Caterpillar 297D2 XHP (2015) Compact Track Loader Specs

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 297D2 XHP (2015) ➔

Air Conditioning System

Caterpillar 297D2 XHP (2015) Compact Track Loader Air Conditioning System specifications
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Cab

Caterpillar 297D2 XHP (2015) Compact Track Loader Cab specifications
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008

Dimensions

Caterpillar 297D2 XHP (2015) Compact Track Loader Dimensions specifications
Bucket Pin Height - Carry Position	7.90 in (20.07 cm)
Bucket Pin Height - Maximum Lift	10.70 ft (3.26 m)
Bucket Pin Reach - Maximum Lift	15.20 in (38.61 cm)
Clearance at Maximum Lift and Dump	96.30 in (244.60 cm)
Departure Angle	30 degrees
Ground Clearance	0.80 ft (0.24 m)
Height - Top of Cab	7.00 ft (2.13 m)
Length - Track on Ground	71.10 in (180.59 cm)
Length - With Bucket on Ground	155.20 in (394.21 cm)
Length - Without Bucket	126.00 in (320.04 cm)
Maximum Dump Angle	52 degrees
Maximum Overall Height	160.50 in (407.67 cm)
Maximum Reach - With Arms Parallel to Ground	49.60 in (125.98 cm)
Overall Length - Track	90.00 in (228.60 cm)
Rack Back Angle - Maximum Height	83 degrees
Reach - Maximum Lift/Dump	30.50 in (77.47 cm)
Roll Back Angle	27 degrees
Turning Radius from Center - Bucket (racked)	91.80 in (233.17 cm)
Turning Radius from Center - Coupler	59.20 in (150.37 cm)
Turning Radius from Center - Machine Rear	73.40 in (186.44 cm)
Vehicle Width	78.10 in (198.37 cm)

Engine

Caterpillar 297D2 XHP (2015) Compact Track Loader Engine specifications
Bore	3.90 in (9.91 cm)
Displacement	232.00 cu in (3,801.81 cu cm)
Engine Model	Cat C3.8 DIT (turbo)
Gross Power - SAE J1995	110.00 hp (82.03 kw)
Net Power	106.00 hp (79.05 kw)
Net Power - ISO 9249	107.00 hp (79.79 kw)
Net Power - SAE 1349	106.00 hp (79.05 kw)
Peak Torque - 1,500 rpm - SAE J1995	276.00 ft (84.12 m)
Stroke	4.70 in (11.94 cm)

Hydraulic System

Caterpillar 297D2 XHP (2015) Compact Track Loader Hydraulic System specifications
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44.00 hp (32.81 kw)
Hydraulic Flow - Standard - Loader Hydraulic Flow	23.00 gpm (87.06 lpm)
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi

Noise Level

Caterpillar 297D2 XHP (2015) Compact Track Loader Noise Level specifications
Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	104 dB(A)

Operating Specifications

Caterpillar 297D2 XHP (2015) Compact Track Loader Operating Specifications specifications
Breakout Force - Lift Cylinder	6,072.00 lbs (2,754.22 kg)
Breakout Force - Tilt Cylinder	7,468.00 lbs (3,387.43 kg)
Ground Contact Area	2,561.00 cu in (41,967.36 cu cm)
Ground Pressure	4.3 psi
Rated Operating Capacities - 35% Tipping Load	3,360.00 lbs (1,524.07 kg)
Rated Operating Capacities - 50% Tipping Load	4,800.00 lbs (2,177.25 kg)
Rated Operating Capacity with Optional Counterweight	5,060.00 lbs (2,295.18 kg)
Tipping Load	9,600.00 lbs (4,354.49 kg)

Power Train

Caterpillar 297D2 XHP (2015) Compact Track Loader Power Train specifications
Travel Speed - Forward or Reverse - One Speed	5.90 mph (9.50 kph)
Travel Speed - Forward or Reverse - Two Speed	9.40 mph (15.13 kph)

Service Refill Capacities

Caterpillar 297D2 XHP (2015) Compact Track Loader Service Refill Capacities specifications
Cooling System	4.10 gal (15.52 l)
Diesel Exhaust Fluid (DEF) Tank	5.00 gal (18.93 l)
Engine Crankcase	3.50 gal (13.25 l)
Fuel Tank	32.20 gal (121.88 l)
Hydraulic System	14.50 gal (54.88 l)
Hydraulic Tank	10.30 gal (38.99 l)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon