Category : Compact Track Loaders ➔ Manufacturer : Caterpillar ➔ Model : 299D XHP ➔
The Caterpillar 299D XHP is a compact track loader designed for high-performance material handling, grading, and attachment work in demanding jobsite conditions. It features a vertical lift design, high-flow hydraulic capability, and a powerful diesel engine suited for heavy-duty applications. The 299D XHP is commonly used in construction, landscaping, agriculture, and site preparation where traction, stability, and lift capacity are important. As part of Caterpillar's D Series compact track loader lineup, it is built to support a wide range of attachments and operate on soft, uneven, or muddy terrain with reduced ground disturbance compared with wheeled loaders.
Cab
Caterpillar 299D XHP Compact Track Loader Cab specifications
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Rops
SAE J1040 MAY94, ISO 3471:1994
Dimensions
Caterpillar 299D XHP Compact Track Loader Dimensions specifications
Bucket Pin Height - Carry Position
7.70 in (19.56 cm)
Bucket Pin Height - Maximum Lift
10.55 ft (3.22 m)
Bucket Pin Reach - Maximum Lift
16.11 in (40.92 cm)
Clearance At Maximum Lift And Dump
95.20 in (241.81 cm)
Departure Angle
39 degrees
Ground Clearance
0.73 ft (0.22 m)
Height
6.75 ft (2.06 m)
Height - Top Of Cab
6.98 ft (2.13 m)
Length
12.50 ft (3.81 m)
Length - Track On Ground
69.60 in (176.78 cm)
Length - With Bucket On Ground
151.60 in (385.06 cm)
Length - Without Bucket
123.50 in (313.69 cm)
Maximum Dump Angle
52 degrees
Maximum Overall Height
159.40 in (404.88 cm)
Maximum Reach - With Arms Parallel
50.70 in (128.78 cm)
Overall Length - Track
89.40 in (227.08 cm)
Rack Back Angle - Maximum Height
83 degrees
Reach At Maximum Lift/Dump
31.00 in (78.74 cm)
Turn Radius From Center - Bucket
92.40 in (234.70 cm)
Turn Radius From Center - Coupler
60.40 in (153.42 cm)
Turn Radius From Center - Rear
72.80 in (184.91 cm)
Vehicle Width
76.00 in (193.04 cm)
Weight
11,612.00 lbs (5,267.12 kg)
Width
6.42 ft (1.96 m)
Engine
Caterpillar 299D XHP Compact Track Loader Engine specifications
Bore
3.90 in (9.91 cm)
Displacement
232.00 cu in (3,801.81 cu cm)
Engine Model
Cat C3.8 (turbocharged)
Gross Power
110.00 hp (82.03 kw)
Gross Power - Sae J1995
110.00 hp (82.03 kw)
Net Power
106.00 hp (79.05 kw)
Net Power - Sae 1349
106.00 hp (79.05 kw)
Stroke
4.70 in (11.94 cm)
Hydraulic System
Caterpillar 299D XHP Compact Track Loader Hydraulic System specifications
Hydraulic Flow (1)
Standard
Hydraulic Flow (2)
XHP
Hydraulic Power
44.00 hp (32.81 kw)
Hydraulic Power - Calculated
94.00 hp (70.10 kw)
Loader Hydraulic Flow
23.00 gpm (87.06 lpm)
Loader Hydraulic Pressure
3335 psi
Maximum Loader Hydraulic Flow
40.00 gpm (151.40 lpm)
Maximum Loader Hydraulic Pressure
4061 psi
Operating Specifications
Caterpillar 299D XHP Compact Track Loader Operating Specifications specifications
Breakout Force - Lift Cylinder
6,100.00 lbs (2,766.92 kg)
Breakout Force - Tilt Cylinder
7,381.00 lbs (3,347.97 kg)
Ground Contact Area
2184 in2
Ground Pressure
5.3 psi
Rated Operating Capacities - 35% Tipping Load
3,185.00 lbs (1,444.69 kg)
Rated Operating Capacities - 50% Tipping Load
4,550.00 lbs (2,063.85 kg)
Tipping Load
9,100.00 lbs (4,127.70 kg)
Operational
Caterpillar 299D XHP Compact Track Loader Operational specifications
Operating Weight
11,647.00 lbs (5,283.00 kg)
Power Train
Caterpillar 299D XHP Compact Track Loader Power Train specifications
Travel Speed Forward
5.00 mph (8.05 kph)
Travel Speed Forward - 2-Speed
8.50 mph (13.68 kph)
Travel Speed Reverse
5.00 mph (8.05 kph)
Travel Speed Reverse - 2-Speed
8.50 mph (13.68 kph)
Service Refill Capacities
Caterpillar 299D XHP Compact Track Loader Service Refill Capacities specifications
Cooling System
3.70 gal (14.00 l)
Engine Crankcase
2.60 gal (9.84 l)
Fuel Tank
30.80 gal (116.58 l)
Hydraulic System
16.00 gal (60.56 l)
Hydraulic Tank
10.30 gal (38.99 l)
