Categories ↠ Compact Track Loaders ↠ Caterpillar 279C2

Caterpillar 279C2 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 279C2 ➔

The Caterpillar 279C2 Compact Track Loader is a powerful and versatile machine designed to handle a wide range of tasks with ease. With a compact design and impressive performance capabilities, this loader offers exceptional maneuverability and efficiency on the job site. From its high breakout force and operating capacities to its reliable hydraulic system and comfortable cab, the 279C2 is a top choice for contractors and operators looking for a dependable and efficient compact track loader.

See all Caterpillar 279C2s for sale

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket hinge pin	123.20 in (312.93 cm)
Bucket Pin Height - Carry Position	7.70 in (19.56 cm)
Bucket Pin Height - Maximum Lift	10.30 ft (3.14 m)
Clearance at Max Lift and Dump	8.00 ft (2.44 m)
Clearance at Maximum Lift and Dump	95.60 in (242.82 cm)
Departure Angle	44 degrees
Dump angle	40 degrees
Ground Clearance	9.10 in (23.11 cm)
Height - Top of Cab	7.00 ft (2.13 m)
Length - Track on Ground	64.00 in (162.56 cm)
Length - with Bucket	12.10 ft (3.69 m)
Length - With Bucket on Ground	144.80 in (367.79 cm)
Maximum Dump Angle	40 degrees
Maximum Overall Height	157.70 in (400.56 cm)
Maximum Reach - With Arms Parallel	54.60 in (138.68 cm)
Overall height	13.20 ft (4.02 m)
Overall Length - Track	83.80 in (212.85 cm)
Overall Track Length	7.00 ft (2.13 m)
Rack Back Angle - Maximum Height	85 degrees
Reach at Max Lift and Dump	2.00 ft (0.61 m)
Reach at Maximum Lift/Dump	23.40 in (59.44 cm)
Turn Radius from Center - Bucket	88.10 in (223.77 cm)
Turn Radius from Center - Coupler	57.40 in (145.80 cm)
Turn Radius from Center - Rear	69.40 in (176.28 cm)
Turning Radius from Center - machine rear	68.00 in (172.72 cm)
Vehicle Width	78.00 in (198.12 cm)
Width Over Tracks	6.50 ft (1.98 m)

Engine

Bore	3.40 in (8.64 cm)
Displacement	201.00 cu in (3,293.81 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C3.4T
Gross Power	73.80 hp (55.03 kw)
Gross Power - SAE J1995	74.00 hp (55.18 kw)
Net Power	73.00 hp (54.44 kw)
Net Power - SAE 1349	73.00 hp (54.44 kw)
Stroke	4.70 in (11.94 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.80 hp (31.92 kw)
Loader Hydraulic Flow	22.00 gpm (83.27 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	33.00 gpm (124.91 lpm)
Maximum Loader Hydraulic Pressure	4061 psi
Pump Flow	22.20 gpm (84.03 lpm)
Pump Type	Standard
Relief Valve Pressure	3335.9 psi

Loader

Breakout Force	7,308.40 lbs (3,315.04 kg)
Operating capacity (ISO 14397)	3,049.00 lbs (1,383.00 kg)
Tipping Load	6,100.20 lbs (2,767.01 kg)

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,308.00 lbs (3,314.86 kg)
Cooling System Fluid Capacity	3.70 gal (14.00 l)
Fuel Capacity	25.90 gal (98.03 l)
Ground Contact Area	2,303.00 cu in (37,739.49 cu cm)
Ground Pressure	4.3 psi
Hydraulic System Fluid Capacity	15.10 gal (57.15 l)
Operating Voltage	12 volts
Operating Weight	9,865.70 lbs (4,475.01 kg)
Rated Operating Capacities - 35% Tipping Load	2,135.00 lbs (968.42 kg)
Rated Operating Capacities - 50% Tipping Load	3,050.00 lbs (1,383.46 kg)
Tipping Load	6,100.00 lbs (2,766.92 kg)
Travel Speed	8.50 mph (13.68 kph)

Power Train

Travel Speed Forward	5.00 mph (8.05 kph)
Travel Speed Forward - 2-Speed	8.50 mph (13.68 kph)
Travel Speed Reverse	5.00 mph (8.05 kph)
Travel Speed Reverse - 2-Speed	8.50 mph (13.68 kph)

Service Refill Capacities

Cooling System	3.70 gal (14.00 l)
Engine Crankcase	2.60 gal (9.84 l)
Fuel Tank	26.00 gal (98.41 l)
Hydraulic System	15.00 gal (56.78 l)
Hydraulic Tank	11.00 gal (41.64 l)

Undercarriage

Counterweight, Standard	125.70 lbs (57.02 kg)
Ground Contact Area	2,309.60 cu in (37,847.65 cu cm)
Ground Pressure	4.3 psi
Length of Track on Ground	5.40 ft (1.65 m)

Weights

Operating Weight

9,865.00 lbs (4,474.69 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon