Create a CEG Account  /  CEG Login
☰


Caterpillar D6K2 XL Crawler Dozer Specs

The Caterpillar D6K2 XL is a crawler dozer designed for grading, dozing, and site preparation in construction, roadwork, and land clearing applications. It is part of Caterpillar's D6K2 series and features an extended track (XL) undercarriage for improved stability and flotation in soft or uneven ground conditions. The machine is commonly equipped with a hydrostatic transmission, a six-way blade, and a rear ripper option for material handling and finish grading. The D6K2 XL is used in earthmoving operations where maneuverability, traction, and precise blade control are required. It is suited to utility, municipal, and general construction work.


General Specifications

Caterpillar D6K2 XL Crawler Dozer General Specifications specifications
A Length (Blade Straight) 197.00 in (5,008.00 mm) - Starting 2015
A Length (Blade Straight)*** 197.00 in (5,008.00 mm) - Starting 2018
B Width (including std. end bits) 126.00 in (3,196.00 mm) - Starting 2013
Blade Angle 25 deg - Starting 2015
Blade Capacities 4.01 cu yd (3.07 cu m) - Starting 2013
Blade Capacities* 4.01 cu yd (3.07 cu m) - Starting 2018
Blade Types and Widths - VPAT 125.80 in (3,196.00 mm) - Starting 2013
Blade Types and Widths - VPAT, angled 114.00 in (2,896.00 mm) - Starting 2015
Blade Types and Widths - VPAT, straight 125.80 in (3,196.00 mm) - Starting 2015
Bore 4.13 in (105.00 mm) - Starting 2013
C Height 50.90 in (1,294.00 mm) - Starting 2013
D Max. Digging Depth 18.40 in (468.00 mm) - Starting 2013
DEF Exhaust Fluid Refill Capacity 5.00 US gal (19.00 L) - Starting 2016
DEF Tank Refill Capacity 5.00 US gal (19.00 L) - Starting 2017
Displacement 269.00 cu in (4.40 L) - Starting 2016
Each additional shank 75.00 lbs (34.00 kg) - Starting 2013
Emission Standards Tier 4 Final/Stage IV/ Japan 2014 (Tier 4 Final) - Starting 2019
Engine Emissions Tier Tier 3/Stage IIIA Tier 4 Interim/Stage IIIB - Starting 2015
Engine Model C4.4 ACERT - Starting 2016
Flywheel Power - Hydrostatic 130.00 hp (97.00 kW) - Starting 2013
Fuel Tank Refill Capacity 69.00 US gal (260.00 L) - Starting 2017
G Max. Pitch Adjustment 6 deg - Starting 2013
G Maximum digging depth 14.00 in (355.00 mm) - Starting 2013
GENERAL DIMENSIONS - Ground Clearance 14.20 in (360.00 mm) - Starting 2015
GENERAL DIMENSIONS - Height (To Top of ROPS Cab) 116.50 in (2,958.00 mm) - Starting 2015
GENERAL DIMENSIONS - Overall Length (with VPAT Blade) 186.00 in (4,738.00 mm) - Starting 2013
GENERAL DIMENSIONS - Overall Length - (with VPAT Blade) 197.00 in (5,008.00 mm) - Starting 2015
GENERAL DIMENSIONS - Overall Length - (with VPAT Blade)** 197.00 in (5,008.00 mm) - Starting 2018
GENERAL DIMENSIONS - Overall Length - without Blade 181.00 in (4,588.00 mm) - Starting 2015
GENERAL DIMENSIONS - Overall Length - without Blade** 181.00 in (4,588.00 mm) - Starting 2018
GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - - Std. Shoe) 91.70 in (2,330.00 mm) - Starting 2015
GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - - Std. Shoe)* 91.70 in (2,330.00 mm) - Starting 2018
GENERAL DIMENSIONS - Width (w/o Trunnion and Blade - Std. Shoe) 91.70 in (2,330.00 mm) - Starting 2019
GENERAL DIMENSIONS - without Blade 171.00 in (4,354.00 mm) - Starting 2013
Ground Clearance @ Full Lift 46.80 in (1,203.00 mm) - Starting 2013
Ground Contact Area 4,650.00 sq in (3.00 sq m) - Starting 2013
Ground Contact Area (w/Std. Shoe) 4,650.00 sq in (3.00 sq m) - Starting 2013
Ground Contact Area - (w/Std. Shoe) 4,650.00 sq in (3.00 sq m) - Starting 2015
Ground Pressure 6.11 psi (42.13 kPa) - Starting 2016
H Max. Hydraulic Tilt 19.20 in (488.00 mm) - Starting 2013
Installed weights - Each additional shank 75.00 lbs (34.00 kg) - Starting 2015
Installed weights - Ripper with standard shank 2,002.00 lbs (908.00 kg) - Starting 2015
L Maximum reach at ground line 28.50 in (725.00 mm) - Starting 2013
Length (Blade Angled) 211.00 in (5,369.00 mm) - Starting 2013
Length of Track on Ground 104.00 in (2,645.00 mm) - Starting 2013
M Maximum ground clearance under tip (shank pinned in bottom hole) 18.50 in (471.00 mm) - Starting 2015
M Maximum ground clearance under tip - (shank pinned in bottom hole) 18.50 in (471.00 mm) - Starting 2013
N Maximum ramp angle, ripper up (shank pinned in bottom hole) 24.8 deg - Starting 2015
N Maximum ramp angle, ripper up - (shank pinned in bottom hole) 24.8 deg - Starting 2013
No. of Cylinders 4 - Starting 2016
Number of Pockets 3 - Starting 2013
O Overall width 76.80 in (1,951.00 mm) - Starting 2013
Operating Weight - Hydrostatic 29,258.00 lbs (13,271.00 kg) - Starting 2017
P Height 6.50 in (165.00 mm) - Starting 2013
Q Length 8.30 in (211.00 mm) - Starting 2013
Rated Engine RPM 2200 rpm - Starting 2013
Ripper Beam O Overall width 76.80 in (1,951.00 mm) - Starting 2017
Ripper Forces - Penetration Force 9,666.80 lbf (43.00 kN) - Starting 2013
Ripper Forces - Pryout Force 38,218.00 lbf (170.00 kN) - Starting 2013
Ripper Shank G Maximum digging depth 14.00 in (355.00 mm) - Starting 2017
Ripper Type Fixed Parallelogram - Starting 2013
Ripper with standard shank 2,002.00 lbs (908.00 kg) - Starting 2013
Stroke 5.00 in (127.00 mm) - Starting 2015
T Pocket Spacing 35.30 in (896.00 mm) - Starting 2013
Track Gauge 70.00 in (1,770.00 mm) - Starting 2013
Track Rollers (Each Side) 8 - Starting 2013
Track Shoe Width 22.00 in (560.00 mm) - Starting 2013
Type Variable Pitch Power Angle and Tilt - Starting 2013
U Shank Gauge 70.60 in (1,792.00 mm) - Starting 2013
V Track clearance with standard shoe 3.20 in (81.00 mm) - Starting 2013
Width (Blade Angled) 113.30 in (2,878.00 mm) - Starting 2013
Width (with C-Frame only) 92.00 in (2,330.00 mm) - Starting 2015
Width of Standard Track Shoe 22.00 in (560.00 mm) - Starting 2013

Engine

Caterpillar D6K2 XL Crawler Dozer Engine specifications
Make Cat
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.