All Equipment Category Specs ↠ Compact Track Loaders ↠ Gehl CTL60

Gehl CTL60 Compact Track Loader

Category: Compact Track Loaders (See all Compact Track Loaders for sale)
Manufacturer: Gehl (See all Gehl Equipment for sale)
Model: CTL60 (See all Gehl CTL60 for sale)

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	12 in (31 cm)
Height - Top of Cab	7 ft (2 m)
Length - with Bucket	12 ft (4 m)
Length - without Bucket	9 ft (3 m)
Reach at Max Lift and Dump	3 ft (1 m)
Turning Radius from Center - inc bucket	93 in (236 cm)
Turning Radius from Center - machine rear	61 in (155 cm)
Width Over Tracks	5 ft (2 m)

Engine

Aspiration	natural
Displacement	203 cu in (3,318 cu cm)
Engine Model	4TNV98
Net Power	66 hp (49 kw)
Number of Cylinders	4
Peak Torque	181 lbs ft (245 nm)
Power Measured @	2450 rpm
Torque Measured @	1600 rpm

Hydraulic System

Pump Flow	18 gpm (68 lpm)
Relief Valve Pressure	2988 psi

Loader

Breakout Force	6,728 lbs (3,052 kg)
Operating Load	2,315 lbs (1,050 kg)
Tipping Angle	4630 degrees

Operating Specifications

Alternator Supplied Amperage	40 amps
Cooling System Fluid Capacity	3 gal (11 l)
Engine Oil Capacity	3 gal (10 l)
Fuel Capacity	20 gal (75 l)
Hydraulic System Fluid Capacity	10 gal (39 l)
Max Speed - high range	6 mph (10 kph)
Max Speed - low range	5 mph (7 kph)
Operating Voltage	12 volts
Operating Weight	7,497 lbs (3,401 kg)

Undercarriage

Ground Pressure	4.9 psi
Length of Track on Ground	5 ft (1 m)
Number of Track Rollers per Side	4
Width of Track	13 in (32 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon