Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Bucket Pin Height - Carry Position | 7.5 in |
Bucket Pin Height - Maximum Lift | 10.5 ft |
Bucket Pin Reach - Maximum Lift | 14.5 in |
Clearance at Max Lift and Dump | 7.9 ft |
Clearance at Maximum Lift and Dump | 94 in |
Departure Angle | 33 deg |
Dump angle | 51 deg |
Ground Clearance | 8.9 in |
Height - Top of Cab | 7 ft |
Length - Track on Ground | 64.2 in |
Length - with Bucket | 12.2 ft |
Length - With Bucket on Ground | 146.2 in |
Maximum Dump Angle | 51 deg |
Maximum Overall Height | 158.1 in |
Maximum Reach - With Arms Parallel to Ground | 50 in |
Overall Height | 13.2 ft |
Overall Length - Track | 83.8 in |
Overall Track Length | 7 ft |
Rack Back Angle - Maximum Height | 84 deg |
Reach - Maximum Lift/Dump | 30 in |
Reach at Max Lift and Dump | 2.5 ft |
Turning Radius from Center - Bucket | 88.8 in |
Turning Radius from Center - Coupler | 55.5 in |
Vehicle Width (400 mm/15.7 in tracks) | 76 in |
Vehicle Width (450 mm/17.7 in tracks) | 78 in |
Width Over Tracks | 6.4 ft |
Bore | 3.7 in |
Displacement | 203 cu in |
Engine Make | DIT |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power | 74.3 hp (55 kw) |
Gross Power - SAE J1995 | 74.3 hp (55 kw) |
Net Power | 72.9 hp (54 kw) |
Net Power - ISO 9249 | 73.7 hp (54 kw) |
Net Power - SAE 1349 | 72.9 hp (54 kw) |
Peak Torque | 195.5 lbs ft |
Peak Torque - 1,500 rpm - SAE J1995 | 195 ft |
Stroke | 4.7 in |
Torque Measured @ | 1500 rpm |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76 hp (57 kw) |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32 gpm |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44 hp (33 kw) |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi |
Pump Flow | 22.8 gpm |
Relief Valve Pressure | 3335.9 psi |
Breakout Force | 7290.7 lbs |
Operating Load Rating | 2660 lbs |
Operating Width | 76 in |
Tipping Load | 7599.4 lbs |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 103 dB(A) |
Alternator Supplied Amperage | 80 amps |
Breakout Force - Tilt Cylinder | 7291 lbs |
Cooling System Fluid Capacity | 3.7 gal |
Fuel Capacity | 24.9 gal |
Ground Contact Area - With 400 mm/15.7 in Track | 2015 cu in |
Ground Contact Area - With 450 mm/17.7 in Track | 2272 cu in |
Ground Pressure - With 400 mm/15.7 in Track | 5.2 psi |
Ground Pressure - With 450 mm/17.7 in Track | 4.6 psi |
Hydraulic System Fluid Capacity | 13.8 gal |
Max Speed - high range | 7.1 mph (11 kph) |
Max Speed - low range | 4.5 mph (6 kph) |
Operating Voltage | 12 volts |
Operating Weight | 10533.7 lbs |
Rated Operating Capacities - 35% Tipping Load | 2660 lbs |
Rated Operating Capacities - 50% Tipping Load | 3800 lbs |
Rated Operating Capacity with Optional Counterweight | 4050 lbs |
Tipping Load | 7600 lbs |
Travel Speed - Forward or Reverse - One Speed | 4.5 mph (6 kph) |
Travel Speed - Forward or Reverse - Two Speed | 7 mph (11 kph) |
Cooling System | 3.7 gal |
Engine Crankcase | 3 gal |
Fuel Tank | 24.8 gal |
Hydraulic System | 13.7 gal |
Hydraulic Tank | 10.3 gal |
Ground Contact Area | 2015.1 cu in |
Ground Pressure | 5.3 psi |
Length of Track on Ground | 5.4 ft |
Operating Weight | 10533 lbs |