Caterpillar 7295 Excavator Specs

Category: Excavators ➔
Manufacturer: Caterpillar ➔
Model: 7295 ➔

Dimensions

Caterpillar 7295 Excavator Dimensions specifications
Dipper Capacity	19.1-38.2 m3 (25-50 yd3)
Dipper Payload	100,000.00 lbs (45,359.29 kg)
Height	39.17 ft (11.94 m)
Length	100.00 ft (30.48 m)
Note	Dependent on application and material density.
Weight	1,739,998.00 lbs (789,250.80 kg)
Width	40.67 ft (12.40 m)

Electrical

Caterpillar 7295 Excavator Electrical specifications
Drive	IGBT Acutrol drive system.
Note	Other voltages available to suit customer requirements.
Power Requirements - 50 Hz	6,000V, 6,600V, 7,200V
Power Requirements - 60 Hz	4,160V, 7,200V
Power Requirements - Average Power Demand	538-753 kW (721-1,010 hp)
Power Requirements - Peak Power	2,886.00 hp (2,152.13 kw)
Power Requirements - Voltage	3 phase, 50/60 Hz, 7,200V

Front End

Caterpillar 7295 Excavator Front End specifications
Components	One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd	Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Note	High impact ropes available as an option
Standard Rope Data - Boom Suspension - Diameter	2.80 in (7.11 cm)
Standard Rope Data - Boom Suspension - No.	4
Standard Rope Data - Crowd - Diameter	2.30 in (5.84 cm)
Standard Rope Data - Crowd - No.	1
Standard Rope Data - Dipper Trip - Diameter	0.70 in (1.78 cm)
Standard Rope Data - Dipper Trip - No.	1
Standard Rope Data - Hoist - Diameter	2.40 in (6.10 cm)
Standard Rope Data - Hoist - No.	2
Standard Rope Data - Retract - Diameter	2.30 in (5.84 cm)
Standard Rope Data - Retract - No.	1

Lube System

Caterpillar 7295 Excavator Lube System specifications
Components (1)	6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2)	External fast fill from lower level.
Lube System Type	Automatic, single-line system for open gear lubricant and grease.

Main Structures

Caterpillar 7295 Excavator Main Structures specifications
Crawler Dimensions - Overall Width 182.9 Cm (72 In) Treads, Standard	28.30 in (71.88 cm)
Ground Bearing Pressure	Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - 182.9 Cm (72 In) Treads	39.00 in (99.06 cm)
Ground Bearing Pressure - Total Effective Bearing Area	315.6 ft2
Hoist	A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
Planetary Propel	Dual-motor independent drive.
Swing	Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Upper Works Overall Width - Including Standard Walkways	41.40 in (105.16 cm)

Optimal Working Ranges*

Caterpillar 7295 Excavator Optimal Working Ranges* specifications
Cutting Height - Maximum	45.00 ft (13.72 m)
Cutting Radius - Maximum	67.60 ft (20.60 m)
Dumping Height - With Clearance To Open Dipper Door	27.60 ft (8.41 m)
Note (1)	Optimal working ranges based on loading a Cat 785D truck.
Note (2)	*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Radius Of Level Floor	48.90 ft (14.90 m)
Revolving Frame Tail Swing Radius	2.20 ft (0.67 m)

Weights

Caterpillar 7295 Excavator Weights specifications
Ballast - Furnished By Customer	352,000.00 lbs (159,664.71 kg)
Note (1)	These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2)	All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Working Weight - With Dipper And Standard Links	1,748,837.00 lbs (793,260.10 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon