Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Specs

Category: Crawler Dozers ➔
Manufacturer: Caterpillar ➔
Model: D7E WH (Tier 4 Interim/Stage IIIB) ➔

Bulldozer

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Bulldozer specifications
Blade	7S LGP
Blade Capacity - Sae J1265*	16.11 cu yd
Digging Depth	25.40 in (64.52 cm)
Ground Clearance	49.80 in (126.49 cm)
Height	4.41 ft (1.34 m)
Maximum Tilt	30.90 in (78.49 cm)
Note (1)	*Capacities calculated with a trash rack installed.
Note (2)	**Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, and cylinder lines (Tilt).
Weight**	8,492.00 lbs (3,851.91 kg)
Width - Over End Bits	14.91 ft (4.54 m)

Drive Train

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Drive Train specifications
Ac Compressor Maximum Input Current	12 A
Ac Compressor Nominal Input Voltage	320 V
Ac Generator And Propulsion Module Voltage	480 V
Drive Train Type	Electric Drive
Electric Water Pump System Nominal Input Current	5 A
Electric Water Pump System Nominal Input Voltage	320 V

Engine

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Engine specifications
Bore	4.50 in (11.43 cm)
Displacement	567.00 cu in (9,291.49 cu cm)
Engine Model	Cat C9.3 ACERT
Flywheel Power	235.00 hp (175.24 kw)
Global Emissions	U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
Gross Power - Iso 14396	256.00 hp (190.90 kw)
Gross Power - Iso 14396 (Din)	260.00 hp (193.89 kw)
Gross Power - Sae J1995	259.00 hp (193.14 kw)
Net Power - Iso 9249	235.00 hp (175.24 kw)
Net Power - Iso 9249 (Din)	238.00 hp (177.48 kw)
Net Power - Sae J1349	235.00 hp (175.24 kw)
Stroke	5.90 in (14.99 cm)

Hydraulic Controls - Main Relief Valve

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Hydraulic Controls - Main Relief Valve specifications
Pressure Setting - Steering	4000 psi

Hydraulic Controls - Maximum Operating Pressure

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Hydraulic Controls - Maximum Operating Pressure specifications
Bulldozer	4000 psi
Ripper - Lift	4000 psi
Ripper - Pitch	4000 psi
Steering	5950 psi
Tilt Cylinder	4000 psi

Hydraulic Controls - Pump

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Hydraulic Controls - Pump specifications
Lift Cylinder Flow	42.00 gpm (158.97 lpm)
Pump Output - Implement	52.80 gpm (199.85 lpm)
Pump Output - Steering	82.40 gpm (311.88 lpm)
Pump Type	Piston, Variable Displacement
Ripper Cylinder Flow	42.00 gpm (158.97 lpm)
Tilt Cylinder Flow - Head End Flow	24.60 gpm (93.11 lpm)
Tilt Cylinder Flow - Rod End Flow	17.40 gpm (65.86 lpm)

Operational

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Operational specifications
Operating Weight	68,600.00 lbs (31,116.48 kg)

Rippers

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Rippers specifications
Beam Cross Section	14.00 in (35.56 cm)
Maximum Clearance Raised - Under Tip, Pinned In Bottom Hole	23.10 in (58.67 cm)
Maximum Penetration	25.60 in (65.02 cm)
Maximum Penetration Force	19,639.00 lbs (8,908.11 kg)
Number Of Pockets	3
Overall Beam Width	82.20 in (208.79 cm)
Pocket Spacing	35.40 in (89.92 cm)
Pry-Out Force	52,695.00 lbs (23,902.08 kg)
Ramp Angle	26 degrees
Rippers Type	Multi-Shank
Shank Gauge	70.90 in (180.09 cm)
Shank Section	72 mm 228 mm (2.8 in 9.0 in)
Weight - Each Additional Shank	330.00 lbs (149.69 kg)
Weight - With One Shank	3,572.00 lbs (1,620.23 kg)

Service Refill Capacities

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Service Refill Capacities specifications
Cooling System	22.50 gal (85.16 l)
Engine Crankcase	8.00 gal (30.28 l)
Final Drive - Each - Lgp	9.00 gal (34.07 l)
Fuel Tank	108.00 gal (408.78 l)
Pivot Shaft Compartment	1.80 gal (6.81 l)
Power Train	16.00 gal (60.56 l)

Standards

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Standards specifications
Brakes	ISO 10265 2008
Cab	ANSI/SAE J1166 OCT 98
Rops/Fops	ROPS meets criteria ISO 3471:1994, 2008; FOPS meets ISO 3449:1992, 2005 Level II

Weights

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Weights specifications
Operating Weight - Lgp Wha	68,600.00 lbs (31,116.48 kg)
Shipping Weight - Lgp Wha	58,900.00 lbs (26,716.62 kg)

Winches

Caterpillar D7E WH (Tier 4 Interim/Stage IIIB) Crawler Dozer Winches specifications
Drum Capacity - 24 Mm (1 In)	203.00 ft (61.87 m)
Drum Capacity - 29 Mm (1.13 In)	185.00 ft (56.39 m)
Drum Diameter	12.50 in (31.75 cm)
Increased Tractor Length - Lgp	93.90 in (238.51 cm)
Maximum Bare Drum - Line Pull	90,000.00 lbs (40,823.36 kg)
Maximum Bare Drum - Line Speed	70 ft/min
Maximum Full Drum - Line Pull	57,000.00 lbs (25,854.80 kg)
Maximum Full Drum - Line Speed	116 ft/min
Note	*Basic winch weight, mounting arrangement, hydraulic and electrical system weight.
Oil Capacity	3.20 gal (12.11 l)
Weight*	3,350.00 lbs (1,519.54 kg)
Winch Drive	Hydraulic
Winch Model	PA90

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon