Caterpillar 285 XE Compact Track Loader Specs

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 285 XE ➔

General Specifications

Caterpillar 285 XE Compact Track Loader General Specifications specifications
Engine Power	121.00 hp (90.23 kw) - Starting 2025
Operating Width	80 / 82 - Starting 2026
Rated Operating Capacity LBS (KG) 50%	4,520 (2050) - Starting 2025

Cab

Caterpillar 285 XE Compact Track Loader Cab specifications
FOPS	ISO 3449:2005 Level I - Starting 2026
FOPS Level II	ISO 3449:2005 Level II (Optional) - Starting 2026
ROPS	ISO 3471:2008 - Starting 2026

Dimensions

Caterpillar 285 XE Compact Track Loader Dimensions specifications
Bucket Pin Height - Carry Position	8.20 in (20.83 cm) - Starting 2026
Bucket Pin Height - Maximum Lift	146.60 in (372.36 cm) - Starting 2026
Bucket Pin Reach - Maximum Lift	16.30 in (41.40 cm) - Starting 2026
Clearance at Maximum Lift and Dump	119.60 in (303.78 cm) - Starting 2026
Departure Angle	26 degrees - Starting 2026
Ground Clearance	11.00 in (27.94 cm) - Starting 2026
Height - Top of Cab	87.80 in (223.01 cm) - Starting 2026
Length - Track on Ground	72.00 in (182.88 cm) - Starting 2026
Length - With Bucket on Ground	157.40 in (399.80 cm) - Starting 2026
Length - Without Bucket	132.30 in (336.04 cm) - Starting 2026
Maximum Dump Angle	40.5 degrees - Starting 2026
Maximum Overall Height	178.00 in (452.12 cm) - Starting 2026
Maximum Reach - With Arms Parallel to Ground	50.60 in (128.52 cm) - Starting 2026
Overall Length - Track	85.80 in (217.93 cm) - Starting 2026
Rack Back Angle - Maximum Height	89 degrees - Starting 2026
Reach at Maximum Lift/Dump	34.70 in (88.14 cm) - Starting 2026
Roll Back Angle	27.2 degrees - Starting 2026
Turning Radius from Center - Bucket (racked)	94.50 in (240.03 cm) - Starting 2026
Turning Radius from Center - Coupler	62.10 in (157.73 cm) - Starting 2026
Turning Radius from Center - Machine Rear	74.30 in (188.72 cm) - Starting 2026
Vehicle Width (450 mm/17.7 in tracks)	81.80 in (207.77 cm) - Starting 2026

Engine

Caterpillar 285 XE Compact Track Loader Engine specifications
Bore	4.70 in (11.94 cm) - Starting 2026
Displacement	220 in² - Starting 2026
Engine Model	Cat???????® C3.6 TA (turbocharged after-cooled) - Starting 2026
Gross Power - SAE J1995:2014	122.00 hp (90.98 kw) - Starting 2026
Net Power - ISO 9249	120.00 hp (89.49 kw) - Starting 2026
Net Power - SAE 1349	121.00 hp (90.23 kw) - Starting 2026
Peak Torque - 1,500 rpm - SAE J1995	406.00 lbs ft (550.45 nm) - Starting 2026
Stroke	3.90 in (9.91 cm) - Starting 2026

Hydraulic System

Caterpillar 285 XE Compact Track Loader Hydraulic System specifications
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	80.70 hp (60.18 kw) - Starting 2026
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	34.00 gpm (128.69 lpm) - Starting 2026
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi - Starting 2026
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	46.40 hp (34.60 kw) - Starting 2026
Hydraulic Flow - Standard - Loader Hydraulic Flow	23.00 gpm (87.06 lpm) - Starting 2026
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3500 psi - Starting 2026
Hydraulic Flow - XE - Hydraulic Power (calculated)	103.90 hp (77.48 kw) - Starting 2026
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*	40.00 gpm (151.40 lpm) - Starting 2026
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure	4496 klb/in² - Starting 2026

Operating Specifications

Caterpillar 285 XE Compact Track Loader Operating Specifications specifications
Breakout Force - Lift Cylinder	8,730.00 lbs (3,959.87 kg) - Starting 2026
Breakout Force - Tilt Cylinder	13,920.00 lbs (6,314.01 kg) - Starting 2026
Ground Contact Area - With 450 mm/17.7 in Track	2724 in² - Starting 2026
Ground Pressure - With 400 mm/15.7 in Track	5.6 psi - Starting 2026
Ground Pressure - With 450 mm/17.7 in Track	5 psi - Starting 2026
Rated Operating Capacities - 35% Tipping Load	4,520.00 lbs (2,050.24 kg) - Starting 2026
Rated Operating Capacities - 50% Tipping Load	6,457.00 lbs (2,928.85 kg) - Starting 2026
Tipping Load	12,915.00 lbs (5,858.15 kg) - Starting 2026

Power Train

Caterpillar 285 XE Compact Track Loader Power Train specifications
Travel Speed - Forward or Reverse - One Speed	4.80 mph (7.72 kph) - Starting 2026
Travel Speed - Forward or Reverse - Two Speed	7.50 mph (12.07 kph) - Starting 2026

Service Refill Capacities

Caterpillar 285 XE Compact Track Loader Service Refill Capacities specifications
Cooling System	4.60 gal (17.41 l) - Starting 2026
Diesel Exhaust Fluid (DEF) Tank	2.90 gal (10.98 l) - Starting 2026
Engine Crankcase	2.40 gal (9.08 l) - Starting 2026
Fuel Tank	36.00 gal (136.26 l) - Starting 2026
Hydraulic System	10.80 gal (40.88 l) - Starting 2026
Hydraulic Tank	6.90 gal (26.12 l) - Starting 2026

Weights*

Caterpillar 285 XE Compact Track Loader Weights* specifications
Counterweight Adds to Operating Weight	428.00 lbs (194.14 kg) - Starting 2026
Counterweight Adds to Operating Weight - ROC (35%)	296.00 lbs (134.26 kg) - Starting 2026
Counterweight Adds to Operating Weight - Tip Load	847.00 lbs (384.19 kg) - Starting 2026
Operating Weight	13,669.00 lbs (6,200.16 kg) - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon