Categories ↠ Compact Track Loaders ↠ Caterpillar 289C

Caterpillar 289C Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 289C ➔

The Caterpillar 289C is a compact track loader designed for material handling, grading, site preparation, and work in soft or uneven ground conditions. It features a tracked undercarriage for improved flotation and traction compared with wheeled loaders, making it suitable for construction, landscaping, agriculture, and utility applications. The 289C is part of Caterpillar's C Series compact track loader line and is commonly used with buckets, forks, augers, and other attachments. Its compact size supports maneuverability in confined job sites while maintaining lifting and digging capability. The model is recognized for versatility, stability, and compatibility with a wide range of work tools.

See all Caterpillar 289Cs for sale

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	7.70 in (19.56 cm)
Bucket Pin Height - Maximum Lift	10.70 ft (3.26 m)
Bucket Pin Reach - Maximum Lift	14.60 in (37.08 cm)
Clearance at Max Lift and Dump	8.10 ft (2.47 m)
Clearance at Maximum Lift and Dump	96.70 in (245.62 cm)
Departure Angle	44 degrees
Ground Clearance	9.10 in (23.11 cm)
Height - Top of Cab	7.00 ft (2.13 m)
Length - Track on Ground	69.60 in (176.78 cm)
Length - with Bucket	12.10 ft (3.69 m)
Length - With Bucket on Ground	144.80 in (367.79 cm)
Maximum Dump Angle	50 degrees
Maximum Overall Height	160.70 in (408.18 cm)
Maximum Reach - With Arms Parallel	50.50 in (128.27 cm)
Overall Length - Track	89.40 in (227.08 cm)
Rack Back Angle - Maximum Height	85 degrees
Reach at Max Lift and Dump	2.60 ft (0.79 m)
Reach at Maximum Lift/Dump	30.70 in (77.98 cm)
Turn Radius from Center - Bucket	91.10 in (231.39 cm)
Turn Radius from Center - Coupler	57.90 in (147.07 cm)
Turn Radius from Center - Rear	64.60 in (164.08 cm)
Turning Radius from Center - inc bucket	91.20 in (231.65 cm)
Turning Radius from Center - machine rear	64.60 in (164.08 cm)
Vehicle Width	78.00 in (198.12 cm)
Width Over Tracks	6.50 ft (1.98 m)

Engine

Aspiration	Turbocharged
Bore	3.70 in (9.40 cm)
Displacement	201.00 cu in (3,293.81 cu cm)
Engine Model	Cat C3.4T
Gross Power	84.00 hp (62.64 kw)
Gross Power - SAE J1995	84.00 hp (62.64 kw)
Net Power	82.00 hp (61.15 kw)
Net Power - SAE 1349	82.00 hp (61.15 kw)
Number of Cylinders	4
Power Measured @	2500 rpm
Stroke	4.70 in (11.94 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.80 hp (31.92 kw)
Loader Hydraulic Flow	22.00 gpm (83.27 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	33.00 gpm (124.91 lpm)
Maximum Loader Hydraulic Pressure	4061 psi
Pump Flow	22.20 gpm (84.03 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	7,308.00 lbs (3,314.86 kg)
Bucket Capacity	0.60 cu yd (0.46 cu m)
Operating Load	3,850.00 lbs (1,746.33 kg)
Tipping Angle	7721 degrees

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,308.00 lbs (3,314.86 kg)
Cooling System Fluid Capacity	3.70 gal (14.00 l)
Engine Oil Capacity	2.70 gal (10.22 l)
Fuel Capacity	25.90 gal (98.03 l)
Ground Contact Area	2,504.00 cu in (41,033.30 cu cm)
Ground Pressure	4.1 psi
Hydraulic System Fluid Capacity	15.10 gal (57.15 l)
Max Speed - high range	8.50 mph (13.68 kph)
Max Speed - low range	5.10 mph (8.21 kph)
Operating Voltage	12 volts
Operating Weight	10,365.00 lbs (4,701.49 kg)
Rated Operating Capacities - 35% Tipping Load	2,695.00 lbs (1,222.43 kg)
Rated Operating Capacities - 50% Tipping Load	3,850.00 lbs (1,746.33 kg)
Rated Operating Capacity with Optional Counterweight	4,101.00 lbs (1,860.18 kg)
Tipping Load	7,721.00 lbs (3,502.19 kg)

Power Train

Travel Speed Forward	5.00 mph (8.05 kph)
Travel Speed Forward - 2-Speed	8.50 mph (13.68 kph)
Travel Speed Reverse	5.00 mph (8.05 kph)
Travel Speed Reverse - 2-Speed	8.50 mph (13.68 kph)

Service Refill Capacities

Cooling System	3.70 gal (14.00 l)
Engine Crankcase	2.60 gal (9.84 l)
Fuel Tank	26.00 gal (98.41 l)
Hydraulic System	15.00 gal (56.78 l)
Hydraulic Tank	11.00 gal (41.64 l)

Undercarriage

Ground Contact Area	2,504.00 cu in (41,033.30 cu cm)
Ground Pressure	4.1 psi
Length of Track on Ground	5.80 ft (1.77 m)

Weights

Operating Weight

10,365.00 lbs (4,701.49 kg)

Caterpillar 289Cs currently for sale

A Caterpillar 289C From Finning CAT for $67,500.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon