Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D6N is a mid-size crawler dozer designed for grading, dozing, site preparation, and general earthmoving applications. It is part of Caterpillar's D6 series and is commonly used in construction, roadbuilding, land clearing, and utility work. The D6N features a tracked undercarriage for traction and stability on uneven terrain, with a blade system suited to pushing, leveling, and backfilling material. Available with different blade and undercarriage configurations, the model is used in both production and finish grading tasks. Caterpillar D6N crawler dozers are known for balanced performance, operator control, and versatility across demanding jobsite conditions.
| (1000 psi) | @ 2300 RPM - Starting 2012 |
|---|---|
| 3 Valves | 59.50 lbs (27.00 kg) - Starting 2012 |
| 4 Valve | 703.00 lbs (314.00 kg) - Starting 2010 |
| 4 Valves | 70.50 lbs (32.00 kg) - Starting 2012 |
| Flow at 6890 kPa | 35.00 US gpm (132.50 L/min) - Starting 2016 |
| Flow at 6890 kPa - (1000 psi) | 32.00 US gpm (121.00 L/min) - Starting 2006 |
| Lift Relief Valve - Setting XL & LGP | 3,600.00 psi (25,000.00 kPa) - Starting 2006 |
| Lift Relief Valve Setting - XL and LGP | 3,600.00 psi (25,000.00 kPa) - Starting 2010 |
| Mounting Point | Right Rear Fender - Starting 2006 |
| Number of Valves | 3 or 4 - Starting 2006 |
| Reverse Speed - Gear 1 | 1.90 mph (3.10 km/h) - Starting 2012 |
| Reverse Speed - Gear 2 | 4.00 mph (6.40 km/h) - Starting 2012 |
| Reverse Speed - Gear 3 | 7.20 mph (11.60 km/h) - Starting 2012 |
| Speed - Gear 1 | 1.90 mph (3.10 km/h) - Starting 2012 |
| Speed - Gear 2 | 3.50 mph (5.70 km/h) - Starting 2012 |
| Speed - Gear 3 | 6.20 mph (10.00 km/h) - Starting 2012 |
| Tank Capacity (Oil) | 7.80 US gal (29.50 L) - Starting 2006 |
| Travel Speed - Forward - Gear 0.5 [Power Shift AutoShift; Sound Suppressed] | 1.50 mph (2.40 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 0.5 [Power Shift AutoShift] | 1.60 mph (2.50 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 0.7 [Power Shift AutoShift; Sound Suppressed] | 1.60 mph (2.70 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 0.7 [Power Shift AutoShift] | 1.70 mph (2.80 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 1.0 [Power Shift AutoShift; Sound Suppressed] | 1.90 mph (3.00 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 1.0 [Power Shift AutoShift] | 2.10 mph (3.30 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 1.5 [Power Shift AutoShift] | 2.70 mph (4.40 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 1.7 [Power Shift AutoShift] | 3.00 mph (4.90 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 2.0 [Power Shift AutoShift] | 3.60 mph (5.80 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 2.5 [Power Shift AutoShift] | 4.70 mph (7.50 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 2.7 [Power Shift AutoShift] | 5.20 mph (8.30 km/h) - Starting 2019 |
| Travel Speed - Forward - Gear 3.0 [Power Shift AutoShift] | 6.10 mph (9.80 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 0.5 [Power Shift AutoShift; Sound Suppressed] | 1.80 mph (2.90 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 0.5 [Power Shift AutoShift] | 1.90 mph (3.10 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 0.7 [Power Shift AutoShift; Sound Suppressed] | 1.90 mph (3.10 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 0.7 [Power Shift AutoShift] | 2.10 mph (3.40 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 1.0 [Power Shift AutoShift; Sound Suppressed] | 2.20 mph (3.50 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 1.0 [Power Shift AutoShift] | 2.50 mph (4.10 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 1.5 [Power Shift AutoShift] | 3.40 mph (5.40 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 1.7 [Power Shift AutoShift] | 3.70 mph (6.00 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 2.0 [Power Shift AutoShift] | 4.40 mph (7.10 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 2.5 [Power Shift AutoShift] | 5.90 mph (9.50 km/h) - Starting 2019 |
| Travel Speed - Reverse - Gear 2.7 [Power Shift AutoShift] | 6.50 mph (10.50 km/h) - Starting 2019 |
| Weight Installed: 3 Valve | 650.00 lbs (295.00 kg) - Starting 2006 |
| Weight Installed: 4 Valve | 703.00 lbs (314.00 kg) - Starting 2006 |
| XL and LGP Weight Installed | 3,989.00 psi (27,500.00 kPa) - Starting 2012 |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
|---|
| Capacity - Lgp Vpat | 5.1 cu yd |
|---|---|
| Capacity - Lgp Vpat - Foldable | 5.1 cu yd |
| Capacity - Xl Su | 5.6 cu yd |
| Capacity - Xl Vpat | 4.3 cu yd |
| Width - Lgp Vpat | 13.42 ft (4.09 m) |
| Width - Lgp Vpat - Foldable | 13.42 ft (4.09 m) |
| Width - Xl Su | 10.33 ft (3.15 m) |
| Width - Xl Vpat | 10.75 ft (3.28 m) |
| Ground Clearance | 1.40 ft (0.43 m) |
|---|---|
| Height | 10.08 ft (3.07 m) |
| Height To Top Of Cab | 10.12 ft (3.08 m) |
| Length | 15.00 ft (4.57 m) |
| Length Of Track On Ground | 8.37 ft (2.55 m) |
| Weight | 35,000.00 lbs (15,875.75 kg) |
| Width | 8.17 ft (2.49 m) |
| Width Over Tracks | 8.18 ft (2.49 m) |
| Bore | 4.10 in (10.41 cm) |
|---|---|
| Displacement | 433.00 cu in (7,095.61 cu cm) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final |
| Engine Make | 2236 |
| Engine Model | Cat C7.1 ACERT |
| Engine Power - Maximum - At 2,200 Rpm - Iso 14396 | 178.00 hp (132.74 kw) |
| Engine Power - Maximum - At 2,200 Rpm - Iso 14396 (Din) | 180.00 hp (134.23 kw) |
| Engine Power - Maximum - At 2,200 Rpm - Sae J1995 | 182.00 hp (135.72 kw) |
| Flywheel Power | 166.00 hp (123.79 kw) |
| Net Power | 145.00 hp (108.13 kw) |
| Net Power - 1,800 Rpm - Iso 9249/Sae J1349 | 166.00 hp (123.79 kw) |
| Net Power - 1,800 Rpm - Iso 9249/Sae J1349 (Din) | 168.00 hp (125.28 kw) |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed. |
| Note (2) | No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs. |
| Note (3) | All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, AP |
| Note (4) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Stroke | 5.30 in (13.46 cm) |
| Maximum Implement Operating Pressure | 3640 psi |
|---|---|
| Maximum Steering Operating Pressure | 6556 psi |
| Angle Cylinder Flow - Vpat | 33.50 gpm (126.80 lpm) |
|---|---|
| Lift Cylinder Flow | 33.50 gpm (126.80 lpm) |
| Pump Output - Implement | 33.50 gpm (126.80 lpm) |
| Pump Output - Steering | 36.20 gpm (137.02 lpm) |
| Ripper Cylinder Flow | 33.50 gpm (126.80 lpm) |
| Tilt Cylinder Flow | 23.80 gpm (90.08 lpm) |
| Cooling System Fluid Capacity | 10.80 gal (40.88 l) |
|---|---|
| Final Drives Fluid Capacity | 1.90 gal (7.19 l) |
| Fuel Capacity | 79.00 gal (299.02 l) |
| Hydraulic Fluid Capacity | 7.80 gal (29.52 l) |
| Operating Weight | 34,361.00 lbs (15,585.91 kg) |
| Beam Cross Section | 216 mm 254 mm (8.5 in 10.0 in) |
|---|---|
| Each Additional Shank | 172.00 lbs (78.02 kg) |
| Maximum Clearance Raised - Shank Tip | 24.50 in (62.23 cm) |
| Maximum Penetration - Lgp | 15.60 in (39.62 cm) |
| Maximum Penetration - Xl | 20.20 in (51.31 cm) |
| Maximum Penetration Force - Lgp | 9,667.00 lbs ft (13,106.52 nm) |
| Maximum Penetration Force - Xl | 11,600.00 lbs ft (15,727.28 nm) |
| Maximum Pry-Out Force - Lgp | 38,217.00 lbs ft (51,814.61 nm) |
| Maximum Pry-Out Force - Xl | 47,480.00 lbs ft (64,373.39 nm) |
| Number Of Pockets | 3 |
| Overall Beam Width | 86.70 in (220.22 cm) |
| Pocket Spacing | 3.30 ft (1.01 m) |
| Ripper Type | Fixed Parallelogram |
| Shank Gauge | 6.60 ft (2.01 m) |
| Shank Section | 73 mm 176 mm (2.9 in 6.9 in) |
| Weight - With Three Shanks | 3,444.00 lbs (1,562.17 kg) |
| Cooling System | 10.60 gal (40.12 l) |
|---|---|
| Def Tank | 5.00 gal (18.93 l) |
| Engine Crankcase | 4.50 gal (17.03 l) |
| Final Drive - Each | 1.80 gal (6.81 l) |
| Fuel Tank | 73.20 gal (277.06 l) |
| Hydraulic Tank | 7.80 gal (29.52 l) |
| Power Train | 42.30 gal (160.11 l) |
| Roller Frames Xl/Lgp - Each | 20/17.5 L (4.3/4.6 gal) |
| Sound Level Information (1) | The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when ANSI/SAE J1166 FEB2008 is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. |
|---|---|
| Sound Level Information (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment. |
| Sound Level Information (3) | The average exterior sound pressure level is 85.5 dB(A) when the SAE J88 FEB2006 Constant Speed Moving Test procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and the machine moving forward in an intermediate gear ratio. |
| Specification Name Too Long | If equipped, the certification label 110 dB(A) is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in 2000/14/EC. Your machine may have a different value. |
| Capacity | 4.2 cu yd |
|---|---|
| Cutting Depth | 21.20 in (53.85 cm) |
| Height | 47.10 in (119.63 cm) |
| Width | 10.80 ft (3.29 m) |
| Brakes | Brakes meet the standard ISO 10265:2008. |
|---|---|
| Fops | FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II. |
| Rops | ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008. |
| Note | *Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details. |
|---|---|
| Sound Levels - Average Exterior Sound Pressure Level - Sae J88:2006 | 85.5 dB(A) |
| Sound Levels - Dynamic Operator Sound Pressure Level (Lpa) - Iso 6396:2008 | 76 dB(A) |
| Sound Levels - Maximum Sound Power Level - 2000/14/Ec | 110 dB(A) |
| Vibration Levels - Maximum Hand/Arm* - Iso 5349:2001 | 2.5 m/s2 (8.2 ft/s2) |
| Vibration Levels - Maximum Whole Body* - Iso/Tr25398:2006 | 0.5 m/s2 (1.6 ft/s2) |
| Vibration Levels - Seat Transmissibility Factor - Iso 7096:2000 - Spectral Class Em6 | Less Than 0.7 |
| 0.5 Forward | 1.60 mph (2.57 kph) |
|---|---|
| 0.5 Forward (Eu) | 1.50 mph (2.41 kph) |
| 0.5 Reverse | 1.90 mph (3.06 kph) |
| 0.5 Reverse (Eu) | 1.80 mph (2.90 kph) |
| 0.7 Forward | 1.70 mph (2.74 kph) |
| 0.7 Forward (Eu) | 1.60 mph (2.57 kph) |
| 0.7 Reverse | 2.10 mph (3.38 kph) |
| 0.7 Reverse (Eu) | 1.90 mph (3.06 kph) |
| 1.0 Forward | 2.10 mph (3.38 kph) |
| 1.0 Forward (Eu) | 1.90 mph (3.06 kph) |
| 1.0 Reverse | 2.50 mph (4.02 kph) |
| 1.0 Reverse (Eu) | 2.20 mph (3.54 kph) |
| 1.5 Forward | 2.70 mph (4.35 kph) |
| 1.5 Reverse | 3.40 mph (5.47 kph) |
| 1.7 Forward | 3.00 mph (4.83 kph) |
| 1.7 Reverse | 3.70 mph (5.95 kph) |
| 2.0 Forward | 3.60 mph (5.79 kph) |
| 2.0 Reverse | 4.40 mph (7.08 kph) |
| 2.5 Forward | 4.70 mph (7.56 kph) |
| 2.5 Reverse | 5.90 mph (9.50 kph) |
| 2.7 Forward | 5.20 mph (8.37 kph) |
| 2.7 Reverse | 6.50 mph (10.46 kph) |
| 3.0 Forward | 6.10 mph (9.82 kph) |
| 3.0 Reverse | 7.60 mph (12.23 kph) |
| Max Speed - Forward | 6.30 mph (10.14 kph) |
| Max Speed - Reverse | 7.40 mph (11.91 kph) |
| Maximum Drawbar Pull - 1.0 Forward | 71,939.00 lbs ft (97,534.90 nm) |
| Maximum Drawbar Pull - 2.0 Forward | 44,512.00 lbs ft (60,349.37 nm) |
| Maximum Drawbar Pull - 3.0 Forward | 25,403.00 lbs ft (34,441.39 nm) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Ground Contact Area | 4822 in2 |
|---|---|
| Ground Contact Area* - Lgp | 8928 in2 |
| Ground Contact Area* - Xl | 5518 in2 |
| Ground Contact Area* - Xl - Fine Grading | 6479 in2 |
| Ground Pressure | 7.24 psi |
| Ground Pressure - Lgp* | 4.5 psi |
| Ground Pressure - Xl* | 6.7 psi |
| Ground Pressure* - Xl - Fine Grading | 5.8 psi |
| Grouser Height - Lgp | 2.21 in (5.61 cm) |
| Grouser Height - Xl | 2.60 in (6.60 cm) |
| Grouser Height - Xl - Fine Grading | 2.60 in (6.60 cm) |
| Note (1) | *ISO 16754 |
| Note (2) | All dimensions with SystemOne undercarriage. |
| Number Of Shoes Per Side | 40 |
| Number Of Track Rollers Per Side | 7 |
| Shoe Width - Lgp | 33.10 in (84.07 cm) |
| Shoe Width - Xl | 24.00 in (60.96 cm) |
| Shoe Width - Xl - Fine Grading | 24.00 in (60.96 cm) |
| Shoes/Side - Lgp | 46 |
| Shoes/Side - Xl | 40 |
| Shoes/Side - Xl - Fine Grading | 46 |
| Track Gauge | 6.21 ft (1.89 m) |
| Track Gauge - Lgp | 85.00 in (215.90 cm) |
| Track Gauge - Xl | 74.41 in (189.00 cm) |
| Track Gauge - Xl - Fine Grading | 74.41 in (189.00 cm) |
| Track On Ground - Lgp | 122.40 in (310.90 cm) |
| Track On Ground - Xl | 102.60 in (260.60 cm) |
| Track On Ground - Xl - Fine Grading | 122.40 in (310.90 cm) |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 7 |
| Track Rollers/Side - Xl - Fine Grading | 8 |
| Lgp Vpat - Blade | 2,720.00 lbs (1,233.77 kg) |
|---|---|
| Lgp Vpat - Foldable | 3,287.00 lbs (1,490.96 kg) |
| Lgp Vpat - Landfill | 3,166.00 lbs (1,436.08 kg) |
| Multi-Shank Ripper - With 3 Shanks | 2,959.00 lbs (1,342.18 kg) |
| Note (1) | Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator. |
| Note (2) | Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat. |
| Operating Weight | 36,943.00 lbs (16,757.08 kg) |
| Operating Weight - Lgp | 40,446.00 lbs (18,346.02 kg) |
| Operating Weight - Lgp Waste Handler | 44,749.00 lbs (20,297.83 kg) |
| Operating Weight - Xl | 36,943.00 lbs (16,757.08 kg) |
| Operating Weight - Xl Fine Grading | 38,162.00 lbs (17,310.01 kg) |
| Operating Weight - Xl Waste Handler | 40,818.00 lbs (18,514.76 kg) |
| Shipping Weight - Lgp | 39,339.00 lbs (17,843.89 kg) |
| Shipping Weight - Lgp Waste Handler | 43,642.00 lbs (19,795.70 kg) |
| Shipping Weight - Xl | 36,153.00 lbs (16,398.75 kg) |
| Shipping Weight - Xl Fine Grading | 37,373.00 lbs (16,952.13 kg) |
| Shipping Weight - Xl Waste Handler | 40,029.00 lbs (18,156.87 kg) |
| Xl Su - Blade | 5,732.00 lbs (2,599.99 kg) |
| Xl Vpat Blade | 2,341.00 lbs (1,061.86 kg) |
| Xl Vpat Foldable | 2,762.00 lbs (1,252.82 kg) |
| Xl Vpat Landfill | 2,912.00 lbs (1,320.86 kg) |
| Cable Ferrule Size - O.D. Length | 54 mm 67 mm (2.13 in 2.63 in) |
|---|---|
| Control | Electric |
| Drum Capacity - 22 Mm (0.88 In) | 288.80 ft (88.03 m) |
| Drum Diameter | 10.00 in (25.40 cm) |
| Drum Width | 12.40 in (31.50 cm) |
| Flange Diameter | 19.80 in (50.29 cm) |
| Maximum Bare Drum - Line Pull* | 69,200.00 lbs (31,388.63 kg) |
| Maximum Bare Drum - Line Speed | 141 ft/min |
| Maximum Full Drum - Line Pull* | 44,410.00 lbs (20,144.06 kg) |
| Maximum Full Drum - Line Speed | 217 ft/min |
| Note (1) | *Weight: Includes pump, operator controls, oil, mounting brackets and spacers. |
| Note (2) | Slow and standard speed winches are available. |
| Oil Capacity | 19.60 gal (74.19 l) |
| Overall Width | 38.40 in (97.54 cm) |
| Rope Diameter - Recommended | 0.90 in (2.29 cm) |
| Weight* | 2,814.00 lbs (1,276.41 kg) |
| Winch And Bracket Length | 45.10 in (114.55 cm) |
| Winch Case - Width | 38.40 in (97.54 cm) |
| Winch Drive | Mechanical |
| Winch Model | PA55 |