Caterpillar 7495 HD Excavator Specs

Category: Excavators ➔
Manufacturer: Caterpillar ➔
Model: 7495 HD ➔

Dimensions

Caterpillar 7495 HD Excavator Dimensions specifications
Dipper Capacity	27.5-60.4 m3 (36-79 yd3) — Starting 2026 Model Year
Dipper Payload	90.00 t (90,000.00 kg) — Starting 2026 Model Year

Electrical

Caterpillar 7495 HD Excavator Electrical specifications
Drive	IGBT Acutrol drive system. — Starting 2026 Model Year
Power Requirements - 50 Hz	6,000V, 6,600V, 7,200V, 11,000V — Starting 2026 Model Year
Power Requirements - 60 Hz	7,200V — Starting 2026 Model Year
Power Requirements - Average Power Demand	832-1165 kW (1,116-1,562 hp) — Starting 2026 Model Year
Power Requirements - Peak power	4,466.00 hp (3,330.35 kw) — Starting 2026 Model Year
Power Requirements - Voltage	3 phase, 50/60 Hz, 7,200V — Starting 2026 Model Year

Front End

Caterpillar 7495 HD Excavator Front End specifications
Components	One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. — Starting 2026 Model Year
Crowd	Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. — Starting 2026 Model Year
Rope Data - Boom Suspension - Diameter	3.25 in (8.25 cm) — Starting 2026 Model Year
Rope Data - Boom Suspension - No.	4 — Starting 2026 Model Year
Rope Data - Crowd - Diameter	2.50 in (6.35 cm) — Starting 2026 Model Year
Rope Data - Crowd - No.	1 — Starting 2026 Model Year
Rope Data - Dipper Trip - Diameter	0.63 in (1.59 cm) — Starting 2026 Model Year
Rope Data - Dipper Trip - No.	1 — Starting 2026 Model Year
Rope Data - Hoist - Diameter	2.75 in (6.98 cm) — Starting 2026 Model Year
Rope Data - Hoist - No.	2 — Starting 2026 Model Year
Rope Data - Note	High impact ropes available as an option. — Starting 2026 Model Year
Rope Data - Retract - Diameter	2.50 in (6.35 cm) — Starting 2026 Model Year
Rope Data - Retract - No.	1 — Starting 2026 Model Year

Lube System

Caterpillar 7495 HD Excavator Lube System specifications
Components (1)	6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. — Starting 2026 Model Year
Components (2)	External fastfill from lower level. — Starting 2026 Model Year
Type	Automatic, single-line system for open gear lubricant and grease. — Starting 2026 Model Year

Main Structures

Caterpillar 7495 HD Excavator Main Structures specifications
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard	32.75 ft (9.98 m) — Starting 2026 Model Year
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads	34.75 ft (10.59 m) — Starting 2026 Model Year
Ground Bearing Pressure	Ground bearing pressure is dependent upon many factors. — Starting 2026 Model Year
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard	58 psi — Starting 2026 Model Year
Ground Bearing Pressure - 274.3 cm (108 in) Treads	46 psi — Starting 2026 Model Year
Ground Bearing Pressure - Total Effective Bearing Area (1)	343 ft² — Starting 2026 Model Year
Ground Bearing Pressure - Total Effective Bearing Area (2)	442 ft² — Starting 2026 Model Year
Hoist	A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. — Starting 2026 Model Year
Planetary Propel	Dual-motor independent drive. — Starting 2026 Model Year
Swing	Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. — Starting 2026 Model Year
Upper Works Overall Width - Including Standard Walkways	44.25 ft (13.49 m) — Starting 2026 Model Year

Optimal Working Ranges*

Caterpillar 7495 HD Excavator Optimal Working Ranges* specifications
Cutting Height - Maximum	48.75 ft (14.86 m) — Starting 2026 Model Year
Cutting Radius - Maximum	74.75 ft (22.78 m) — Starting 2026 Model Year
Dumping Height - With Clearance to Open Dipper Door	30.84 ft (9.40 m) — Starting 2026 Model Year
Radius of Level Floor	52.49 ft (16.00 m) — Starting 2026 Model Year
Revolving Frame Tail Swing Radius	30.51 ft (9.30 m) — Starting 2026 Model Year

Weights

Caterpillar 7495 HD Excavator Weights specifications
Ballast - Furnished By Customer	574,000.00 lbs (260,362.34 kg) — Starting 2026 Model Year
Working Weight - With Dipper and Standard Links	2,856,700.00 lbs (1,295,778.93 kg) — Starting 2026 Model Year

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon