Categories ↠ Compact Track Loaders ↠ Gehl CTL65

Gehl CTL65 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Gehl ➔
Model: CTL65 ➔

Dimensions

Clearance at Max Lift and Dump	7.80 ft (2.38 m)
Ground Clearance	12.30 in (31.24 cm)
Height - Top of Cab	7.00 ft (2.13 m)
Length - with Bucket	11.70 ft (3.57 m)
Length - without Bucket	9.10 ft (2.77 m)
Reach at Max Lift and Dump	2.40 ft (0.73 m)
Turning Radius from Center - inc bucket	93.00 in (236.22 cm)
Turning Radius from Center - machine rear	61.00 in (154.94 cm)
Width Over Tracks	5.20 ft (1.58 m)

Engine

Aspiration	Natural
Displacement	202.50 cu in (3,318.39 cu cm)
Engine Model	4TNV98
Gross Power	67.00 hp (49.96 kw)
Number of Cylinders	4
Peak Torque	179.00 lbs ft (242.69 nm)
Power Measured @	2500 rpm
Torque Measured @	1600 rpm

Hydraulic System

Pump Flow	18.40 gpm (69.64 lpm)
Relief Valve Pressure	2988 psi

Loader

Bucket Capacity	0.60 cu yd (0.46 cu m)
Operating Load	2,314.90 lbs (1,050.02 kg)
Tipping Angle	4629.8 degrees

Operating Specifications

Alternator Supplied Amperage	40 amps
Cooling System Fluid Capacity	4.40 gal (16.65 l)
Engine Oil Capacity	2.70 gal (10.22 l)
Fuel Capacity	19.90 gal (75.32 l)
Hydraulic System Fluid Capacity	10.20 gal (38.61 l)
Max Speed - high range	6.80 mph (10.94 kph)
Max Speed - low range	4.50 mph (7.24 kph)
Operating Voltage	12 volts
Operating Weight	8,013.90 lbs (3,635.05 kg)

Undercarriage

Ground Pressure	4.9 psi
Length of Track on Ground	1,389.00 ft (423.37 m)
Number of Track Rollers per Side	4
Width of Track	320.00 in (812.80 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon