Caterpillar 7495 with Rope Crowd Excavator Specs

Category: Excavators ➔
Manufacturer: Caterpillar ➔
Model: 7495 with Rope Crowd ➔

Dimensions

Caterpillar 7495 with Rope Crowd Excavator Dimensions specifications
Dipper Capacity	30.6-62.7 m3 (40-82 yd3) — Starting 2026 Model Year
Dipper Payload	120.00 t (120,000.00 kg) — Starting 2026 Model Year
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)	120.00 t (120,000.00 kg) — Starting 2026 Model Year

Dimensions (Approximate) - Optimal Working Ranges*

Caterpillar 7495 with Rope Crowd Excavator Dimensions (Approximate) - Optimal Working Ranges* specifications
Cutting Height - Maximum	53.50 ft (16.31 m) — Starting 2026 Model Year
Cutting Radius - Maximum	80.00 ft (24.38 m) — Starting 2026 Model Year
Dumping Height - With Clearance to Open Dipper Door	28.90 ft (8.81 m) — Starting 2026 Model Year
Radius of Level Floor	56.10 ft (17.10 m) — Starting 2026 Model Year
Revolving Frame Tail Swing Radius	30.50 ft (9.30 m) — Starting 2026 Model Year

Dimensions - Working Ranges

Caterpillar 7495 with Rope Crowd Excavator Dimensions - Working Ranges specifications
Dipper Capacities	30.6-62.7 m3 (40-82 yd3) — Starting 2026 Model Year
Dipper Payload	120.00 t (120,000.00 kg) — Starting 2026 Model Year
Maximum Dumping Height	28.90 ft (8.81 m) — Starting 2026 Model Year
Operating Weight	3,056,000.00 lbs (1,386,180.00 kg) — Starting 2026 Model Year

Electrical

Caterpillar 7495 with Rope Crowd Excavator Electrical specifications
Drive	IGBT Acutrol drive system — Starting 2026 Model Year
Power Requirements - 50 Hz	6,000V, 6,600V, 7,200V, 11,000V — Starting 2026 Model Year
Power Requirements - 60 Hz	7,200V, 13,800V — Starting 2026 Model Year
Power Requirements - Average Power Demand	934-1308 kW — Starting 2026 Model Year
Power Requirements - Note	Other voltage options available to suit customer requirements — Starting 2026 Model Year
Power Requirements - Peak power	3,737.00 kw (5,011.32 hp) — Starting 2026 Model Year
Power Requirements - Voltage	3 phase, 50/60 Hz, 7,200V — Starting 2026 Model Year
System Voltage - Nominal	50/60 Hz, 7,200V — Starting 2026 Model Year

Front End

Caterpillar 7495 with Rope Crowd Excavator Front End specifications
Crowd (1)	Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. — Starting 2026 Model Year
Crowd (2)	(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. — Starting 2026 Model Year
Rope Data - Boom Suspension - Diameter	3.25 in (8.25 cm) — Starting 2026 Model Year
Rope Data - Boom Suspension - No.	4 — Starting 2026 Model Year
Rope Data - Crowd - Diameter	2.50 in (6.35 cm) — Starting 2026 Model Year
Rope Data - Crowd - No.	1 — Starting 2026 Model Year
Rope Data - Dipper Trip - Diameter	0.75 in (1.90 cm) — Starting 2026 Model Year
Rope Data - Dipper Trip - No.	1 — Starting 2026 Model Year
Rope Data - Hoist - Diameter	2.75 in (6.98 cm) — Starting 2026 Model Year
Rope Data - Hoist - No.	2 — Starting 2026 Model Year
Rope Data - Note	High impact ropes available as an option — Starting 2026 Model Year
Rope Data - Retract - Diameter	2.50 in (6.35 cm) — Starting 2026 Model Year
Rope Data - Retract - No.	1 — Starting 2026 Model Year
Type	One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. — Starting 2026 Model Year

Lube System

Caterpillar 7495 with Rope Crowd Excavator Lube System specifications
Components (1)	Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room — Starting 2026 Model Year
Components (2)	External FastFil from lower level — Starting 2026 Model Year
Type	Automatic, single-line system for open gear lubricant and grease — Starting 2026 Model Year

Main Structures

Caterpillar 7495 with Rope Crowd Excavator Main Structures specifications
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard	36.00 ft (10.97 m) — Starting 2026 Model Year
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads	38.00 ft (11.58 m) — Starting 2026 Model Year
Ground Bearing Pressure - Note	Ground bearing pressure is dependent upon many factors — Starting 2026 Model Year
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads	36 m2 (380 kPa); 386 ft2 (55 psi) — Starting 2026 Model Year
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads	47 m2 (297 kPa); 501 ft2 (43 psi) — Starting 2026 Model Year
Hoist	A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. — Starting 2026 Model Year
Planetary Propel	Dual-motor independent drive — Starting 2026 Model Year
Swing	Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. — Starting 2026 Model Year
Upper Works Overall Width - Including Standard Walkways	41.90 ft (12.77 m) — Starting 2026 Model Year

Weights

Caterpillar 7495 with Rope Crowd Excavator Weights specifications
Ballast - Furnished By Customer	667,150.00 lbs (302,614.53 kg) — Starting 2026 Model Year
Working Weight - With Dipper and Standard Links	3,056,000.00 lbs (1,386,180.00 kg) — Starting 2026 Model Year

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon