Hitachi ZX245USLC-6 Excavator Specs

Category: Excavators ➔
Manufacturer: Hitachi ➔
Model: ZX245USLC-6 ➔

The Hitachi ZX245USLC-6 is a reduced-tail-swing crawler excavator in the ZX-6 series, designed for general earthmoving, utility work, trenching, and site preparation. It is commonly used in urban and confined job sites where swing clearance is limited. The machine features a short-radius upper structure, hydraulic excavator controls, and a tracked undercarriage for stability on uneven ground. The ZX245USLC-6 is typically equipped with a diesel engine, advanced hydraulic system, and operator cab with visibility and control features. It is used in construction, civil engineering, and infrastructure applications where maneuverability and digging performance are required.

Boom/Stick Excavator Option 1

Hitachi ZX245USLC-6 Excavator Boom/Stick Excavator Option 1 specifications
Arm Digging Force - ISO	15,511.90 lbs (7,036.09 kg)
Arm Digging Force - SAE	15,062.20 lbs (6,832.11 kg)
Bucket Digging Force - ISO	23,380.20 lbs (10,605.09 kg)
Bucket Digging Force - SAE	20,457.70 lbs (9,279.47 kg)
Max Cutting Height	30.50 ft (9.30 m)
Max Digging Depth	18.10 ft (5.52 m)
Max Digging Reach	27.60 ft (8.41 m)
Max Reach Along Ground	27.10 ft (8.26 m)
Max Vertical Wall Digging Depth	15.60 ft (4.75 m)
Max.Dumping Height	22.50 ft (6.86 m)

Boom/Stick Excavator Option 2

Hitachi ZX245USLC-6 Excavator Boom/Stick Excavator Option 2 specifications
Arm Digging Force - ISO	13,713.40 lbs (6,220.30 kg)
Arm Digging Force - SAE	13,488.60 lbs (6,118.33 kg)
Bucket Digging Force - ISO	23,380.20 lbs (10,605.09 kg)
Bucket Digging Force - SAE	20,457.70 lbs (9,279.47 kg)
Max Cutting Height	31.80 ft (9.69 m)
Max Digging Depth	19.70 ft (6.00 m)
Max Digging Reach	29.10 ft (8.87 m)
Max Reach Along Ground	28.70 ft (8.75 m)
Max Vertical Wall Digging Depth	17.10 ft (5.21 m)
Max.Dumping Height	23.70 ft (7.22 m)
Minimum swing radius	96.50 in (245.11 cm)

Capacities

Hitachi ZX245USLC-6 Excavator Capacities specifications
Cooling system	7.40 gal (28.01 l)
Diesel exhaust fluid (DEF) tank	4.30 gal (16.28 l)
Engine oil with filter	6.10 gal (23.09 l)
Fuel Tank	100.40 gal (380.01 l)
Hydraulic system	63.50 gal (240.35 l)
Hydraulic Tank	34.40 gal (130.20 l)
Propel	1.80 gal (6.81 l)
Swing drive	1.70 gal (6.43 l)

Cylinders

Hitachi ZX245USLC-6 Excavator Cylinders specifications
Bore (Arm)	5.40 in (13.72 cm)
Bore (Boom)	4.80 in (12.19 cm)
Bore (Bucket)	41.80 in (106.17 cm)
Rod Diameter (Arm)	3.80 in (9.65 cm)
Rod Diameter (Boom)	3.40 in (8.64 cm)
Rod Diameter (Bucket)	3.20 in (8.13 cm)
Stroke (Arm)	58.10 in (147.57 cm)
Stroke (Boom)	49.70 in (126.24 cm)
Stroke (Bucket)	2.80 in (7.11 cm)

Dimensions

Hitachi ZX245USLC-6 Excavator Dimensions specifications
Cab Height	9.50 ft (2.90 m)
Counterweight Clearance	2.80 ft (0.85 m)
Ground Clearance	1.40 ft (0.43 m)
Length	2,901.60 in (7,370.06 cm)
Undercarriage Overall Length	11.80 ft (3.60 m)

Electrical System

Hitachi ZX245USLC-6 Excavator Electrical System specifications
Alternator rating	50 amp
Batteries	2 volts
Battery capacity	651CCA
Work Lights	2 halogen

Engine

Hitachi ZX245USLC-6 Excavator Engine specifications
Aspiration	Turbocharged and charged air cooled
Cooling system	Direct-drive suction-type fan
Displacement	316.80 cu in (5,191.43 cu cm)
Emissions level	EPA Final Tier 4 / EU Stage IV
Engine Make	Isuzu
Engine Model	4HK1
Net Power	159.00 hp (118.57 kw)
Off-Level Capacity	70%
Power Measured @	2000 rpm

Hydraulic System

Hitachi ZX245USLC-6 Excavator Hydraulic System specifications
Controls	Pilot levers
Hydraulic System Type	Open center load sensing
Implement - Operating Pressure	4975 psi
Main pump - Maximum flow	162.00 gal (613.17 l)
Main pump type	3 variable-displacement axial-piston pumps
Travel - Operating Pressure	5149 psi

Operating Specifications

Hitachi ZX245USLC-6 Excavator Operating Specifications specifications
Operating Weight	56,879.30 lbs (25,800.05 kg)

Swing Mechanism

Hitachi ZX245USLC-6 Excavator Swing Mechanism specifications
Swing Speed	11.8 rpm

Undercarriage

Hitachi ZX245USLC-6 Excavator Undercarriage specifications
Drawbar Pull	11,216.00 lbs (5,087.50 kg)
Max Travel Speed	3.50 mph (5.63 kph)
Number of Carrier Rollers per Side	2
Number of Shoes per Side	49
Number of Track Rollers per Side	8

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon