Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout force, curl | 7187.1 lbs (3,260 kg) |
Breakout force, lift | 5807 lbs (2,634 kg) |
General Purpose Bucket Heaped | 0.7 cu yd (1 cu m) |
General Purpose Bucket Height | 1.8 ft (1 m) |
General Purpose Bucket Length | 2.7 ft (1 m) |
General Purpose Bucket Weight | 575.5 lbs (261 kg) |
General Purpose Bucket Width | 7.1 ft (2 m) |
Landscape Bucket Heaped cap | 0.9 cu yd (1 cu m) |
Landscape Bucket Height | 1.8 ft (1 m) |
Landscape Bucket Length | 3.2 ft (1 m) |
Landscape Bucket Weight | 0.5 cu in (0 cu m) |
Landscape Bucket Width | 6.5 ft (2 m) |
Multi Purpose Bucket Heaped cap | 0.9 cu yd (1 cu m) |
Multi Purpose Bucket Height | 2.3 ft (1 m) |
Multi Purpose Bucket Length | 3.2 ft (1 m) |
Multi Purpose Bucket Weight | 884.1 lbs (401 kg) |
Multi Purpose Bucket Width | 7.1 ft (2 m) |
Cooling system | 4.1 gal (16 l) |
Engine oil w/ filter change | 4 gal (15 l) |
Fuel Tank | 27.3 gal (103 l) |
Hydraulic oil reservoir | 6.9 gal (26 l) |
Hydraulic system | 15.9 gal (60 l) |
Tipping Load | 8626.7 lbs (3,913 kg) |
Angle of departure | 28.7 degrees |
Attachment roll back angle | 30 degrees |
Clearance at Max Lift and Dump | 7.9 ft (2 m) |
Dump angle | 42 degrees |
Dump Height | 7.9 ft (2 m) |
Dump reach | 35.5 in (90 cm) |
Height - Top of Cab | 6.9 ft (2 m) |
Height to Hinge Pin | 125.2 in (318 cm) |
Length - with Bucket | 12.5 ft (4 m) |
Length - without Bucket | 9 ft (3 m) |
Overall height | 6.9 ft (2 m) |
Overall length (L/bucket) | 10 ft (3 m) |
Overall length (W/bucket) | 12.5 ft (4 m) |
Reach at Max Lift and Dump | 3 ft (1 m) |
Turning Radius | 5.8 ft (2 m) |
Turning Radius from Center - inc bucket | 69.3 in (176 cm) |
Turning Radius from Center - machine rear | 69.3 in (176 cm) |
Turning radius front L/bucket | 4.9 ft (1 m) |
Turning radius front W/bucket | 8 ft (2 m) |
Wheelbase | 5.9 ft (2 m) |
Width Over Tracks | 6.5 ft (2 m) |
Alternator | 342000 amps |
Battery | 12 - 109 (V - Ah) |
Fuel Type | Diesel |
Gross horsepower - SAE J1995 | 74 hp (55 kw) |
Max Torque | 295.1 lbs ft |
Net Power | 92 hp (69 kw) |
Number of Cylinders | 4 |
Peak Torque | 301 lbs ft |
Power Measured @ | 2200 rpm |
Starter | 5.7 hp (4 kw) |
Torque Measured @ | 1800 rpm |
Pump Flow | 23 gpm (87 lpm) |
Relief Valve Pressure | 3335 psi |
Bucket Capacity | 0.9 cu yd (1 cu m) |
High flow pump output | 33.1 gpm (125 lpm) |
Operating Load | 3000 lbs (1,361 kg) |
Operating Width | 78 in (198 cm) |
Standard hydraulic pump output | 23.8 gpm (90 lpm) |
System pressure | 3335 psi |
Tipping Angle | 8628 degrees |
Alternator Supplied Amperage | 95 amps |
Cooling System Fluid Capacity | 4.1 gal (16 l) |
Engine Oil Capacity | 4 gal (15 l) |
Fuel Capacity | 27.3 gal (103 l) |
Hydraulic System Fluid Capacity | 15.9 gal (60 l) |
Max Speed - high range | 7.9 mph (13 kph) |
Max Speed - low range | 5.8 mph (9 kph) |
Operating Voltage | 12 volts |
Operating Weight | 10663 lbs (4,837 kg) |
Curl | 1.7 seconds |
Dump | 2.3 seconds |
Lift arm path | Vertical |
Lower (power down) | 3.5 seconds |
Raise (lifting) | 5.1 seconds |
Rated operating load, 35% tip | 3000.5 lbs (1,361 kg) |
Single speed | 5.7 mph (9 kph) |
Width of Track | 17.8 in (45 cm) |
Weight | 11287.7 lbs (5,120 kg) |