Caterpillar 7395 Excavator Specs

Category: Excavators ➔
Manufacturer: Caterpillar ➔
Model: 7395 ➔

Dimensions

Caterpillar 7395 Excavator Dimensions specifications
Dipper Capacity	20.6-55.8 m3 (27-73 yd3)
Dipper Payload	154,323.40 lbs (70,000.00 kg)
Note	Dependent on application and material density.

Electrical

Caterpillar 7395 Excavator Electrical specifications
Drive	IGBT Acutrol drive system.
Note	Other voltages available to suit customer requirements.
Power Requirements - 50 Hz	6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - 60 Hz	7,200V
Power Requirements - Average Power Demand	777-1087 kW (1,042-1,458 hp)
Power Requirements - Peak Power	4,165.00 hp (3,105.89 kw)
Power Requirements - Voltage	3 phase, 50/60 Hz, 7,200V

Front End

Caterpillar 7395 Excavator Front End specifications
Components	One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd	Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Note	High impact ropes available as an option
Rope Data - Boom Suspension - Diameter	3.30 in (8.38 cm)
Rope Data - Boom Suspension - No.	4
Rope Data - Crowd - Diameter	2.50 in (6.35 cm)
Rope Data - Crowd - No.	1
Rope Data - Dipper Trip - Diameter	0.70 in (1.78 cm)
Rope Data - Dipper Trip - No.	1
Rope Data - Hoist - Diameter	2.80 in (7.11 cm)
Rope Data - Hoist - No.	2
Rope Data - Retract - Diameter	2.50 in (6.35 cm)
Rope Data - Retract - No.	1

Lube System

Caterpillar 7395 Excavator Lube System specifications
Components (1)	6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2)	External fast fill from lower level.
Lube System Type	Automatic, single-line system for open gear lubricant and grease.

Main Structures

Caterpillar 7395 Excavator Main Structures specifications
Crawler Dimensions - Overall Width 213.4 Cm (84 In) Treads, Standard	32.80 ft (10.00 m)
Crawler Dimensions - Overall Width 274.3 Cm (108 In) Treads	34.80 ft (10.61 m)
Ground Bearing Pressure	Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - 213.4 Cm (84 In) Treads - Standard	54 psi
Ground Bearing Pressure - 274.3 Cm (108 In) Treads	43 psi
Ground Bearing Pressure - Total Effective Bearing Area (1)	343 ft2
Ground Bearing Pressure - Total Effective Bearing Area (2)	442 ft2
Hoist	A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Planetary Propel	Dual-motor independent drive.
Swing	Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Upper Works Overall Width - Including Standard Walkways	531.00 in (1,348.74 cm)

Optimal Working Ranges*

Caterpillar 7395 Excavator Optimal Working Ranges* specifications
Cutting Height - Maximum	48.80 ft (14.87 m)
Cutting Radius - Maximum	74.80 ft (22.80 m)
Dumping Height - With Clearance To Open Dipper Door	30.90 ft (9.42 m)
Note (1)	Optimal working ranges based on loading a Cat 793F truck.
Note (2)	*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Radius Of Level Floor	52.50 ft (16.00 m)
Revolving Frame Tail Swing Radius	30.60 ft (9.33 m)

Weights

Caterpillar 7395 Excavator Weights specifications
Ballast - Furnished By Customer	574,000.00 lbs (260,362.34 kg)
Note (1)	These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2)	All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Working Weight - With Dipper And Standard Links	2,652,000.00 lbs (1,202,928.46 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon