- Category: Compact Track Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 257B2 ➔
The Caterpillar 257B2 Compact Track Loader is a powerful and versatile machine designed for a wide range of applications. With a robust engine delivering 61 horsepower, a hydraulic system capable of handling heavy loads, and impressive breakout force of 3954 lbs, this track loader is ideal for demanding tasks. Its compact dimensions make it easy to maneuver in tight spaces, while its comfortable cab with FOPS and ROPS certifications ensures operator safety and efficiency. Whether handling materials, grading, or landscaping, the Caterpillar 257B2 delivers reliable performance and agility on any job site.
Cab
| FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I
|
| FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II
|
| ROPS | SAE J1040 MAY94 ISO 3471:1994
|
Dimensions
| Bucket Pin Height - Carry Position | 8.00 in (20.32 cm)
|
| Bucket Pin Height - Maximum Lift | 10.00 ft (3.05 m)
|
| Clearance at Max Lift and Dump | 7.50 ft (2.29 m)
|
| Clearance at Maximum Lift and Dump | 90.00 in (228.60 cm)
|
| Departure Angle | 37 degrees
|
| Height - Top of Cab | 6.70 ft (2.04 m)
|
| Length - Track on Ground | 59.00 in (149.86 cm)
|
| Length - with Bucket | 11.30 ft (3.44 m)
|
| Length - With Bucket on Ground | 135.00 in (342.90 cm)
|
| Maximum Dump Angle | 50 degrees
|
| Maximum Overall Height | 153.00 in (388.62 cm)
|
| Maximum Reach - With Arms Parallel | 53.00 in (134.62 cm)
|
| Overall Length - Track | 75.00 in (190.50 cm)
|
| Rack Back Angle - Maximum Height | 86.9 degrees
|
| Reach at Max Lift and Dump | 2.50 ft (0.76 m)
|
| Reach at Maximum Lift/Dump | 30.00 in (76.20 cm)
|
| Turn Radius from Center - Bucket | 86.00 in (218.44 cm)
|
| Turn Radius from Center - Coupler | 56.00 in (142.24 cm)
|
| Turn Radius from Center - Rear | 57.00 in (144.78 cm)
|
| Turning Radius from Center - inc bucket | 86.30 in (219.20 cm)
|
| Turning Radius from Center - machine rear | 57.20 in (145.29 cm)
|
| Vehicle Width | 66.00 in (167.64 cm)
|
| Width Over Tracks | 5.50 ft (1.68 m)
|
Engine
| Bore | 3.30 in (8.38 cm)
|
| Displacement | 134.00 cu in (2,195.87 cu cm)
|
| Gross Power | 61.00 hp (45.49 kw)
|
| Gross Power - SAE J1995 | 61.00 hp (45.49 kw)
|
Hydraulic System
| Hydraulic Flow (1) | Standard
|
| Hydraulic Power | 30.40 hp (22.67 kw)
|
| Hydraulic Power - Calculated | 60.30 hp (44.97 kw)
|
| Loader Hydraulic Flow | 15.60 gpm (59.05 lpm)
|
| Loader Hydraulic Pressure | 3335 psi
|
| Maximum Loader Hydraulic Flow | 26.00 gpm (98.41 lpm)
|
| Maximum Loader Hydraulic Pressure | 3335 psi
|
| Pump Flow | 15.90 gpm (60.18 lpm)
|
Loader
| Breakout Force | 3,954.00 lbs (1,793.51 kg)
|
| Operating Load | 2,500.00 lbs (1,133.98 kg)
|
Operating Specifications
| Alternator Supplied Amperage | 85 amps
|
| Breakout Force - Tilt Cylinder | 3,954.00 lbs (1,793.51 kg)
|
| Cooling System Fluid Capacity | 2.70 gal (10.22 l)
|
| Engine Oil Capacity | 2.70 gal (10.22 l)
|
| Fuel Capacity | 22.20 gal (84.03 l)
|
| Hydraulic System Fluid Capacity | 14.60 gal (55.26 l)
|
| Max Speed - high range | 7.00 mph (11.27 kph)
|
| Max Speed - low range | 6.90 mph (11.10 kph)
|
| Operating Voltage | 12 volts
|
| Rated Operating Capacities - 35% Tipping Load | 1,870.00 lbs (848.22 kg)
|
| Tipping Load | 5,350.00 lbs (2,426.72 kg)
|
Power Train
| Travel Speed Forward | 6.90 mph (11.10 kph)
|
| Travel Speed Forward - 2-Speed Option | 10.00 mph (16.09 kph)
|
| Travel Speed Reverse | 6.90 mph (11.10 kph)
|
| Travel Speed Reverse - 2-Speed Option | 10.00 mph (16.09 kph)
|
Service Refill Capacities
| Cooling System | 2.60 gal (9.84 l)
|
| Engine Crankcase | 2.40 gal (9.08 l)
|
| Fuel Tank | 22.20 gal (84.03 l)
|
| Hydraulic Tank | 9.20 gal (34.82 l)
|
Undercarriage
| Ground Contact Area | 1,770.00 cu in (29,005.17 cu cm)
|
| Ground Pressure | 4.5 psi
|
| Length of Track on Ground | 5.00 ft (1.52 m)
|
Weights
| Operating Weight | 8,060.00 lbs (3,655.96 kg)
|
