Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D4G Crawler Dozer is a powerful and reliable machine designed for heavy-duty earthmoving and construction tasks. With a gross power of 87 hp and a hydraulic system pump flow capacity of 16.2 gpm, this dozer can handle a variety of jobs with ease. The machine's durable construction, comfortable cab design, and advanced features make it a top choice for operators looking for efficiency and performance on the job site.
| Flow at 6890 kPa - (1000 psi) | 16.10 US gpm (61.10 L/min) - Starting 2006 |
|---|---|
| Lift Relief Valve - Setting | 2,900.00 psi (20,000.00 kPa) - Starting 2001 |
| Mounting Point | Fender - Starting 2001 |
| Number of Valves | 3 or 4 - Starting 2001 |
| Ripper Beam - Number of Pockets | 3 - Starting 2001 |
| Ripper Beam - O Overall width | 67.00 in (170.18 cm) - Starting 2001 |
| Ripper Beam - P Height | 6.50 in (16.51 cm) - Starting 2001 |
| Ripper Beam - Q Length | 7.50 in (19.05 cm) - Starting 2001 |
| Ripper Beam - T Pocket Spacing | 31.00 in (78.74 cm) - Starting 2001 |
| Ripper Beam - U Shank Gauge | 61.00 in (154.94 cm) - Starting 2001 |
| Ripper Beam - V Track clearance with - Installed weights - Ripper with standard - shank | 1,220.00 lbs (553.38 kg) - Starting 2001 |
| Ripper Beam - V Track clearance with - standard shoe | 4.40 in (11.18 cm) - Starting 2001 |
| Ripper Forces: - Penetration Force | 5,560.00 lbs (2,521.98 kg) - Starting 2001 |
| Ripper Forces: - Pryout Force | 9,900.00 lbs (4,490.57 kg) - Starting 2001 |
| Ripper Shank - G Maximum digging depth | 13.30 in (33.78 cm) - Starting 2001 |
| Ripper Shank - L Maximum reach at - ground line | 25.00 in (63.50 cm) - Starting 2001 |
| Ripper Shank - M Maximum ground - clearance under tip (shank pinned in bottom hole) | 16.00 in (40.64 cm) - Starting 2001 |
| Ripper Shank - N Maximum ramp angle, - ripper up (shank pinned in bottom hole) | 30 deg - Starting 2001 |
| Ripper Type | Fixed Parallelogram - Starting 2001 |
| Tank Capacity (Oil) | 12.00 US gal (47.00 L) - Starting 2001 |
| Weight Installed | 36.00 lbs (16.33 kg) - Starting 2001 |
| Blade Capacity - Intermediate | 2.3 cu yd |
|---|---|
| Blade Capacity - Lgp | 2.5 cu yd |
| Blade Capacity - Xl | 2.6 cu yd |
| Blade Height - Intermediate | 36.30 in (92.20 cm) |
| Blade Height - Lgp | 36.30 in (92.20 cm) |
| Blade Height - Xl | 40.50 in (102.87 cm) |
| Blade Width - Intermediate | 115.00 in (292.10 cm) |
| Blade Width - Lgp | 123.90 in (314.71 cm) |
| Blade Width - Xl | 105.20 in (267.21 cm) |
| Digging Depth - Intermediate | 20.50 in (52.07 cm) |
| Digging Depth - Lgp | 20.50 in (52.07 cm) |
| Digging Depth - Xl | 22.40 in (56.90 cm) |
| Bulldozer Blade Width - Straight | 8.76 ft (2.67 m) |
|---|---|
| Ground Clearance | 1.23 ft (0.37 m) |
| Height | 8.75 ft (2.67 m) |
| Height To Top Of Cab | 8.92 ft (2.72 m) |
| Length | 13.17 ft (4.01 m) |
| Length Of Track On Ground | 10.19 ft (3.11 m) |
| Length W/ Blade | 13.24 ft (4.04 m) |
| Length W/O Blade | 10.19 ft (3.11 m) |
| Overall Height | 8.92 ft (2.72 m) |
| Weight | 17,317.00 lbs (7,854.87 kg) |
| Width | 6.33 ft (1.93 m) |
| Width Over Tracks | 6.43 ft (1.96 m) |
| Bore | 3.70 in (9.40 cm) |
|---|---|
| Caterpillar | 80.00 hp (59.66 kw) |
| Displacement | 305.00 cu in (4,998.07 cu cm) |
| Eec 80/1269 | 80.00 hp (59.66 kw) |
| Engine Make | 2236 |
| Engine Model | 3046T |
| Gross Power | 87.00 hp (64.88 kw) |
| Iso 9249 | 80.00 hp (59.66 kw) |
| Net Power | 80.00 hp (59.66 kw) |
| Number Of Cylinders | 6 |
| Power - Gross | 87.00 hp (64.88 kw) |
| Power - Net | 80.00 hp (59.66 kw) |
| Power Measured @ | 2200 rpm |
| Sae J1349 | 80.00 hp (59.66 kw) |
| Stroke | 4.70 in (11.94 cm) |
| Pump Output | 16.14 gpm (61.09 lpm) |
|---|---|
| Relief Valve Setting | 2900 psi |
| Pump Flow Capacity | 16.20 gpm (61.32 lpm) |
|---|---|
| Relief Valve Pressure | 2900.8 psi |
| Dig Depth - Vpat Blade | 22.40 in (56.90 cm) |
|---|---|
| Lift Height - Vpat Blade | 27.10 in (68.83 cm) |
| Maximum Angle - Vpat Blade | 25 degrees |
| Maximum Tilt - Vpat Blade | 15.30 in (38.86 cm) |
| Cooling System Fluid Capacity | 5.60 gal (21.20 l) |
|---|---|
| Engine Oil Capacity | 3.50 gal (13.25 l) |
| Final Drives Fluid Capacity | 3.90 gal (14.76 l) |
| Fuel Capacity | 49.50 gal (187.36 l) |
| Hydraulic Fluid Capacity | 12.30 gal (46.56 l) |
| Operating Weight | 18,210.20 lbs (8,260.02 kg) |
| Height | 6.50 in (16.51 cm) |
|---|---|
| Maximum Digging Depth | 13.30 in (33.78 cm) |
| Maximum Ground Clearance Under Tip | 16.20 in (41.15 cm) |
| Maximum Reach - Ground Line | 25.00 in (63.50 cm) |
| Number Of Shanks | 3 |
| Overall Width | 67.30 in (170.94 cm) |
| Ripper Type | Parallelogram |
| Weight | 1,241.00 lbs (562.91 kg) |
| Cooling System | 5.50 gal (20.82 l) |
|---|---|
| Crankcase - With Filter | 3.40 gal (12.87 l) |
| Final Drive - Each - Lgp | 5.70 gal (21.57 l) |
| Final Drive - Each - Xl | 3.90 gal (14.76 l) |
| Fuel Tank | 48.60 gal (183.95 l) |
| Transmission - Hydraulic Tank | 12.00 gal (45.42 l) |
| Blade Angle (Both Directions) | 25 degrees |
|---|---|
| Capacity | 2.6 cu yd |
| Cutting Depth | 22.40 in (56.90 cm) |
| Height | 40.50 in (102.87 cm) |
| Width | 8.80 ft (2.68 m) |
| Fops | SAE J231-JAN81, ISO 3449-92 |
|---|---|
| Rops | SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
| Drive Pumps | 2 |
|---|---|
| Max Speed - Forward | 5.60 mph (9.01 kph) |
| Max Speed - Reverse | 6.00 mph (9.66 kph) |
| Maximum Travel Speed - Forward | 5.60 mph (9.01 kph) |
| Maximum Travel Speed - Reverse | 6.00 mph (9.66 kph) |
| Number Of Forward Gears | 1 |
| Number Of Reverse Gears | 1 |
| Relief Valve Settings | 6380 psi |
| Track Motors | 2 |
| Transmission Type | hydrostatic |
| Ground Contact Area | 31528614.56 in2 |
|---|---|
| Ground Contact Area - Lgp | 4352 in2 |
| Ground Contact Area - Xl | 3153 in2 |
| Ground Pressure | 5.52 psi |
| Ground Pressure - Lgp | 4.11 psi |
| Ground Pressure - Xl | 5.47 psi |
| Length - Track On Ground - Lgp | 87.00 in (220.98 cm) |
| Length - Track On Ground - Xl | 87.00 in (220.98 cm) |
| Number Of Shoes Per Side | 41 |
| Number Of Track Rollers Per Side | 7 |
| Shoe Width - Lgp | 25.00 in (63.50 cm) |
| Shoe Width - Xl | 18.00 in (45.72 cm) |
| Standard Shoe Size | 18.12 in (46.02 cm) |
| Track Gauge | 4.92 ft (1.50 m) |
| Track Gauge - Lgp | 66.00 in (167.64 cm) |
| Track Gauge - Xl | 59.00 in (149.86 cm) |
| Operating Weight - Lgp | 18,073.50 lbs (8,198.01 kg) |
|---|---|
| Operating Weight - Xl | 17,317.30 lbs (7,855.00 kg) |
| Control | Pilot hydraulic |
|---|---|
| Drum Capacity - Optional Cable | 257.00 ft (78.33 m) |
| Drum Capacity - Recommended Cable | 371.00 ft (113.08 m) |
| Drum Diameter | 10.00 in (25.40 cm) |
| Drum Width | 10.80 in (27.43 cm) |
| Maximum Line Pull - Bare Drum | 40,000.00 lbs (18,143.72 kg) |
| Maximum Line Pull - Full Drum | 25,000.00 lbs (11,339.82 kg) |
| Maximum Line Speed - Bare Drum | 131.23 ft/min |
| Maximum Line Speed - Full Drum | 206.69 ft/min |
| Overall Width | 29.20 in (74.17 cm) |
| Rope Diameter - Optional | 0.80 in (2.03 cm) |
| Rope Diameter - Recommended | 0.70 in (1.78 cm) |
| Speed | Variable |
| Throat Clearance | 6.80 in (17.27 cm) |
| Weight | 1,345.00 lbs (610.08 kg) |
| Winch Drive | Hydrostatic |
| Winch Length | 27.80 in (70.61 cm) |