Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar D9 is a heavy-duty crawler dozer designed for earthmoving, mining, land clearing, and large-scale construction applications. Built with a tracked undercarriage for traction and stability, the D9 is known for high pushing power, durable frame construction, and compatibility with a range of blades and attachments. Caterpillar has produced multiple D9 variants over time, including older mechanical models and modern electronically controlled versions. The machine is commonly used in demanding off-road conditions where drawbar pull, blade capacity, and serviceability are important. The Caterpillar D9 remains a widely recognized model in the crawler dozer category for heavy production work.
| Blade Capacity | 21.7 yd³ - Starting 2024 |
|---|---|
| Engine | C18 - Starting 2023 |
| Engine Power | 452.00 hp (337.06 kw) - Starting 2024 |
| Engine Type | Cat C18 - Starting 2024 |
| Net Power | 452.00 hp (337.06 kw) - Starting 2024 |
| Operating Weight | 110,225 lb - Starting 2024 |
| Weight | 110,225.00 lbs (49,997.28 kg) - Starting 2024 |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. - Starting 2026 |
|---|
| Blade Capacity (SAE J1265) | 17.8 cu yd - Starting 2026 |
|---|---|
| Blade Height | 76.10 in (193.29 cm) - Starting 2026 |
| Blade Weight | 10,587.00 lbs (4,802.19 kg) - Starting 2026 |
| Blade Width (over end bits) | 171.30 in (435.10 cm) - Starting 2026 |
| Ground Clearance at Full Lift | 56.00 in (142.24 cm) - Starting 2026 |
| Maximum Digging Depth | 23.90 in (60.71 cm) - Starting 2026 |
| Maximum Tilt | 37.00 in (93.98 cm) - Starting 2026 |
| Total Operating Weight* (with blade and single-shank ripper) | 110,205.00 lbs (49,988.21 kg) - Starting 2026 |
| Blade Capacity (SAE J1265) | 21.7 cu yd - Starting 2026 |
|---|---|
| Blade Height | 76.10 in (193.29 cm) - Starting 2026 |
| Blade Weight | 12,016.00 lbs (5,450.37 kg) - Starting 2026 |
| Blade Width (over end bits) | 184.30 in (468.12 cm) - Starting 2026 |
| Ground Clearance at Full Lift | 56.00 in (142.24 cm) - Starting 2026 |
| Maximum Digging Depth | 23.90 in (60.71 cm) - Starting 2026 |
| Maximum Tilt | 39.90 in (101.35 cm) - Starting 2026 |
| Total Operating Weight* (with blade and single-shank ripper) | 111,362.00 lbs (50,513.02 kg) - Starting 2026 |
| Height | 13.17 ft (4.01 m) |
|---|---|
| Length | 26.92 ft (8.20 m) |
| Weight | 110,225.00 lbs (49,997.28 kg) |
| Width | 9.42 ft (2.87 m) |
| Drawbar Height (Center of Clevis)* | 30.00 in (76.20 cm) - Starting 2026 |
|---|---|
| Ground Clearance* | 18.10 in (45.97 cm) - Starting 2026 |
| Height - FOPS Cab* | 150.40 in (382.02 cm) - Starting 2026 |
| Height - ROPS/Canopy* | 157.50 in (400.05 cm) - Starting 2026 |
| Height - Top of Stack* | 152.60 in (387.60 cm) - Starting 2026 |
| Length - Basic Tractor - With Drawbar | 206.40 in (524.26 cm) - Starting 2026 |
| Length - Basic Tractor - With Winch | 218.30 in (554.48 cm) - Starting 2026 |
| Length - Track on Ground | 136.60 in (346.96 cm) - Starting 2026 |
| Length - With Multi-Shank Ripper | 257.40 in (653.80 cm) - Starting 2026 |
| Length - With Single-Shank Ripper | 257.00 in (652.78 cm) - Starting 2026 |
| Length - With SU-Blade** | 259.90 in (660.15 cm) - Starting 2026 |
| Length - With U-Blade | 274.30 in (696.72 cm) - Starting 2026 |
| Overall Length - Basic Tractor | 193.30 in (490.98 cm) - Starting 2026 |
| Overall Length - SU-Blade/SS Ripper | 323.60 in (821.94 cm) - Starting 2026 |
| Track Gauge | 88.60 in (225.04 cm) - Starting 2026 |
| Width - Over Trunnions | 130.30 in (330.96 cm) - Starting 2026 |
| Width - Without Trunnions - Standard Shoe | 113.00 in (287.02 cm) - Starting 2026 |
| Bore | 5.70 cu in (93.41 cu cm) - Starting 2026 |
|---|---|
| Displacement | 1,106.00 cu in (18,124.13 cu cm) - Starting 2026 |
| Emissions | U.S. EPA Tier 2 or Tier 3 equivalent - Starting 2026 |
| Engine Model | Cat® C18 - Starting 2026 |
| Engine Power - Gross SAE J1995 | 487.00 hp (363.16 kw) - Starting 2026 |
| Engine Power - ISO 14396 | 479.00 hp (357.20 kw) - Starting 2026 |
| Engine Power - Net SAE J1349/ISO 9249 | 452.00 hp (337.06 kw) - Starting 2026 |
| Stroke | 7.20 in (18.29 cm) - Starting 2026 |
| Bore | 5.70 cu in (93.41 cu cm) - Starting 2026 |
|---|---|
| Displacement | 1,106.00 cu in (18,124.13 cu cm) - Starting 2026 |
| Emissions | U.S. EPA Tier 4 / EU Stage V - Starting 2026 |
| Engine Model | Cat® C18 - Starting 2026 |
| Engine Power - Gross SAE J1995 | 477.00 hp (355.70 kw) - Starting 2026 |
| Engine Power - ISO 14396 | 468.00 hp (348.99 kw) - Starting 2026 |
| Engine Power - Net SAE J1349/ISO 9249 | 440.00 hp (328.11 kw) - Starting 2026 |
| Stroke | 7.20 cu in (117.99 cu cm) - Starting 2026 |
| Cooling System | 21.00 gal (79.49 l) - Starting 2026 |
|---|---|
| DEF Tank (Tier 4 only) | 9.50 gal (35.96 l) - Starting 2026 |
| Engine Crankcase* | 10.00 gal (37.85 l) - Starting 2026 |
| Final Drives (each) | 4.00 gal (15.14 l) - Starting 2026 |
| Fuel Tank (Fast Fill) | 248.00 gal (938.68 l) - Starting 2026 |
| Fuel Tank (Splash Fill) | 254.00 gal (961.39 l) - Starting 2026 |
| Hydraulic System Tank | 24.00 gal (90.84 l) - Starting 2026 |
| Note 2 | Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. - Starting 2026 |
| Note 3 | All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - Starting 2026 |
| Note 4 | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - Starting 2026 |
| Pivot Shaft Oil | 8.00 gal (30.28 l) - Starting 2026 |
| Powertrain | 40.00 gal (151.40 l) - Starting 2026 |
| Roller Frames (each) | 12.00 gal (45.42 l) - Starting 2026 |
| Fan Pump | 21.00 gpm (79.49 lpm) - Starting 2026 |
|---|---|
| Lift Cylinder Relief Valve Setting | 3800 lbf/in - Starting 2026 |
| Pump Output - Steering | 96.00 gpm (363.36 lpm) - Starting 2026 |
| Pump Type | Piston-type geared to flywheel - Starting 2026 |
| Ripper - Lift - Relief Valve Setting | 3800 psi - Starting 2026 |
| Ripper - Pitch - Relief Valve Setting | 3800 psi - Starting 2026 |
| Steering System - Pressure | 5874 psi - Starting 2026 |
| Tank Capacity | 24.00 gpm (90.84 lpm) - Starting 2026 |
| Tilt Cylinder Flow - Head End Flow | 53.00 gpm (200.61 lpm) - Starting 2026 |
| Tilt Cylinder Flow - Rod End Flow | 53.00 gpm (200.61 lpm) - Starting 2026 |
| Tilt Cylinder Relief Valve Setting | 2799 psi - Starting 2026 |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.60 in (87.88 cm) - Starting 2026 |
|---|---|
| Maximum Penetration - Standard Tip | 31.40 in (79.76 cm) - Starting 2026 |
| Maximum Penetration Force - Shank Vertical | 34,621.00 lbs ft (46,939.15 nm) - Starting 2026 |
| Number of Pockets | 3 - Starting 2026 |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | 81,156.00 lbs ft (110,031.31 nm) - Starting 2026 |
| Total Operating Weight* - With SU-Blade and Ripper | 111,739.00 lbs (50,684.02 kg) - Starting 2026 |
| Weight | 12,136.00 lbs (5,504.80 kg) - Starting 2026 |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.70 in (88.14 cm) - Starting 2026 |
|---|---|
| Maximum penetration depth (standard tip) | 48.50 in (123.19 cm) - Starting 2026 |
| Maximum penetration force * (shank vertical) | 35,520.00 lbs ft (48,158.02 nm) - Starting 2026 |
| Number of Pockets | 1 - Starting 2026 |
| Pryout Force | 74,637.00 lbs ft (101,192.85 nm) - Starting 2026 |
| Total Operating Weight* (with SU Blade and noted ripper) | 110,205.00 lbs (49,988.21 kg) - Starting 2026 |
| Weight | 10,701.00 lbs (4,853.90 kg) - Starting 2026 |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 32.20 in (81.79 cm) - Starting 2026 |
|---|---|
| Maximum penetration depth (standard tip) | 68.00 in (172.72 cm) - Starting 2026 |
| Maximum penetration force * (shank vertical) | 38,667.00 lbs ft (52,424.72 nm) - Starting 2026 |
| Number of Pockets | 1 - Starting 2026 |
| Pryout Force | 74,412.00 lbs ft (100,887.79 nm) - Starting 2026 |
| Total Operating Weight* (with SU Blade and noted ripper) | 110,485.00 lbs (50,115.22 kg) - Starting 2026 |
| Weight | 10,981.00 lbs (4,980.90 kg) - Starting 2026 |
| FOPS | Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - Starting 2026 |
|---|---|
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - Starting 2026 |
| Sound | The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. NOTE: The dynamic sound power level uncertainty is +/-2 dB(A). - Starting 2026 |
| Sound (1) | The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A). - Starting 2026 |
| Sound (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - Starting 2026 |
| Brake Count | 8 - Starting 2026 |
|---|---|
| Brake Diameter | 15.50 in (39.37 cm) - Starting 2026 |
| Brake Type | Spring Applied Wet Disc - Starting 2026 |
| Steering Type | Differential - Starting 2026 |
| 1.0 Forward | 2.20 mph (3.54 kph) - Starting 2026 |
|---|---|
| 1.0 Reverse | 2.70 mph (4.35 kph) - Starting 2026 |
| 2.0 Forward | 3.90 mph (6.28 kph) - Starting 2026 |
| 2.0 Reverse | 4.80 mph (7.72 kph) - Starting 2026 |
| 3.0 Forward | 6.80 mph (10.94 kph) - Starting 2026 |
| 3.0 Reverse | 8.40 mph (13.52 kph) - Starting 2026 |
| Type | Planetary powershift - Starting 2026 |
| Ground Clearance | 18.10 in (45.97 cm) - Starting 2026 |
|---|---|
| Ground Contact Area | 45.6 ft² - Starting 2026 |
| Grouser Height | 3.30 in (8.38 cm) - Starting 2026 |
| Length - Track on Ground | 136.60 in (346.96 cm) - Starting 2026 |
| Number of Carrier Rollers | 1 per side (optional) - Starting 2026 |
| Pitch | 9.40 in (23.88 cm) - Starting 2026 |
| Shoe Type | Extreme Service - Starting 2026 |
| Shoes/Side | 43 - Starting 2026 |
| Track Gauge | 88.60 in (225.04 cm) - Starting 2026 |
| Track Rollers/Side | 8 - Starting 2026 |
| Width - Shoe | 24.00 in (60.96 cm) - Starting 2026 |
| Operating Weight | 110,225.00 lbs (49,997.28 kg) - Starting 2026 |
|---|---|
| Shipping Weight | 84,373.00 lbs (38,271.00 kg) - Starting 2026 |
| Drum Width | 12.60 in (32.00 cm) - Starting 2026 |
|---|---|
| Maximum Drum Capacity - Optional Cable Length | 204.00 ft (62.18 m) - Starting 2026 |
| Maximum Drum Capacity - Recommended Cable Length | 257.00 in (652.78 cm) - Starting 2026 |
| Oil Capacity | 4.00 gal (15.14 l) - Starting 2026 |
| Weight* | 3,950.00 lbs (1,791.69 kg) - Starting 2026 |
| Winch Model | PA 140VS - Starting 2026 |
| Wire Cable Diameter - Optional | 1.25 ft (0.38 m) - Starting 2026 |
| Wire Cable Diameter - Recommended | 1.13 in (2.87 cm) - Starting 2026 |
| Wire Cable Ferrule Size - Length | 2.80 in (7.11 cm) - Starting 2026 |
| Wire Cable Ferrule Size - Outside Diameter | 2.40 in (6.10 cm) - Starting 2026 |