Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Bucket Dig Force | 9,650.00 lbs (4,377.17 kg) |
| Bucket Dig Force - Extended | 9,650.00 lbs (4,377.17 kg) |
| Dig Depth | 15.40 ft (4.69 m) |
| Dig Depth - Extended | 14.20 ft (4.33 m) |
| Load Height - Extended | 11.60 ft (3.54 m) |
| Reach at Load Height - Extended | 22.00 ft (6.71 m) |
| Reach From Swivel | 18.70 ft (5.70 m) |
| Reach From Swivel - Extended | 18.70 ft (5.70 m) |
| Height to Top of Suspended Cab | 8.50 ft (2.59 m) |
| Transport Length | 23.80 ft (7.25 m) |
| Transport Width | 10.20 ft (3.11 m) |
| Displacement | 219.00 cu in (3,588.77 cu cm) |
| Engine Model | 300 Series |
| Gross Power | 66.00 hp (49.22 kw) |
| Net Max Torque | 160.00 lbs ft (216.93 nm) |
| Net Power | 62.00 hp (46.23 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2500 rpm |
| Torque Measured @ | 1300 rpm |
| Pump Flow Capacity | 38.00 gpm (143.83 lpm) |
| Pump Type | Piston constant pressure variable displacement |
| Relief Valve Pressure | 2350 psi |
| Bucket Breakout Force | 7,500.00 lbs (3,401.95 kg) |
| Bucket Capacity | 1.30 cu yd (0.99 cu m) |
| Bucket Width | 89.40 in (227.08 cm) |
| Clearance at Max Dump Height | 10.80 ft (3.29 m) |
| Dig Depth | 4.00 in (10.16 cm) |
| Reach at Max Dump Height | 2.80 ft (0.85 m) |
| Alternator Supplied Amperage | 35 amps |
| Cooling System Fluid Capacity | 3.30 gal (12.49 l) |
| Fuel Capacity | 3.50 gal (13.25 l) |
| Hydraulic System Fluid Capacity | 20.50 gal (77.59 l) |
| Oil System Fluid Capacity | 2.30 gal (8.71 l) |
| Operating Voltage | 12 volts |
| Tire Size Front - 2wd / 4wd | 11L-1610ply ratingF3/7.50/8.00-1610ply ratingF3 |
| Transmission Fluid Capacity | 10.00 gal (37.85 l) |
| Turning Radius | 10.20 ft (3.11 m) |
| Rear Tires Size | 16.9-248ply ratingR4/19.5L-24 8ply ratingR4 |
| Max Speed | 16.40 mph (26.39 kph) |
| Max Speed - Reverse | 18.70 mph (30.09 kph) |
| Number of Forward Gears | 8 |
| Number of Reverse Gears | 8 |
| Transmission Type | Constant mesh 8-speed forward and reverse.Standard hydraulic direction reverser permits no clutch reversing in all gears |