Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D6N LGP is a crawler dozer designed for grading, pushing, and site preparation in soft or low-ground-pressure conditions. The LGP configuration uses wider tracks to reduce ground pressure and improve flotation on sensitive terrain such as wetlands, soft soil, and reclaimed sites. The D6N platform is commonly used in construction, land clearing, road building, and utility work. It is equipped with a Caterpillar diesel engine, hydrostatic or power shift drivetrain depending on configuration, and a dozer blade for material movement and finish grading. The Caterpillar D6N LGP is part of the crawler dozers category.
| Blade arrangement - A Length (Blade Straight) | 212.50 in (5,398.00 mm) - Starting 2012 |
|---|---|
| Blade arrangement - B Width (including std. end bits) | 160.70 in (4,082.00 mm) - Starting 2012 |
| Blade arrangement - Blade Angle | 24.1 deg - Starting 2012 |
| Blade arrangement - Blade Capacities | 5.06 cu yd (3.87 cu m) - Starting 2015 |
| Blade arrangement - Blade Dimensions | inside mounted - Starting 2012 |
| Blade arrangement - C Height | 40.90 in (1,040.00 mm) - Starting 2010 |
| Blade arrangement - D Max. Digging Depth | 19.70 in (500.00 mm) - Starting 2012 |
| Blade arrangement - E Ground Clearance @ Full Lift | 41.40 in (1,052.00 mm) - Starting 2012 |
| Blade arrangement - G Max. Pitch | 54 - 62 deg |
| Blade arrangement - G Max. Pitch Adjustment | 54 - 62 deg |
| Blade arrangement - H Max. Hydraulic Tilt | 23.00 in (585.00 mm) - Starting 2012 |
| Blade arrangement - Length (Blade Angled) | 245.80 in (6,243.00 mm) - Starting 2017 |
| Blade arrangement - Mounting | inside mounted - Starting 2010 |
| Blade arrangement - Type | Variable Pitch Power Angle and Tilt - Starting 2010 |
| Blade arrangement - Width (Blade Angled) | 145.60 in (3,699.00 mm) - Starting 2017 |
| Blade arrangement - Width (with C-Frame only) | 116.70 in (2,965.00 mm) - Starting 2017 |
| Blade arrangement shipping weight | 6,041.00 lbs (2,740.00 kg) - Starting 2012 |
| Blade Types and Widths - VPAT | 160.70 in (4,082.00 mm) - Starting 2012 |
| Blade Types and Widths - VPAT (Variable pitch, angle & tilt) | 161.00 in (4.08 m) - Starting 2006 |
| Blade Types and Widths - VPAT (Variable pitch, angle, and tilt) straight | 161.00 in (4.08 m) - Starting 2010 |
| Bore | 4.13 in (105.00 mm) - Starting 2010 |
| Diesel Exhaust Fluid Refill Capacity | 5.00 US gal (19.00 L) - Starting 2016 |
| Displacement | 433.00 cu in (7.10 L) - Starting 2016 |
| Each additional shank | 172.00 lbs (78.00 kg) - Starting 2013 |
| Emission Standards | Tier 4 Final/Stage IV/ Japan 2014 (Tier 4 Final) - Starting 2019 |
| Engine Emissions Tier | Tier 4 Interim/Stage IIIB - Starting 2013 |
| Engine Model | C7.1 ACERT - Starting 2016 |
| Flywheel Power | 150.00 hp (111.80 kW) - Starting 2010 |
| Flywheel Power - Hydrostatic | 150.00 hp (111.80 kW) - Starting 2013 |
| Flywheel Power - Power Shift | 166.00 hp (124.00 kW) - Starting 2016 |
| Fuel Tank Refill Capacity | 73.20 US gal (277.00 L) - Starting 2016 |
| G Maximum digging depth | 23.70 in (602.00 mm) - Starting 2013 |
| GENERAL DIMENSIONS - (Without Blade) | 164.00 in (4,165.00 mm) - Starting 2010 |
| GENERAL DIMENSIONS - Ground Clearance | 20.00 in (507.00 mm) - Starting 2012 |
| GENERAL DIMENSIONS - Height (Stripped Top) | 97.00 in (2.47 m) - Starting 2006 |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab) | 125.60 in (3,190.00 mm) - Starting 2013 |
| GENERAL DIMENSIONS - Height (To Top of ROPS Canopy) | NA - Starting 2016 |
| GENERAL DIMENSIONS - Overall Length (with VPAT Blade) | 212.60 in (5,401.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Overall Length (without Blade) | 164.00 in (4.17 m) - Starting 2010 |
| GENERAL DIMENSIONS - Overall Length - (with VPAT Blade) | 230.30 in (5,851.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Overall Length - (without Blade) | 164.00 in (4,165.00 mm) - Starting 2012 |
| GENERAL DIMENSIONS - Overall Length - without Blade | 164.00 in (4,165.00 mm) - Starting 2015 |
| GENERAL DIMENSIONS - Width (w/o Trunnion - - Std. Shoe) | 118.00 in (3,000.00 mm) - Starting 2010 |
| GENERAL DIMENSIONS - Width (w/o Trunnion - Std. Shoe) | 118.00 in (3,000.00 mm) - Starting 2013 |
| GENERAL DIMENSIONS - Width (w/o Trunnion - Std. Shoe)* | 118.00 in (3,000.00 mm) - Starting 2018 |
| GENERAL DIMENSIONS - with VPAT Blade | 211.00 in (5.37 m) - Starting 2010 |
| GENERAL DIMENSIONS - without Blade | 163.20 in (4,146.00 mm) - Starting 2016 |
| Ground Contact Area | 8,122.00 sq in (5.24 sq m) - Starting 2017 |
| Ground Contact Area (w/Std. Shoe) | 8,122.00 sq in (5.24 sq m) - Starting 2013 |
| Ground Contact Area (with Std. Shoe) | 8,122.00 sq in (5.24 sq m) - Starting 2010 |
| Ground Contact Area - (w/Std. Shoe) | 8,122.00 sq in (5.24 sq m) - Starting 2012 |
| Ground Pressure | 4.96 psi (34.20 kPa) - Starting 2013 |
| Installed weights - Each additional shank | 172.00 lbs (78.00 kg) - Starting 2010 |
| Installed weights - Ripper with standard shank | 3,100.00 lbs (1,406.00 kg) - Starting 2010 |
| L Maximum reach at ground line | 17.80 in (453.00 mm) - Starting 2010 |
| Length of Track on Ground | 122.40 in (3,110.00 mm) - Starting 2016 |
| M Maximum ground clearance under tip (shank pinned in bottom hole) | 21.10 in (536.00 mm) - Starting 2015 |
| M Maximum ground clearance under tip - (shank pinned in bottom hole) | 21.10 in (536.00 mm) - Starting 2013 |
| N Maximum ramp angle, ripper up (shank pinned in bottom hole) | 28.3 deg - Starting 2015 |
| N Maximum ramp angle, ripper up - (shank pinned in bottom hole) | 28.3 deg - Starting 2013 |
| N Maximum ramp angle, ripper up - Shank section | 2.9" x 6.9 in (73 x 176 mm) - Starting 2015 |
| No. of Cylinders | 6 - Starting 2006 |
| Number of Pockets | 3 - Starting 2010 |
| O Overall width | 87.00 in (2,200.00 mm) - Starting 2013 |
| Operating Weight - Power Shift Differential Steer | 40,446.00 lbs (18,346.00 kg) - Starting 2016 |
| Operating Weight: - Power Shift Clutch Brake (FTC) | 38,872.00 lbs (17,632.00 kg) - Starting 2006 |
| Operating Weight: - Power Shift Differential Steer | 40,166.00 lbs (18,219.00 kg) - Starting 2006 |
| P Height | 8.50 in (216.00 mm) - Starting 2010 |
| Q Length | 10.00 in (254.00 mm) - Starting 2010 |
| Rated Engine RPM | 2200 rpm - Starting 2010 |
| Rated Engine RPM: Power Shift | 2200 rpm - Starting 2006 |
| Ripper Beam O Overall width | 87.00 in (2.20 m) - Starting 2010 |
| Ripper Forces - Penetration Force | 16,389.00 lbf (72.90 kN) - Starting 2015 |
| Ripper Forces - Pryout Force | 56,652.00 lbf (252.00 kN) - Starting 2015 |
| Ripper Forces: - Penetration Force | 16,389.00 lbf (72.90 kN) - Starting 2013 |
| Ripper Forces: - Pryout Force | 56,652.00 lbf (252.00 kN) - Starting 2013 |
| Ripper Shank - Shank Section | 2.9 x 6.9 in (73 x 176 mm) - Starting 2010 |
| Ripper Shank G Maximum digging depth | 14.20 in (360.00 mm) - Starting 2010 |
| Ripper Type | Parallelogram - Starting 2010 |
| Ripper with standard shank | 3,100.00 lbs (1,406.00 kg) - Starting 2013 |
| Stroke | 5.30 in (135.00 mm) - Starting 2016 |
| T Pocket Spacing | 39.40 in (1,000.00 mm) - Starting 2010 |
| Track Gauge | 85.00 in (2.16 m) - Starting 2006 |
| Track Rollers (Each Side) | 8 - Starting 2006 |
| Track Shoe Width | 33.00 in (840.00 mm) - Starting 2013 |
| U Shank Gauge | 79.00 in (2.00 m) - Starting 2010 |
| V Track clearance with standard shoe | 4.10 in (104.00 mm) - Starting 2010 |
| Width of Standard Track Shoe | 33.00 in (840.00 mm) - Starting 2010 |
| Height | 10.25 ft (3.12 m) |
|---|---|
| Length | 18.00 ft (5.49 m) |
| Weight | 42,344.00 lbs (19,206.94 kg) |
| Width | 9.58 ft (2.92 m) |