- Category: Excavators ➔
- Manufacturer: Case ➔
- Model: CX245D SR ➔
The Case CX245D SR is a reduced tail swing excavator in the CX D series, designed for work in confined job sites where rear clearance is limited. It is commonly used in utility, site development, roadwork, and general excavation applications. The machine features a short-radius upper structure, hydraulic system designed for digging and lifting performance, and a cab configured for operator visibility and control. As an excavator in the mid-size class, the CX245D SR is suited to trenching, grading, loading, and material handling tasks. It is part of Case Construction Equipment's lineup of crawler excavators.
General Specifications
| Digging Depth ft (m) | 21.8 (6.6)
Starting 2025 Model Year |
| Digging Reach ft. (m) | 31.8 (9.7)
Starting 2025 Model Year |
| Engine hp (kW) | 160 (119.3)
Starting 2025 Model Year |
| Operating Weight lbs (kg) | 56,900 (25,800)
Starting 2025 Model Year |
Boom/Stick Excavator Option 1
| Bucket rotation | 177 degrees
|
| Dig radius at ground line | 361.50 in (918.21 cm)
|
| Dump height | 300.40 in (763.02 cm)
|
| Max Digging Depth | 21.90 ft (6.68 m)
|
| Max Digging Reach on Ground | 31.80 ft (9.69 m)
|
| Max Reach Along Ground | 32.30 ft (9.85 m)
|
| Max.Dumping Height | 26.20 ft (7.99 m)
|
| Maximum vertical wallcut depth | 18.00 ft (5.49 m)
|
| Mximum dig radius | 368.90 in (937.01 cm)
|
Boom/Stick Excavator Option 2
| Bucket rotation | 177 degrees
|
| Dig radius at ground line | 380.80 in (967.23 cm)
|
| Dump height | 313.80 in (797.05 cm)
|
| Max Digging Depth | 21.30 ft (6.49 m)
|
| Max Vertical Wall Digging Depth | 19.50 ft (5.94 m)
|
| Maximum dig radius | 387.80 in (985.01 cm)
|
| Maximum reach height | 427.60 in (1,086.10 cm)
|
Brakes
| Brakes Type | Mechanical disc
|
| Service brake | SAHR disc - each motor
|
| Travel control | Dual stage relief or counter balance design
|
Capacities
| Cooling system | 8.50 gal (32.17 l)
|
| Engine oil w/ filter change | 6.20 gal (23.47 l)
|
| Final Drive | 1.40 gal (5.30 l)
|
| Fuel Tank | 84.60 gal (320.21 l)
|
| Hydraulic system | 66.60 gal (252.08 l)
|
| Hydraulic Tank | 30.20 gal (114.31 l)
|
| Swing drive | 1.40 gal (5.30 l)
|
Dimensions
| Boom length | 18.80 ft (5.73 m)
|
| Center to center - idler to sprocket | 12.10 ft (3.69 m)
|
| Ground Clearance | 1.50 ft (0.46 m)
|
| Ground pressure | 5.8 psi
|
| Overall Height with cab | 10.50 ft (3.20 m)
|
| Overall length (W/bucket) | 29.30 ft (8.93 m)
|
| Overall Track Length | 14.70 ft (4.48 m)
|
| Overall width -Upper Structure | 9.90 ft (3.02 m)
|
| Rear Ground Clearance | 5.90 ft (1.80 m)
|
| Tail Swing Radius | 6.50 ft (1.98 m)
|
Engine
| Air filter type | Dry type element with warning restriction indicator
|
| Bore | 4.60 in (11.68 cm)
|
| Displacement | 317.40 cu in (5,201.27 cu cm)
|
| Emission Tier Level | Tier 4
|
| Engine Make | Isuzu
|
| Engine Model | Isuzu 4 HKIX
|
| Fuel Filter | Replaceable full flow spin-on cartridge
|
| Fuel injection | Direct injection - electronic
|
| Fuel Type | Requires ultra low-sulfur fuel B5 biodiesel tolerant
|
| Horsepower per SAE J1349 Net | 160.00 hp (119.31 kw)
|
| Max Torque | 458.10 lbs ft (621.09 nm)
|
| Net Power | 160.00 hp (119.31 kw)
|
| Oil Filter | Replaceable full flow spin-on cartridge
|
| Power Measured @ | 1800 rpm
|
| Stroke | 5.00 in (12.70 cm)
|
Hydraulic System
| Main pump - Maximum flow | 111.50 gal (422.03 l)
|
| System relief pressure | 4975 psi
|
Operating Specifications
| Arm Breakout Force | 25,178.60 lbs (11,420.84 kg)
|
| Arm size | 9.80 ft (2.99 m)
|
| Operating Weight | 56,879.30 lbs (25,800.05 kg)
|
Performance
| Lift over end 10' radius | 19,048.00 lbs (8,640.04 kg)
|
| Lift over end Max. reach | 5,710.00 lbs (2,590.02 kg)
|
| Lift over side 10' radius | 19,048.00 lbs (8,640.04 kg)
|
| Lift over side Max. reach | 5,313.20 lbs (2,410.03 kg)
|
Swing Mechanism
Transmission
| Max Speed | 3.20 mph (5.15 kph)
|
Undercarriage
| Track Shoe Width | 31.50 in (80.01 cm)
|
