Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D6K2 LGP is a crawler dozer designed for grading, dozing, and finish work in soft or low-ground-pressure conditions. The LGP configuration uses wider tracks to reduce ground pressure and improve flotation on soft soil, wet terrain, and sensitive job sites. The D6K2 platform is commonly used in construction, land clearing, site preparation, and utility work. It features a hydrostatic transmission, responsive blade control, and operator-focused visibility for precision earthmoving. As part of Caterpillar's crawler dozer lineup, the D6K2 LGP is suited to applications requiring traction, stability, and controlled blade performance across varied ground conditions.
| A Length (Blade Straight) | 197.00 in (5,008.00 mm) - Starting 2015 |
|---|---|
| A Length (Blade Straight)*** | 197.00 in (5,008.00 mm) - Starting 2018 |
| B Width (including std. end bits) | 144.00 in (3,682.00 mm) - Starting 2013 |
| Blade Angle | 25 deg - Starting 2015 |
| Blade Capacities | 4.38 cu yd (3.35 cu m) - Starting 2013 |
| Blade Capacities* | 4.38 cu yd (3.35 cu m) - Starting 2018 |
| Blade Types and Widths - VPAT | 144.90 in (3,682.00 mm) - Starting 2013 |
| Blade Types and Widths - VPAT, angled | 131.40 in (3,337.00 mm) - Starting 2015 |
| Blade Types and Widths - VPAT, straight | 145.00 in (3,682.00 mm) - Starting 2015 |
| Bore | 4.13 in (105.00 mm) - Starting 2013 |
| C Height | 50.90 in (1,294.00 mm) - Starting 2013 |
| D Max. Digging Depth | 18.40 in (468.00 mm) - Starting 2013 |
| DEF Exhaust Fluid Refill Capacity | 5.00 US gal (19.00 L) - Starting 2016 |
| DEF Tank Refill Capacity | 5.00 US gal (19.00 L) - Starting 2017 |
| Displacement | 269.00 cu in (4.40 L) - Starting 2016 |
| Each additional shank | 75.00 lbs (34.00 kg) - Starting 2013 |
| Emission Standards | Tier 4 Final/Stage IV/ Japan 2014 (Tier 4 Final) - Starting 2019 |
| Engine Emissions Tier | Tier 3/Stage IIIA Tier 4 Interim/Stage IIIB - Starting 2015 |
| Engine Model | C4.4 ACERT - Starting 2016 |
| Engine Power | 132.00 hp (98.43 kw) - Starting 2016 |
| Engine Type | Cat C4.4 ACERT - Starting 2016 |
| Flywheel Power - Hydrostatic | 130.00 hp (97.00 kW) - Starting 2013 |
| Fuel Tank Refill Capacity | 69.00 US gal (260.00 L) - Starting 2017 |
| G Max. Pitch Adjustment | 6 deg - Starting 2013 |
| G Maximum digging depth | 14.00 in (355.00 mm) - Starting 2013 |
| GENERAL DIMENSIONS - Ground Clearance | 14.20 in (360.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab) | 116.50 in (2,958.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Overall Length (with VPAT Blade) | 184.00 in (4,688.00 mm) - Starting 2013 |
| GENERAL DIMENSIONS - Overall Length - (with VPAT Blade) | 197.00 in (5,008.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Overall Length - (with VPAT Blade)** | 197.00 in (5,008.00 mm) - Starting 2018 |
| GENERAL DIMENSIONS - Overall Length - without Blade | 181.00 in (4,588.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Overall Length - without Blade** | 181.00 in (4,588.00 mm) - Starting 2018 |
| GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - - Std. Shoe) | 108.70 in (2,760.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - - Std. Shoe)* | 108.70 in (2,760.00 mm) - Starting 2018 |
| GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - Std. Shoe) | 108.70 in (2,760.00 mm) - Starting 2019 |
| GENERAL DIMENSIONS - without Blade | 166.00 in (4,220.00 mm) - Starting 2013 |
| Ground Clearance @ Full Lift | 47.30 in (1,201.00 mm) - Starting 2013 |
| Ground Contact Area | 6,200.00 sq in (4.00 sq m) - Starting 2013 |
| Ground Contact Area (w/Std. Shoe) | 6,200.00 sq in (4.00 sq m) - Starting 2013 |
| Ground Contact Area - (w/Std. Shoe) | 6,200.00 sq in (4.00 sq m) - Starting 2015 |
| Ground Pressure | 4.79 psi (33.02 kPa) - Starting 2016 |
| H Max. Hydraulic Tilt | 20.40 in (525.00 mm) - Starting 2013 |
| Installed weights - Each additional shank | 75.00 lbs (34.00 kg) - Starting 2015 |
| Installed weights - Ripper with standard shank | 1,863.00 lbs (845.00 kg) - Starting 2015 |
| L Maximum reach at ground line | 28.50 in (725.00 mm) - Starting 2013 |
| Length (Blade Angled) | 212.00 in (5,399.00 mm) - Starting 2013 |
| Length of Track on Ground | 104.00 in (2,645.00 mm) - Starting 2013 |
| M Maximum ground clearance under tip (shank pinned in bottom hole) | 18.50 in (471.00 mm) - Starting 2015 |
| M Maximum ground clearance under tip - (shank pinned in bottom hole) | 18.50 in (471.00 mm) - Starting 2013 |
| N Maximum ramp angle, ripper up (shank pinned in bottom hole) | 24.8 deg - Starting 2015 |
| N Maximum ramp angle, ripper up - (shank pinned in bottom hole) | 24.8 deg - Starting 2013 |
| No. of Cylinders | 4 - Starting 2016 |
| Number of Pockets | 3 - Starting 2013 |
| O Overall width | 76.80 in (1,951.00 mm) - Starting 2013 |
| Operating Weight - Hydrostatic | 30,664.00 lbs (13,909.00 kg) - Starting 2017 |
| P Height | 6.50 in (165.00 mm) - Starting 2013 |
| Q Length | 8.30 in (211.00 mm) - Starting 2013 |
| Rated Engine RPM | 2200 rpm - Starting 2013 |
| Ripper Beam O Overall width | 76.80 in (1,951.00 mm) - Starting 2017 |
| Ripper Forces - Penetration Force | 10,641.00 lbf (46.00 kN) - Starting 2013 |
| Ripper Forces - Pryout Force | 38,218.00 lbf (170.00 kN) - Starting 2013 |
| Ripper Shank G Maximum digging depth | 14.00 in (355.00 mm) - Starting 2017 |
| Ripper Type | Fixed Parallelogram - Starting 2013 |
| Ripper with standard shank | 1,863.00 lbs (845.00 kg) - Starting 2013 |
| Stroke | 5.00 in (127.00 mm) - Starting 2015 |
| T Pocket Spacing | 35.30 in (896.00 mm) - Starting 2013 |
| Track Gauge | 79.00 in (2,000.00 mm) - Starting 2013 |
| Track Rollers (Each Side) | 8 - Starting 2013 |
| Track Shoe Width | 30.00 in (760.00 mm) - Starting 2013 |
| Type | Variable Pitch Power Angle and Tilt - Starting 2013 |
| U Shank Gauge | 70.60 in (1,792.00 mm) - Starting 2013 |
| V Track clearance with standard shoe | 3.50 in (89.00 mm) - Starting 2013 |
| Weight | 30,664.00 lbs (13,908.97 kg) - Starting 2016 |
| Width (Blade Angled) | 131.40 in (3,337.00 mm) - Starting 2015 |
| Width (with C-Frame only) | 109.00 in (2,760.00 mm) - Starting 2015 |
| Width of Standard Track Shoe | 30.00 in (760.00 mm) - Starting 2013 |
| Make | Cat |
|---|