Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Specs

Category: Crawler Dozers ➔
Manufacturer: Caterpillar ➔
Model: D6N Tier 4 Interim/Stage IIIB ➔

Blades

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Blades specifications
Blade Type	VPAT, SU
Lgp Vpat - Blade Capacity	5.06 cu yd
Lgp Vpat - Blade Width	13.39 ft (4.08 m)
Lgp Vpat Foldable Blade Capacity	5.06 cu yd
Lgp Vpat Foldable Blade Width	13.39 ft (4.08 m)
Xl Su - Blade Capacity	5.6 cu yd
Xl Su - Blade Width	10.35 ft (3.15 m)
Xl Su - Narrow* Blade Width	9.84 ft (3.00 m)
Xl Vpat - Blade Capacity	4.33 cu yd
Xl Vpat - Blade Width	10.73 ft (3.27 m)

Engine

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Engine specifications
Bore	4.20 in (10.67 cm)
Displacement	402.80 cu in (6,600.72 cu cm)
Emissions	U.S. Tier 4 Interim, EU Stage IIIB, Japan 2011 (Tier 4 Interim)
Engine Model	Cat C6.6 ACERT
Engine Power - Iso 14396	173.00 hp (129.01 kw)
Engine Power - Iso 14396 (Din)	175.30 hp (130.72 kw)
Engine Speed - 1,850 Rpm - Net Power	156.60 hp (116.78 kw)
Flywheel Power	150.00 hp (111.86 kw)
Gross Power - Sae J1995	177.00 hp (131.99 kw)
Net Power - Eu 80/1269 Eec	150.00 hp (111.86 kw)
Net Power - Iso 9249	150.00 hp (111.86 kw)
Net Power - Iso 9249 (Din)	152.00 hp (113.35 kw)
Net Power - Sae J1349	148.00 hp (110.37 kw)
Stroke	5.00 in (12.70 cm)

Operational

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Operational specifications
Operating Weight	36,392.00 lbs (16,507.15 kg)

Ripper

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Ripper specifications
Beam Cross Section	216 mm 254 mm (8.5 in 10.0 in)
Each Additional Shank	172.00 lbs (78.02 kg)
Maximum Clearance Raised - Shank Tip	24.50 in (62.23 cm)
Maximum Penetration - Lgp	15.60 in (39.62 cm)
Maximum Penetration - Xl	20.20 in (51.31 cm)
Maximum Penetration Force - Lgp	9,667.00 lbs ft (13,106.52 nm)
Maximum Penetration Force - Xl	11,600.00 lbs ft (15,727.28 nm)
Maximum Pry-Out Force - Lgp	38,217.00 lbs ft (51,814.61 nm)
Maximum Pry-Out Force - Xl	47,480.00 lbs ft (64,373.39 nm)
Number Of Pockets	3
Number Of Pockets In Ripper Beam	3
Overall Beam Width	86.70 in (220.22 cm)
Pocket Spacing	3.30 ft (1.01 m)
Ripper Type	Fixed Parallelogram
Shank Gauge	6.60 ft (2.01 m)
Shank Section	73 mm 176 mm (2.9 in 6.9 in)
Weight - With Three Shanks	3,444.00 lbs (1,562.17 kg)

Service Refill Capacities

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Service Refill Capacities specifications
Cooling System	10.60 gal (40.12 l)
Final Drive - Each	2.30 gal (8.71 l)
Fuel Tank	79.00 gal (299.02 l)
Hydraulic Tank	7.80 gal (29.52 l)

Standards

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Standards specifications
Brakes	Brakes meet the standard ISO 10265:2008
Fops	Meets ISO 3449-2005 Level II and DLV criteria SAE J397B-2009, ISO 3164:1995.
Rops	Meets ROPS criteria SAE J1040-1994, ISO 3471:2008 and DLV criteria SAE J397B-2009, ISO 3164:1995.

Sustainability - Sound And Vibration Levels

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Sustainability - Sound And Vibration Levels specifications
Note	*Values are for an experienced operator in a dozing application; consult the Operating and Maintenance Manual for details.
Sound Levels - Average Exterior Sound Pressure Level	83 dB(A) (SAE J88:2006)
Sound Levels - Dynamic Operator Sound Pressure Level (Lpa)	78 dB(A) (ISO 6396:2008)
Sound Levels - Maximum Sound Power Level	110 dB(A) (2000/14/EC)
Vibration Levels - Maximum Hand/Arm*	2.5 m/s2 (ISO 5349:2001)
Vibration Levels - Maximum Whole Body*	0.5 m/s2 (ISO/TR25398:2006)
Vibration Levels - Seat Transmissibility Factor	<0.7 (ISO 7096:2000 - spectral class EM6)

Transmission

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Transmission specifications
1.5 Forward	2.00 mph (3.22 kph)
1.5 Forward - Drawbar Pull	71,939.00 lbs (32,631.02 kg)
1.5 Reverse	2.00 mph (3.22 kph)
2.0 Forward	2.90 mph (4.67 kph)
2.0 Reverse	3.20 mph (5.15 kph)
2.5 Forward	3.60 mph (5.79 kph)
2.5 Forward* - Drawbar Pull	39,341.60 lbs (17,845.07 kg)
2.5 Reverse*	4.00 mph (6.44 kph)
3.0 Forward	4.70 mph (7.56 kph)
3.0 Reverse*	5.30 mph (8.53 kph)
3.5 Forward	6.30 mph (10.14 kph)
3.5 Forward* - Drawbar Pull	21,806.50 lbs (9,891.27 kg)
3.5 Reverse*	7.30 mph (11.75 kph)

Undercarriage

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Undercarriage specifications
Ground Contact Area - Lgp	8107 in2
Ground Contact Area - Xl	4929 in2
Ground Pressure* - Lgp	4.41 psi
Ground Pressure* - Xl	6.55 psi
Grouser Height - Lgp	2.21 in (5.61 cm)
Grouser Height - Xl	2.60 in (6.60 cm)
Note	*ISO 16754
Shoes/Side - Lgp	46
Shoes/Side - Xl	40
Track Gauge - Lgp	85.03 in (215.98 cm)
Track Gauge - Xl	74.41 in (189.00 cm)
Track On Ground - Lgp	122.56 in (311.30 cm)
Track On Ground - Xl	102.80 in (261.11 cm)
Track Rollers/Side - Lgp	8
Track Rollers/Side - Xl	7
Width - Shoe - Lgp	33.07 in (84.00 cm)
Width - Shoe - Xl	24.01 in (60.99 cm)

Weights

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Weights specifications
Lgp Vpat - Blade	2,720.00 lbs (1,233.77 kg)
Lgp Vpat - Foldable	3,287.00 lbs (1,490.96 kg)
Lgp Vpat - Landfill	3,166.00 lbs (1,436.08 kg)
Multi-Shank Ripper - With 3 Shanks	3,444.00 lbs (1,562.17 kg)
Operating Weight - Lgp	39,895.00 lbs (18,096.09 kg)
Operating Weight - Xl	36,392.00 lbs (16,507.15 kg)
Shipping Weight - Lgp	38,788.00 lbs (17,593.96 kg)
Shipping Weight - Xl	35,602.00 lbs (16,148.82 kg)
Winch Pa55	See value and note, next page
Xl Su - Blade	5,732.00 lbs (2,599.99 kg)
Xl Vpat Blade	2,341.00 lbs (1,061.86 kg)
Xl Vpat Foldable	2,762.00 lbs (1,252.82 kg)
Xl Vpat Landfill	2,912.00 lbs (1,320.86 kg)

Winch

Caterpillar D6N Tier 4 Interim/Stage IIIB Crawler Dozer Winch specifications
Cable Ferrule Size - O.D. Length	54 mm 67 mm (2.13 in 2.63 in)
Control	Electric
Drum Capacity - 22 Mm (0.88 In)	288.80 ft (88.03 m)
Drum Diameter	10.00 in (25.40 cm)
Drum Width	12.40 in (31.50 cm)
Flange Diameter	19.80 in (50.29 cm)
Maximum Bare Drum - Line Pull	69,200.00 lbs (31,388.63 kg)
Maximum Bare Drum - Line Speed	147 ft/min
Maximum Full Drum - Line Pull	54,100.00 lbs (24,539.38 kg)
Maximum Full Drum - Line Speed	257 ft/min
Note	* Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Oil Capacity	19.60 gal (74.19 l)
Overall Width	38.40 in (97.54 cm)
Rope Diameter - Recommended	0.80 in (2.03 cm)
Weight*	2,814.00 lbs (1,276.41 kg)
Winch And Bracket Length	45.10 in (114.55 cm)
Winch Case - Width	38.40 in (97.54 cm)
Winch Drive	Mechanical
Winch Model	PA55

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon