Category : Backhoe Loaders ➔ Manufacturer : JCB ➔ Model : 3CX-15 ➔
The JCB 3CX-15 is a backhoe loader designed for digging, loading, trenching, and general construction work. It combines a front loader bucket with a rear excavator arm, making it suitable for site preparation, utility installation, landscaping, and material handling. The 3CX-15 is part of JCB's backhoe loader range and is commonly used in municipal, agricultural, and contractor applications. Typical features include four-wheel drive, a hydrostatic or powershift transmission depending on configuration, and a cab designed for operator visibility and control. The model designation identifies a specific JCB 3CX variant within the company's backhoe loader lineup.
General Specifications
JCB 3CX-15 Backhoe Loader General Specifications specifications
4th Gear Fwd
22.50 mph (36.21 kph) - Starting 2008
BREAKOUT FORCE
14,498.00 lbs (6,576.19 kg) - Starting 2010
DIGGING DEPTH
20.08 ft (6.12 m) - Starting 2010
LIFT CAPACITY
10,255.00 lbs (4,651.60 kg) - Starting 2010
Loading Height
15.30 ft (4.66 m) - Starting 2008
Operating Weight
17,037.00 lbs (7,727.86 kg) - Starting 2008
SAE
100.00 hp (74.57 kw) - Starting 2010
SAE Net
98.00 hp (73.08 kw) - Starting 2008
WEIGHT
17,683.00 lbs (8,020.88 kg) - Starting 2010
Backhoe
JCB 3CX-15 Backhoe Loader Backhoe specifications
Bucket Dig Force - Ext
5,538.00 lbs (2,512.00 kg)
Bucket Dig Force - Std
5,538.00 lbs (2,512.00 kg)
Dig Depth - Ext
20.08 ft (6.12 m)
Dig Depth - Std
16.25 ft (4.95 m)
Load At Max Lift - Ext
2,800.00 lbs (1,270.06 kg)
Load At Max Lift - Std
4,860.00 lbs (2,204.46 kg)
Load Height - Ext
15.26 ft (4.65 m)
Load Height - Std
13.00 ft (3.96 m)
Reach At Load Height - Ext
10.18 ft (3.10 m)
Reach At Load Height - Std
6.50 ft (1.98 m)
Reach From Swivel - Ext
23.00 ft (7.01 m)
Reach From Swivel - Std
19.43 ft (5.92 m)
Dimensions
JCB 3CX-15 Backhoe Loader Dimensions specifications
Ground Clearance
1.09 ft (0.33 m)
Height To Top Of Suspended Cab
9.42 ft (2.87 m)
Transport Height
12.77 ft (3.89 m)
Transport Length
24.58 ft (7.49 m)
Transport Width
7.71 ft (2.35 m)
Wheelbase
7.42 ft (2.26 m)
Engine
JCB 3CX-15 Backhoe Loader Engine specifications
Aspiration
Turbo
Displacement
268.60 cu in (4,401.58 cu cm)
Engine Make
2257
Engine Model
444
Gross Power
100.00 hp (74.57 kw)
Net Max Torque
307.60 lbs ft (417.04 nm)
Net Power
97.60 hp (72.78 kw)
Number Of Cylinders
4
Power Measured @
2200 rpm
Torque Measured @
1300 rpm
Hydraulic
JCB 3CX-15 Backhoe Loader Hydraulic specifications
Pump Flow Capacity
39.10 gpm (147.99 lpm)
Pump Type
dual gear pumps
Relief Valve Pressure
3300 psi
Loader
JCB 3CX-15 Backhoe Loader Loader specifications
Bucket Breakout Force
12,638.00 lbs (5,732.51 kg)
Bucket Capacity
1.4 cu yd
Bucket Width
92.50 in (234.95 cm)
Clearance At Max Dump Height
8.99 ft (2.74 m)
Dig Depth
1.97 in (5.00 cm)
Lift Capacity At Full Height
9,231.00 lbs (4,187.12 kg)
Reach At Max Dump Height
2.66 ft (0.81 m)
Operational
JCB 3CX-15 Backhoe Loader Operational specifications
Alternator Supplied Amperage
95 amps
Cooling System Fluid Capacity
6.10 gal (23.09 l)
Front Axle Fluid Capacity
4.30 gal (16.28 l)
Fuel Capacity
42.30 gal (160.11 l)
Hydraulic System Fluid Capacity
33.60 gal (127.18 l)
Max Weight
18,223.00 lbs (8,265.82 kg)
Oil System Fluid Capacity
4.00 gal (15.14 l)
Operating Voltage
12 V
Operating Weight 2wd
17,037.00 lbs (7,727.86 kg)
Rear Axle Fluid Capacity
4.30 gal (16.28 l)
Rear Tires Size 2wd/4wd
19.5L-24 R4 10 PLY
Tire Size Front - 2wd / 4wd
14-17.5 fwd 12 PLY
Transmission Fluid Capacity
4.30 gal (16.28 l)
Turning Radius
13.80 ft (4.21 m)
Transmission
JCB 3CX-15 Backhoe Loader Transmission specifications
Max Speed - Forward
21.30 mph (34.28 kph)
Max Speed Reverse
21.30 mph (34.28 kph)
Number Of Forward Gears
4
Number Of Reverse Gears
4
Transmission Type
JCB powershift
