Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


Caterpillar 6060/6060 FS Excavator Specs

Attachments

Caterpillar 6060/6060 FS Excavator Attachments specifications
All Buckets (Fs And Bh) Are Equipped With A Wear Package Consisting Of: (1) - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
All Buckets (Fs And Bh) Are Equipped With A Wear Package Consisting Of: (2) - Wing shrouds on side walls - Heel shrouds at bottom edges
Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (1) - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (2) - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
Shovel Attachment With Unique Tripower Kinematics Ensuring The Following Main Features: (3) - Constant boom momentum throughout the entire lift arc - Crowd force assistance
Type (1) Catwalks with rails at booms
Type (2) Guards for shovel cylinders (FS)
Type (3) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4) Inspection holes in booms (FS and BH) and stick (FS)
Type (5) Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (6) Booms and sticks are stress-relieved after welding
Type (7) Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Type (8) Special wear packages for highly abrasive materials on request

Automatic Lubrication System

Caterpillar 6060/6060 FS Excavator Automatic Lubrication System specifications
Capacity - Grease Container 264.00 gal (999.24 l)
Type (1) Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Type (2) System failures displayed by Board Control System
Type (3) Grease filters (200 m) between service station and container as well as directly behind grease pump
Type (4) Connected to main lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage
Type (5) Connected to main lube system are: - raceways of swing roller bearing - 2 greasing pinions for the internal gearing of swing ring

Bucket

Caterpillar 6060/6060 FS Excavator Bucket specifications
Bucket Capacity - Backhoe (Heaped 1:1) 44.5 cu yd
Bucket Capacity - Front Shovel (Heaped 2:1) 44.5 cu yd

Diesel Engines

Caterpillar 6060/6060 FS Excavator Diesel Engines specifications
Alternators 2 150 A
Aspiration Turbocharged and charge air-cooled
Bore 6.70 in (17.02 cm)
Components (1) Additional high-capacity water separator
Components (2) Two-stage fuel filter including water separator
Components (3) Heavy-duty air filters
Components (4) Microprocessed engine management
Components (5) Hydraulically driven radiator fan with electronically controlled fan speed
Displacement 3,574.00 cu in (58,567.50 cu cm)
Emissions U.S. EPA flex
Fuel Tank Capacity 3,435.00 gal (13,001.48 l)
Make/Model 2 Cat 3512C (Tier 2)
Maximum Altitude - Without Deration - At 20 Degrees C (68 Degrees F) Above Sea Level 9,800.00 ft (2,987.04 m)
Number Of Cylinders - Each Engine 12
Stroke 8.50 in (21.59 cm)
Total Rated Gross Power - Sae J1995 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total Rated Net Power - Iso 3046/1 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
Total Rated Net Power - Sae J1349 2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

Electric Motor - 6060 Ac/6060 Ac Fs

Caterpillar 6060/6060 FS Excavator Electric Motor - 6060 Ac/6060 Ac Fs specifications
Electric Motor - 6060 Ac/6060 Ac Fs Type Squirrel cage induction motor
Frequency 50 Hz (60 Hz on request)
Output 2,414.00 hp (1,800.15 kw)
Rated Current In 194 A (at 6.6 kV)
Revolutions 1500 min-1 (1,800 min-1 at 60 Hz)
Starting Current 350% of IN (197% of IN Optional)
Voltage 6.6 kV 10% (other on request)

Electrical System - Diesel Drive

Caterpillar 6060/6060 FS Excavator Electrical System - Diesel Drive specifications
Batteries In Series/Parallel Installation 6 210 Ah - 12V each; 630 Ah - 24V in total
Components (1) 16 LED service lights
Components (2) Battery isolation relays and switches
Components (3) Emergency stop switches accessible from ground level and in engine module
Components (4) 12 LED high-brightness working flood lights - 10 for working area - 2 for rear end
Components (5) 2 LED high-brightness access flood lights
System Voltage 24V

Engine

Caterpillar 6060/6060 FS Excavator Engine specifications
Engine Model 2 Cat 3512C
Gross Power - Sae J1995 3,000.00 hp (2,237.14 kw)
Net Power - Sae J1349 3,000.00 hp (2,237.14 kw)
Note Electric drive option available (1800 kW) on 6060 AC/6060 AC FS

General

Caterpillar 6060/6060 FS Excavator General specifications
Engine Output - Sae J1995 Cat 3512C - 2240 kW (3,000 hp)
Operating Weight Face Shovel - 569 tonnes (627 tons); Backhoe - 570 tonnes (628 tons)
Standard Bucket Capacity Face Shovel (heaped 2:1) - 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) - 34.0 m3 (44.5 yd3)

Hydraulic Oil Cooling

Caterpillar 6060/6060 FS Excavator Hydraulic Oil Cooling specifications
Components Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Features (1) Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features (2) Fan speed and flow of oil to the coolers are thermostatically controlled
Features (3) Extremely high cooling efficiency to ensure optimum oil temperature
Oil Flow Of Cooling Pumps 4 488 L/min (4 129 gal/min)

Hydraulic System With Pump Managing System

Caterpillar 6060/6060 FS Excavator Hydraulic System With Pump Managing System specifications
Hydraulic Tank Capacity - Ac Version - Approximately 1,320.00 gal (4,996.20 l)
Hydraulic Tank Capacity - Diesel Version - Approximately 1,876.00 gal (7,100.66 l)
Main Pumps - Ac Version 4 variable flow axial piston pumps
Main Pumps - Diesel Version 4 swash plate double pumps
Main Pumps - Maximum Oil Flow - Ac Version 4 933 L/min (4 246 gal/min)
Main Pumps - Maximum Oil Flow - Diesel Version 4 1300 L/min (4 343 gal/min)
Maximum Pressure - Attachment 4640 psi
Maximum Pressure - Swing Pumps 5365 psi
Maximum Pressure - Travel 5365 psi
Swing Pumps - Ac Version 3 reversible swash plate pumps
Swing Pumps - Diesel Version 4 reversible swash plate pumps
Swing Pumps - Maximum Oil Flow - Ac Version 3 491 L/min (3 131 gal/min)
Swing Pumps - Maximum Oil Flow - Diesel Version 4 352 L/min (4 93 gal/min)
Total Volume Of Hydraulic Oil - Ac Version - Approximately 2,483.00 gal (9,398.16 l)
Total Volume Of Hydraulic Oil - Diesel Version - Approximately 1,930.00 gal (7,305.05 l)

Operating Specifications

Caterpillar 6060/6060 FS Excavator Operating Specifications specifications
Bucket Payload 134,000.00 lbs (60,781.45 kg)
Operating Weight - Backhoe 1,298,000.00 lbs (588,763.63 kg)
Operating Weight - Front Shovel 1,300,000.00 lbs (589,670.81 kg)

Operating Weights

Caterpillar 6060/6060 FS Excavator Operating Weights specifications
6060 - Ground Pressure 25.5 N/cm2 (37.0 psi)
6060 - Operating Weight 1,257,280.00 lbs (570,293.32 kg)
6060 - Standard Track Pads 4.60 ft (1.40 m)
6060 Ac - Ground Pressure 24.5 N/cm2 (35.6 psi)
6060 Ac - Operating Weight 1,207,460.00 lbs (547,695.32 kg)
6060 Ac - Standard Track Pads 4.60 ft (1.40 m)
6060 Ac Fs - Ground Pressure 24.4 N/cm2 (35.4 psi)
6060 Ac Fs - Operating Weight 1,204,370.00 lbs (546,293.72 kg)
6060 Ac Fs - Standard Track Pads 4.60 ft (1.40 m)
6060 Fs - Ground Pressure 25.4 N/cm2 (36.8 psi)
6060 Fs - Operating Weight 1,254,200.00 lbs (568,896.26 kg)
6060 Fs - Standard Track Pads 4.60 ft (1.40 m)
Note Other track pads available on request.

Operator'S Cab

Caterpillar 6060/6060 FS Excavator Operator'S Cab specifications
Board Control System (Bcs) Features Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system
Components (1) Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
Components (10) Robust instrument panel including large colored BCS screen with transflective technology
Components (11) Sliding emergency ladder (kick-down type) with ladder cage
Components (12) Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated
Components (13) Roller blinds at all windows
Components (2) Under roof mounted heating ventilating and air conditioning system
Components (3) Windshield with parallel intermittent wiper/washer
Components (4) All-round safety glass, armored windshield and sliding side window
Components (5) FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
Components (6) Fold-away auxiliary seat with safety belt
Components (7) External sun shields at side and rear windows
Components (8) Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (9) Joystick controls integrated in independently adjustable seat consoles
Internal Dimensions Of Cab - Height 7.10 ft (2.16 m)
Internal Dimensions Of Cab - Length 7.30 ft (2.23 m)
Internal Dimensions Of Cab - Width 5.30 ft (1.62 m)
Operator'S Eye Level - Approximately 25.00 ft (7.62 m)

Retractable Service Station

Caterpillar 6060/6060 FS Excavator Retractable Service Station specifications
Installation Retractable service station installed underneath the engine module and easily accessible from ground.

Swing System

Caterpillar 6060/6060 FS Excavator Swing System specifications
Features (1) Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features (2) Closed-loop swing circuit with torque control
Features (3) Hydraulic braking of the swing motion by counteracting control
Features (4) All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Maximum Swing Speed 3.8 rpm
Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
Swing Drive 4 compact planetary transmissions with axial piston motors
Swing Ring Triple-race roller bearing with sealed internal gearing

Undercarriage

Caterpillar 6060/6060 FS Excavator Undercarriage specifications
Bottom Rollers - Each Side 7
Components (1) All running surfaces of sprockets, idlers, rollers & pad links, as well as teeth contact areas of sprocket & pad links, are hardened
Components (2) Acoustic travel alarm
Components (3) Cast double-grouser combined pad links with bushings connected by hardened full floating pins
Components (4) Bottom rollers are connected to the automatic lubrication system
Components (5) Fully hydraulic, self-adjusting track tensioning system with membrane accumulator
Components (6) Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Gradeability - Travel Drives - Maximum 52 %
Maximum Tractive Force 664,300.00 lbs (301,321.79 kg)
Parking Brakes Wet multiple-disc brake, spring applied/hydraulically released
Support Rollers - Each Side 2 plus a skid plate in between
Track Pads - Each Side 42
Travel Drives - Each Side 1 planetary transmission with 2 two-stage axial piston motors
Travel Speed - 1st Stage - Maximum 0.87 mph (1.40 kph)
Travel Speed - 2nd Stage - Maximum 1.24 mph (2.00 kph)
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.