- Category: Crawler Dozers ➔
- Manufacturer: Case ➔
- Model: 850M ➔
The Case 850M is a crawler dozer designed for grading, site preparation, and general earthmoving applications. It is part of Case Construction Equipment's M Series and is commonly used in construction, land clearing, road work, and utility projects. The 850M features a hydrostatic transmission, responsive blade control, and a cab designed for operator visibility and comfort. Available blade and undercarriage configurations support a range of jobsite conditions. The machine is built for maneuverability, traction, and consistent dozing performance in confined or uneven terrain. It is used by contractors, municipalities, and land development crews for medium-duty dozing tasks.
Blades
| Blade Capacity | 41.60 cu yd (31.80 cu m)
|
| Blade Height | 44.10 in (112.01 cm)
|
| Blade Type | PAT
|
| Blade Width | 11.10 ft (3.38 m)
|
Capacities
| Engine oil with filter | 4.40 gal (16.65 l)
|
Dimensions
| Blade depth below ground | 19.30 in (49.02 cm)
|
| Blade lift above ground | 34.10 in (86.61 cm)
|
| Ground Clearance | 1.10 ft (0.34 m)
|
| Height - Top of Cab | 116.40 in (295.66 cm)
|
| Height - Top of ROPS/FOPS | 116.40 in (295.66 cm)
|
| Length of Track on Ground | 8.50 ft (2.59 m)
|
| Width Over Tracks | 7.90 ft (2.41 m)
|
Drive System
| Final drive | 2 helical gear
|
| Max drawbar pull | 47,996.80 lbs (21,771.01 kg)
|
| Parking brakes | Heavy-duty spring-applied
|
Electrical System
| Alternator | 120 amp
|
| Batteries | 2 volts
|
| Battery | 12-volt low-maintenance
|
Engine
| Air intake | Cross-Flow
|
| Cooling system | Liquid
|
| Diesel exhaust fluid (DEF) tank capacity | 13.80 gal (52.23 l)
|
| Displacement | 408.90 cu in (6,700.69 cu cm)
|
| Emission Tier Level | Tier4
|
| Engine Model | FPT F4HFE613F
|
| Fan | 26.0 in(660mm)Diameter
|
| Fuel | 2 Diesel
|
| Fuel injection | Common rai
|
| Fuel tank | 85.10 gal (322.10 l)
|
| Gross Power | 138.00 hp (102.91 kw)
|
| Net Power | 127.40 hp (95.00 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 2000 rpm
|
| Pump operating angles - Fore and aft | 45 degrees
|
| Pump operating angles -Side-to-side | 35 degrees
|
| Transmission Type | Hydrostatic
|
Hydraulic System
| Lift cylinder - Rod diameter | 2.00 in (5.08 cm)
|
| Lift cylinder - Stroke | 19.30 in (49.02 cm)
|
| Lift cylinder(s) | 2
|
| Lift cylinder-Bore diameter | 4.30 in (10.92 cm)
|
| Pump type | Variable Displacement Piston
|
Operating Specifications
| center rock guard | 295.50 lbs (134.04 kg)
|
| Long track | 31,133.70 lbs (14,122.03 kg)
|
| Low ground pressure | 32,637.30 lbs (14,804.05 kg)
|
| Operating Weight | 32,637.30 lbs (14,804.05 kg)
|
| Sweeps | 138.90 lbs (63.00 kg)
|
| Winch | 2,447.20 lbs (1,110.03 kg)
|
Performance
| Pump Flow | 34.90 gpm (132.10 lpm)
|
Standard Blade
| Blade Angle (both directions) | 25 degrees
|
Transmission
| Max Speed - Forward | 5.80 mph (9.33 kph)
|
| Max Speed - Reverse | 5.80 mph (9.33 kph)
|
Undercarriage
| Number of bottom rollers per side | 7
|
| Number of Shoes per Side | 43
|
| Number of Upper Rollers | 2
|
| Track Gauge | 0.10 ft (0.03 m)
|
| Width of Shoes | 30.00 in (76.20 cm)
|
Weights
| Cab | 560.00 lbs (254.01 kg)
|
| counterweight | 948.00 lbs (430.01 kg)
|
| Ripper weight | 2,376.60 lbs (1,078.01 kg)
|