in (239.62 cm)
Clearance At Max Dump Height
8.44 ft (2.57 m)
Dig Depth
5.32 in (13.51 cm)
Reach At Max Dump Height
2.70 ft (0.82 m)
Operational
Caterpillar 428C Backhoe Loader Operational specifications
Alternator Supplied Amperage
52 amps
Cooling System Fluid Capacity
5.00 gal (18.93 l)
Fuel Capacity
33.90 gal (128.31 l)
Hydraulic System Fluid Capacity
20.90 gal (79.11 l)
Max Weight
21,384.90 lbs (9,700.04 kg)
Oil System Fluid Capacity
2.00 gal (7.57 l)
Operating Voltage
12 V
Operating Weight 2wd
13,889.20 lbs (6,300.04 kg)
Rear Axle Fluid Capacity
6.40 gal (24.22 l)
Rear Tires Size 2wd/4wd
16.9 x 28
Tire Size Front - 2wd / 4wd
11 x 16 / 10.5 x 20
Transmission Fluid Capacity
4.00 gal (15.14 l)
Turning Radius
26.60 ft (8.11 m)
Transmission
Caterpillar 428C Backhoe Loader Transmission specifications
Max Speed - Forward
19.80 mph (31.86 kph)
Max Speed Reverse
19.80 mph (31.86 kph)
Number Of Forward Gears
4
Number Of Reverse Gears
4
Transmission Type
Power Shuttle
