Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D6R2 XL is a crawler dozer in Caterpillar's D6R series, configured with an extended track gauge and XL undercarriage for improved stability and traction in grading, pushing, and site preparation work. It is commonly used in construction, land clearing, road building, and general earthmoving applications. The D6R2 XL typically features a diesel engine, hydrostatic or powershift drivetrain depending on configuration, and a blade designed for efficient material handling. As a mid-size crawler dozer, it is valued for balance between maneuverability, drawbar power, and operating efficiency in demanding off-road conditions.
| Blade Types and Widths - Angle Blade | 164.00 in (4,166.00 mm) - Starting 2016 |
|---|---|
| Blade Types and Widths - SU Blade | 128.30 in (3,260.00 mm) - Starting 2016 |
| Bore | 4.40 in (112.00 mm) - Starting 2016 |
| Displacement | 537.00 cu in (8.80 L) - Starting 2016 |
| Each additional shank | 160.00 lbs (73.00 kg) - Starting 2016 |
| Emission Standards | Tier 3/Stage IIIA/ Japan 2006 (Tier 3) equivalent - Starting 2016 |
| Engine Model | C9 ACERT - Starting 2016 |
| Flywheel Power - Stage II - ISO 9249/SAE J1349 | 198.00 hp (148.00 kW) - Starting 2016 |
| Flywheel Power - Stage IIIA - ISO 9249/SAE J1349 | 206.00 hp (153.00 kW) - Starting 2016 |
| Fuel Tank Refill Capacity | 112.00 US gal (424.00 L) - Starting 2016 |
| G Maximum digging depth | 20.00 in (495.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Ground Clearance | 14.60 in (372.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Height (To Exhaust Stack) | 122.60 in (3,115.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Height (To Top of ROPS Cab/Canopy) | 126.60 in (3,216.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Length of Basic Tractor (w/o Blade) | 152.00 in (3,860.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Width of Tractor - Over Trunnion | 103.90 in (2,640.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - Width of Tractor - Without Trunnion - (standard shoe width) | 96.10 in (2,440.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - with following attachments, add - Angle Blade (when Angled 25°) | 86.00 in (2,185.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - with following attachments, add - Angle Blade (when Straight) | 53.10 in (1,349.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - with following attachments, add - Muiti-Shank Ripper - (tip at ground level) | 55.20 in (1,403.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - with following attachments, add - Multi-Shank Ripper - (tip at ground level) | 55.20 in (1,403.00 mm) - Starting 2019 |
| GENERAL DIMENSIONS - with following attachments, add - Rear Drawbar | 14.40 in (366.00 mm) - Starting 2016 |
| GENERAL DIMENSIONS - with following attachments, add - SU Blade | 58.00 in (1,472.00 mm) - Starting 2016 |
| Ground Contact Area | 5,429.00 sq in (3.50 sq m) - Starting 2019 |
| Ground Contact Area (w/Std. Shoe) | 4,984.00 sq in (3.22 sq m) - Starting 2016 |
| Ground Pressure | 8.08 psi (55.72 kPa) - Starting 2019 |
| Installed weights - Each additional shank | 160.00 lbs (73.00 kg) - Starting 2017 |
| Installed weights - Ripper with standard shank | 3,324.00 lbs (1,508.00 kg) - Starting 2017 |
| L Maximum reach at ground line | 29.00 in (733.00 mm) - Starting 2016 |
| Length of Track on Ground | 113.00 in (2,871.00 mm) - Starting 2016 |
| M Maximum ground clearance under tip (shank pinned in bottom hole) | 20.00 in (518.00 mm) - Starting 2016 |
| M Maximum ground clearance under tip - (shank pinned in bottom hole) | 20.00 in (518.00 mm) - Starting 2017 |
| N Maximum ramp angle, ripper up (shank pinned in bottom hole) | 26 deg - Starting 2016 |
| N Maximum ramp angle, ripper up - (shank pinned in bottom hole) | 26 deg - Starting 2017 |
| N Maximum ramp angle, ripper up - Shank section | 2.9" x 6.9 in (74 x 175 mm) - Starting 2016 |
| No. of Cylinders | 6 - Starting 2016 |
| Number of Pockets | 3 - Starting 2016 |
| O Overall width | 87.00 in (2.20 m) - Starting 2016 |
| Operating Weight: 2 - Power Shift Differential Steer (SU Blade) | 43,903.00 lbs (19,914.00 kg) - Starting 2016 |
| P Height | 8.50 in (216.00 mm) - Starting 2016 |
| Q Length | 10.00 in (254.00 mm) - Starting 2016 |
| Rated Engine RPM - Stage II | 2000 rpm - Starting 2016 |
| Rated Engine RPM - Stage IIIA | 1850 rpm - Starting 2016 |
| Ripper Beam O Overall width | 87.00 in (2.20 m) - Starting 2017 |
| Ripper Forces - Penetration Force | 14,747.00 lbf (65.60 kN) - Starting 2016 |
| Ripper Forces - Pryout Force | 20,140.00 lbf (116.50 kN) - Starting 2016 |
| Ripper Shank G Maximum digging depth | 20.00 in (495.00 mm) - Starting 2017 |
| Ripper Type | Parallelogram - Starting 2016 |
| Ripper with standard shank | 3,324.00 lbs (1,508.00 kg) - Starting 2016 |
| Shank Section | 2.9 x 6.9 in (74 x 175 mm) - Starting 2019 |
| Stroke | 5.90 in (149.00 mm) - Starting 2016 |
| T Pocket Spacing | 39.00 in (1,000.00 mm) - Starting 2016 |
| Track Gauge | 74.00 in (1,880.00 mm) - Starting 2016 |
| Track Rollers (Each Side) | 7 - Starting 2016 |
| Track Shoe Width | 24.00 in (610.00 mm) - Starting 2019 |
| U Shank Gauge | 79.00 in (2.00 m) - Starting 2016 |
| V Track clearance with standard shoe | 2.70 in (69.00 mm) - Starting 2016 |
| Width of Standard Track Shoe | 22.00 in (560.00 mm) - Starting 2016 |