John Deere V452M Baler Specs

Category: Balers ➔
Manufacturer: John Deere ➔
Model: V452M ➔

Additional Information

John Deere V452M Baler Additional Information specifications
Date Collected	2025-08-13 - Starting 2026

Axles, Brakes, and Tires

John Deere V452M Baler Axles, Brakes, and Tires specifications
Axle Type	Straight axle (6 wheel nuts) - Starting 2026
Brakes System	Standard - No brakes \| Option - With brakes - Starting 2026
Conventional Tire Options	500/50-17 or 500/55-20 - Starting 2026
Radial Tire Options	620/40R22,5 - Starting 2026
Standard Tires	15/55-17 - Starting 2026

Bale Chamber

John Deere V452M Baler Bale Chamber specifications
Bale Chamber Width	47.64 in (121.01 cm) - Starting 2026
Bale Diameter	39.37 - 64.96 in. - Starting 2026
Bale Formation	3 starter rolls + 6 endless belts - Starting 2026
Density Control	Control from the display - Starting 2026
Density System	Hydraulic - hydraulic cylinders - Starting 2026
Diameter Control	Control from the display - Starting 2026
Gate Lockout	Mechanical - Starting 2026
Maximum Bale Chamber Volume	91.46 cu ft - Starting 2026
Number of Belt Driving Rolls	Standard - RotoFlow HC : 1 / MaxiCut™ HC : 2 \| Option - RotoFlow : 1 additional belt drive roll - Starting 2026
Softcore Control	Control from the display - Starting 2026

Binding System

John Deere V452M Baler Binding System specifications
Binding Material Storage	Net : 1 + 1 / Twine : 2 x 4 - Starting 2026
Binding Technology	Standard - Net binding \| Option - Twine tying - Starting 2026
Binding/Tying Control	Control from display - Starting 2026
Binding/Tying Mode	Automatic or Manual - Starting 2026
Binding/Tying System	Net : on tailgate - Direct feed, between rubber and zinc rolls / Twine - 2 independent twine arms - Starting 2026

Control System

John Deere V452M Baler Control System specifications
Automation	Standard - Gate & Speed Automation \| Option - Universal Gate Automation - Starting 2026
Aux-Control	Not available - Starting 2026
Bale Shape Indicators	Standard - Starting 2026
Camera and Lights	Option - Vision Pack (1x camera + 2x service lights) - Starting 2026
Display	Standard - G5e Display \| Option - G5 Universal Display or Less Display - Starting 2026
ISOBUS Compatibility	Standard - Starting 2026

Dimensions & Weights

John Deere V452M Baler Dimensions & Weights specifications
Height	9.81 ft (2.99 m) - Starting 2026
Length	17.62 ft (5.37 m) - Starting 2026
Weight	9,590.00 lbs (4,349.96 kg) - Starting 2026
Width	8.96 ft (2.73 m) - Starting 2026

Key Specs

John Deere V452M Baler Key Specs specifications
Automation	Standard - Gate & Speed Automation \| Option - Universal Gate Automation - Starting 2026
Bale Diameter	39.37 - 64.96 in. - Starting 2026
Bale Formation	3 starter rolls + 6 endless belts - Starting 2026
Binding Technology	Standard - Net binding \| Option - Twine tying - Starting 2026
Dropfloor	Full-width dropfloor - Starting 2026
ISOBUS Compatibility	Standard - Starting 2026
Minimum Tractor Power Requirements	120.00 hp (89.49 kw) - Starting 2026
Pickup Design	Standard - Camless / Option - Cam-track - Starting 2026
Standard Precutter Rotor	Option - MaxiCut™ HC68 (In-Line Rotor - 3 tines per revolution) - Starting 2026
Working Width (DIN 11220)	86.6 (83.46) in. - Starting 2026

Maintenance

John Deere V452M Baler Maintenance specifications
50-Hour Power Take-Off Clutch	Standard - Starting 2026
Automatic Greasing	Option - Tank system - Starting 2026
Manual Greasing	Standard - Starting 2026

Miscellaneous

John Deere V452M Baler Miscellaneous specifications
Bale Ejection	Option - Discharge ramp - Starting 2026
Jackstand	Manual - Double speed - Starting 2026
Moisture Sensor	Option - Starting 2026
Road Lights and Road Signs	Standard - Starting 2026
Tongue Adjustment	Upper and lower position adjustable with toothed discs - Starting 2026
Toolbox	Option - Starting 2026
Wheel Chocks	Option - Starting 2026

Pickup

John Deere V452M Baler Pickup specifications
Number of Tine Bars	Camless - 5 tine bars / 5 mm (0.20 in.) Cam-track - 5 tubular tine bars including central reinforcement / 6 mm (0.24 in.) - Starting 2026
Pickup Design	Standard - Camless / Option - Cam-track - Starting 2026
Pickup Gauge Wheels (Pneumatic)	Standard - Fixed / Option - Caster action - Starting 2026
Pickup Lift	Hydraulic - Starting 2026
Pickup Stripper Material	Camless - Galvanized steel / Cam-track - Stainless steel - Starting 2026
Pickup Tine Spacing	2.60 in (6.60 cm) - Starting 2026
Tines Diameter	0.20 in (0.51 cm) - Starting 2026
Windrow Roll Compressor	Standard - Starting 2026
Working Width (DIN 11220)	86.6 (83.46) in. - Starting 2026

Rotor

John Deere V452M Baler Rotor specifications
Dropfloor	Full-width dropfloor - Starting 2026
Dropfloor Control	Control from the display - Starting 2026
Knife Control	Control from the display - Starting 2026
Knife Storage and Knife Filler Plates	Standard with MaxiCut™ HC - Starting 2026
Knives Protection	Hydraulic protection - Starting 2026
Premium Precutter Rotor	Option - MaxiCut™ HC40 (In-Line Rotor - 3 tines per revolution) - Starting 2026
Premium Precutter Rotor- Knives Group Selection	Yes (0-12-13) - Starting 2026
Premium Precutter Rotor- Maximum Number of Knives	25 - Starting 2026
Premium Precutter Rotor- Theoretical Length of Cut	3.15 in (8.00 cm) - Starting 2026
Standard Feeder Rotor	Standard - RotoFlow HC (In-Line Rotor - 3 tines per revolution) - Starting 2026
Standard Precutter Rotor	Option - MaxiCut™ HC68 (In-Line Rotor - 3 tines per revolution) - Starting 2026
Standard Precutter Rotor- Knives Group Selection	Option - (0-7-8-15) - Starting 2026
Standard Precutter Rotor- Maximum Number of Knives	15 - Starting 2026
Standard Precutter Rotor- Theoretical Length of Cut	2.68 in (6.81 cm) - Starting 2026

Tractor Requirements

John Deere V452M Baler Tractor Requirements specifications
Hydraulic Requirements	2x DE - Starting 2026
Minimum Required Hydraulic Flow	9.25 gpm (35.01 lpm) - Starting 2026
Minimum Tractor Power Requirements	120.00 hp (89.49 kw) - Starting 2026

Transmission and Driveline

John Deere V452M Baler Transmission and Driveline specifications
Chain Lubrication	Automatic - Continuous Lubrication - Starting 2026
Check Tensioner Straps	Standard - Starting 2026
Gearbox	T-Shape gearbox - Starting 2026
Main Drive Protection	Cam-clutch on PTO - Starting 2026
Number of Baler Chains	4 - Starting 2026
Pickup Protection	Integrated on pick-up tines - Starting 2026
Power Take-Off	540 rpm - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon