Categories ↠ Crawler Cranes ↠ Kobelco 7250-2F

Kobelco 7250-2F Crawler Crane

Category: Crawler Cranes ➔
Manufacturer: Kobelco ➔
Model: 7250-2F ➔

Boom

Max Elevating Angle	90 degrees
Max Height @ Max Raise Angle - no jib	250.00 ft (76.20 m)
Max Lift Capacity	499,999.60 lbs (226,796.29 kg)
Min Height @ Max Raise Angle	49.90 ft (15.21 m)
Swing Speed	2.2 rpm

Dimensions

Ground Clearance	1.50 ft (0.46 m)
Operating Width	24.60 ft (7.50 m)
Tail Swing Radius	19.20 ft (5.85 m)
Transport Height	29.30 ft (8.93 m)
Transport Width	21.00 ft (6.40 m)

Engine

Air cleaner	Dry type with replaceable paper element
Displacement	642.00 cu in (10,520.52 cu cm)
Emissions level	EPA Tier III
Engine Make	Hino
Engine Model	P11C-UN
Engine Type	Water-cooled direct fuel injection with turbocharger
Fuel Filter	Replaceable paper element
Gross Power	331.30 hp (247.05 kw)
Max Torque	958.90 lbs ft (1,300.08 nm)
Power Measured @	2000 rpm
Starter	8.10 hp (6.04 kw)
Torque Measured @	1500 rpm

Operating Specifications

Fuel Capacity	105.70 gal (400.07 l)
Hydraulic System Fluid Capacity	158.60 gal (600.30 l)
Line pull - Main winches	29,674.80 lbs (13,460.28 kg)
Operating Weight	422,000.10 lbs (191,416.26 kg)
Rope diameter- Main winches	1.20 in (3.05 cm)

Transmission

Max Speed

0.70 mph (1.13 kph)

Undercarriage

Width of Shoes

42.20 in (107.19 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon