Caterpillar D6N WH Crawler Dozer Specs

Category: Crawler Dozers ➔
Manufacturer: Caterpillar ➔
Model: D6N WH ➔

Blades - Capacity (Sae J1265)

Caterpillar D6N WH Crawler Dozer Blades - Capacity (Sae J1265) specifications
Lgp Vpat	5.1 cu yd
Lgp Vpat - Landfill*	7.4 cu yd
Note	*Blade capacity with trash rack.
Xl Su	5.6 cu yd
Xl Vpat	4.3 cu yd
Xl Vpat Landfill*	8.3 cu yd

Blades - Width - Over End Bits

Caterpillar D6N WH Crawler Dozer Blades - Width - Over End Bits specifications
Lgp Vpat	13.40 ft (4.08 m)
Lgp Vpat - Landfill*	12.90 ft (3.93 m)
Note	*Blade capacity with trash rack.
Xl Su	10.40 ft (3.17 m)
Xl Vpat	10.80 ft (3.29 m)
Xl Vpat Landfill*	10.30 ft (3.14 m)

Dimensions - Lgp

Caterpillar D6N WH Crawler Dozer Dimensions - Lgp specifications
Ground Clearance	18.80 in (47.75 cm)
Height - Grouser	2.21 in (5.61 cm)
Length - Basic Tractor - With Drawbar*	166.20 in (422.15 cm)
Length - Track On Ground	122.70 in (311.66 cm)
Machine Height - Grouser Tip - Exhaust Stack	126.90 in (322.33 cm)
Note	*Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
Track Gauge	85.00 in (215.90 cm)
Width - Tractor - Without Trunnions	118.00 in (299.72 cm)

Dimensions - Xl

Caterpillar D6N WH Crawler Dozer Dimensions - Xl specifications
Ground Clearance	14.30 in (36.32 cm)
Height - Grouser	2.60 in (6.60 cm)
Length - Basic Tractor - With Drawbar*	157.31 in (399.57 cm)
Length - Track On Ground	101.60 in (258.06 cm)
Machine Height - Grouser Tip - Exhaust Stack	122.40 in (310.90 cm)
Note	*Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
Track Gauge	74.41 in (189.00 cm)
Width - Tractor - Without Trunnions	98.40 in (249.94 cm)

Engine

Caterpillar D6N WH Crawler Dozer Engine specifications
Bore	4.10 in (10.41 cm)
Displacement	433.00 cu in (7,095.61 cu cm)
Emissions	Tier 4 Final/Stage IV/Korea Tier 4 Final
Engine Model	Cat C7.1 ACERT
Flywheel Power	182.00 hp (135.72 kw)
Net Power - 1,800 Rpm - Iso 9249/Sae J1349	166.00 hp (123.79 kw)
Net Power - 1,800 Rpm - Iso 9249/Sae J1349 (Din)	168.00 hp (125.28 kw)
Net Power - Maximum - Iso 14396 (Din) At 2,200 Rpm	180.00 hp (134.23 kw)
Net Power - Maximum - Iso 14396 At 2,200 Rpm	178.00 hp (132.74 kw)
Net Power - Maximum - Sae J1995 At 2,200 Rpm	182.00 hp (135.72 kw)
Note (1)	All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and A
Note (2)	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Stroke	5.30 in (13.46 cm)

Operational

Caterpillar D6N WH Crawler Dozer Operational specifications
Operating Weight	40,818.00 lbs (18,514.76 kg)

Transmission

Caterpillar D6N WH Crawler Dozer Transmission specifications
0.5 Forward	1.60 mph (2.57 kph)
0.5 Reverse	1.90 mph (3.06 kph)
0.7 Forward	1.70 mph (2.74 kph)
0.7 Reverse	2.10 mph (3.38 kph)
1.0 Forward	2.10 mph (3.38 kph)
1.0 Reverse	2.50 mph (4.02 kph)
1.5 Forward	2.70 mph (4.35 kph)
1.5 Reverse	3.40 mph (5.47 kph)
1.7 Forward	3.00 mph (4.83 kph)
1.7 Reverse	3.70 mph (5.95 kph)
2.0 Forward	3.60 mph (5.79 kph)
2.0 Reverse	4.40 mph (7.08 kph)
2.5 Forward	4.70 mph (7.56 kph)
2.5 Reverse	5.90 mph (9.50 kph)
2.7 Forward	5.20 mph (8.37 kph)
2.7 Reverse	6.50 mph (10.46 kph)
3.0 Forward	6.10 mph (9.82 kph)
3.0 Reverse	7.60 mph (12.23 kph)

Undercarriage

Caterpillar D6N WH Crawler Dozer Undercarriage specifications
Ground Pressure	4.5 psi

Weights

Caterpillar D6N WH Crawler Dozer Weights specifications
Operating Weight - Lgp Waste Handler	44,749.00 lbs (20,297.83 kg)
Operating Weight - Xl Waste Handler	40,818.00 lbs (18,514.76 kg)
Shipping Weight - Lgp Waste Handler	43,642.00 lbs (19,795.70 kg)
Shipping Weight - Xl Waste Handler	40,029.00 lbs (18,156.87 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon